•
Worm gear reduction for positive load holding
• Rugged construction
• Hydraulic power
• High capacity cable drum
• Frictionless bearings
• Full power reversible
• Cable tensioner for better cable tracking
APPLICATIONS
• All Purpose
Lifting and Pulling.
• Pulls Loads of Up to 10,000 lbs.
• Where Hydraulic Power Source Is Available.
• On Service and Hauling Trucks.
Construction
Features: • Heavy-duty angle base drilled for six (6)
1/2" bolts
(9/16" mounting holes) with no welding
required
• Fully sealed aluminum housings, with precision-cut
gears, run in an oil bath
• Stress-proof drum shaft
• Frictionless bearings
Drum
Cycle:
• 25% - 15 min/hr when operating at full load
Drum
Storage: • 1/8" - 1,000 ft •
1/4" - 250 ft
• 3/16" - 450 ft • 5/16"
- 150 ft
Gear
System: • 30:1
• Hardened steel worm and forged bronze worm gear
holds load in position when stopped
Note:
Our winch-hoist are rated for what they will vertically
lift.
Above data is based on the total load that may be pulled, single
line, up a given incline. All capacities are reduced 20% to
allow
for minimum friction in pull.
Note:
For best results, use the minimum amount of cable required
for application plus four safety turns around the drum. Cable
sold
separately. Length and size must be specified at time of order.
Note:
All speeds are based on one layer of cable on drum.
FRONT
VIEW
SIDE
VIEW
TOP
VIEW
Hydraulic Winch-Hoist,
Capstan Winch, Electric Winch, Electric Winches, Powered Winches,
Power Winch, Power
Winches, Spur Gear Winch, Thern, Winch, Winch Hoist, and Winches
from your source for material handling
equipment.
