•
Trifecta system 115 Volt brake
motor with triple brake
system for instant stopping
• Worm & worm gear drive for
positive load holding
• Improved dynamic braking and
brake motor
• Single phase motor
• Grooved drums for 1/4" cable
• Low voltage pendant control
• Many Available Options
APPLICATIONS
•
Handle Rolling Loads up to
20,000 lbs.
• Move Carts in and Out of
Production Areas
• Pull Trailers Through
Assembly Stations
• Pull Tarps or Covers over
Tanks and Pits
• Full Power Forward and
Reverse
Construction
Features: • Heavy-duty angle base drilled for six 1/2"
mounting
bolts. • Installation requires no welding. • Fully sealed aluminum gear housings, with precision-
cut gears, running in an oil bath. • Stress-proof drum shafts. • Frictionless bearings.
Gear
System: • 286:1 Gear Reduction • Hardened steel worm and forged bronze worm
gear hold load in position when stopped.
Power:
• Universal High Speed reversible brake motor, 1.25
HP • 6 Amp-No load • 15 amp - Full load • Standard 15' power cord plugs into any 115V
grounded AC outlet.
Duty
Cycle: • 25% - 15 min/hr.
Pulling
Capacity: • 20,000 Rolling load capacity • 800 lb. line pull • Rolling load capacity is dependent on floor surface
and wheel/caster condition.
Cable
Drums: • 2 Welded steel cable drums grooved for 1/4"
cable • Lower drum is gear driven • Upper drum not powered
Available
Factory Options: • 230 Volt Single Phase Motor • Freewheeling Clutch • Limit Switch • Emergency Hand Crank • Variable Speed Control • Radio Remote Control • High Speed Gears
Cable
Strength: • Recommended 1/4" diameter cable has 7000
lb.
breaking strength. Safe working load: 1400 lb.
line
pull
Shipping
Weight:
102 lbs
FRONT
VIEW
SIDE
VIEW
TOP
VIEW
Electric Cable
Loop Drive, Capstan Winch, Electric Winch, Electric Winches,
Powered Winches, Power Winch,
Power Winches, Spur Gear Winch, Thern, Winch, Winch Hoist,
and Winches from your source for material handling
equipment.
