•
Operates Off Truck Battery
• Pull Rolling Loads up to 30,000 lbs
• Mounts on Trucks or Trailers
• Long-Lift Applications
• Easily Portable From Job to Job
FEATURES
•
Worm gear reduction for positive load
holding
• Rugged construction
• 12 Volt permanent magnet motor
• 10' pendant control
• High-capacity cable drum
• Frictionless bearings
• Full power reversible
• Free-wheeling clutch
Order Online
Click the button of the item you wish to purchase.
Construction
Features: • Heavy-duty angle base drilled for six (6) 1/2"
bolts
(9/16" mounting holes) with no welding required. • Fully sealed aluminum housings, with precision-cut
gears, run in an oil bath. • Stress-proof drum shaft. • Frictionless bearings.
Gear
System: • 175:1 • Hardened steel worm and forged bronze worm
gear holds load in position when stopped.
Speeds: • 20 RPM: No-load drum speed • 10 FPM: No-load drum speed • 9 FPM: 1,250 lbs - single-line lift • 5 FPM: 2,500 lbs - double-line lift
Note: All speeds are based on one layer of
cable on drum.
Power:
• Reversible permanent magnet 12 Volt DC motor. • 10 amp - No load. • 100 amp - Full load.
Duty
Cycle: • 25% - 15 min/hr when operating at full load
Drum
Storage: Model No. 10-12 Model
No. 20-12
• 1/8" - 1,000 •
1/8" - 285' • 3/16" - 450' •
3/16" - 125' • 1/4" - 250' •
1/4" - 70' • 5/16" - 150' •
5/16" - 45'
For best results, use the minimum amount of cable
required for application. Maintain four wraps of
cable on the drum at all times. Cable sold separately.
Length and size must be specified at time of order.
Lifting
Capacity: • 1,250 lbs - 1-2 layers of cable (39' of 1/4"
cable) • 1,050 lbs - 3 layers of cable (65' of 1/4"
cable) • 750 lbs - full drum of cable (250' of 1/4"
cable)
Pulling
Capacity:
• 10% (6°): 10,000 lbs •
60% (31°): 1,900 lbs • 20% (11°): 5,000 lbs •
80% (39°): 1,600 lbs • 40% (22°): 2,600 lbs •
100% (45°): 1,400 lbs
Winch-hoists are rated for what they will vertically
lift. Above data is based on the total load that may
be pulled, single line, up a given incline. All capacities
are reduced 20% to allow for minimum friction in pull.
Cable
Strength: • Safe working load is 20% of breaking strength. • Top-quality galvanized cable available in the
following breaking strengths:
1/8" - 2,000 lbs 1/4"
- 7,000 lbs
3/16" - 4,200 lbs 5/16"
- 9,800 lbs
Factory-Installed
Options: • No Clutch • High Speed Gears • Hand Crank • Upside-Down Mounting • Alternate Drums
Shipping
Weight:
74 lbs
FRONT
VIEW
SIDE
VIEW
TOP
VIEW
Battery Powered
Winch-Hoist, Capstan Winch, Electric Winch, Electric Winches,
Powered Winches, Power
Winch, Power Winches, Spur Gear Winch, Thern, Winch, Winch
Hoist, and Winches from your source for material
handling equipment.
