Description:
Senora III medium sized concrete round
planter. Includes (2) 5/8" dia. lifting inserts on interior
of planter for lifting. Inserts are ONLY to be used
when planter is EMPTY. Size: 30" dia. x 24" Unit Weight/Unit Capacity: 390 lbs. Weight: 380 lbs. Material: Reinforced Precast Concrete. Wall Thickness: 2-3/4" at the top with a 2% pitch. Reservoir System: Available. Reinforcing: 1/4" Dia. Steel rebar.
Drain
Hole: 2" Anchoring: Includes (4) 1/2" threaded
inserts on bottom for optional anchoring. Maintenance: Rinse periodically with water
& mild detergent. Reseal annually. Packaging: Banded to pallet.
*Image
shows smooth lip which is no longer available.
Planter lip is now done in acid wash.
Available Colors
RESERVOIR
PLANTER SPECIFICATIONS
2.1
MATERIALS
A. Non-woven Polypropylene wicks of synthetic
fiber; resistant to fungus and mildew; indigestible to insects.
B. (1) - 2" Dia. hot dipped galvanized
steel fill pipe.
C. (1) - porous membrane (same material as
wicks).
D. (1) - thick foam insulation, custom fitted
to contours to specified planter.
E. (1) - hot dipped galvanized pipe strap.
F. (1) - 5/8" Dia. stainless steel bolt.
G. (1) - Rubber plug with compression key
lock.
H. Stainless steel drain lines (cast directly
into planters).
GENERAL
PLANTER SPECIFICATIONS
1.1
SUMMARY
A. Section includes: Furnish Precast Concrete
Planter indicated
on drawings or specified
herein. 1.2 REFERENCES
A. American Society for Testing & Materials
1. ASTM C33 2.
ASTM C150 3. ASTM C31 1.5 SUBMITTALS
A. Submit product data, shop drawings and
Samples.
1. Product Data: Manufacturer's
specifications and technical data
edited
specifically for proposed system, including the following
specific
information:
a.
Detailed specification of construction fabrication.
b.
Manufacturer's installation instructions
c.
Maintenance literature
d.
Product warranty
2. Shop Drawings:
Indicate pertinent dimensions, general
construction,
component connections anchoring methods,
hardware
and installation procedures.
3. Samples as requested
by Architect. 1.6 QUALITY ASSURANCE
A. Qualifications of Manufacturer: Manufacturer
to be prequalified
by specifier prior
to bidding. Failure to comply will result in
disqualification
of bid. Manufacturer to have at least five
years experience
in the manufacturer of precast concrete planters
field proven
for at least five years. 1.10 WARRANTY
Manufacturer shall submit a written warranty for precast products
for
the period of two years upon acceptance of products. 2.2 MATERIALS
A. Portland Cement: ASTM C150 specifications
for Portland
Cement.
B. Aggregates: All aggregates to meet ASTM
C33 specifications,
to be cleaned of
foreign matter and properly graded to size.
C. Coloring: Pigments used shall be inorganic,
resistant to alkalinity
and used as per manufacturers
recommendations.
Concrete Planters,
Planters, Security Planters, Cement Planter, Commercial Concrete
Planter, Concrete Security
Planters, Flower Planters, Site Furnishings, and Steel Planters
from your source for material handling equipment.
