Create
curb appeal with beautiful Polysteel planters! The perfect
balance to any landscape design, the polyvinyl-coated planters
are built with the same high-quality standards as our furniture.
The standard square planter size is 26" x 26" x 18".
Custom sizes are available.
Add
a brass plate to your planter in honor
or memory of someone special
Specifications
for Planter Base is made of 10 gauge HR steel. Optional surface
mounting plate included. Top is made of 16 gauge HR steel. Receptacle Arch Lid is made of 16 gauge HR steel. Side Bars are made of 11 gauge steel Expanded Metal Sides for square receptacle and planter
are made of ¾" #9 expanded metal.
Round receptacle sides are made of ¾" #9 flat
expanded metal. Welded Rod Sides are made of .192 welded rod. Laser Cut Steel Sides are 12 gauge HR steel. Perforated Sides are made of 14 gauge steel.
All above are coated with UV and fungus resistant plastisol
to a thickness of 1/8". All hardware is .305 stainless
steel.
Specifications for Plastisol (PVC) Poly-Vinyl Chloride
Coating
Material: Plastisol (PVC)
shall have: Antimicrobial
(non-leaching) to help prevent microbiological attack
on the plastisol (PVC) surface that
can
cause the loss of aesthetic appearance, mildew odors, embrittlement
and premature product failure.
Testing
Data available Per ASTM G21-90.
Tensile
strength of no less than 1800 psi per ASTM D412.
Elongation
of no less than 200% per ASTM D412
Tear
strength of no less than 300lb/in per ASTM D624.
Hardness
of 90 ± 5 (Durometer, Shore A (Instant)) per ASTM D2240. Flammability
– Pass per FMVSS 302 UV
stabilized – guaranteed to not show significant fading
for 5 years per written warranty
Process: Prior to plastisol
coating, each part shall be chemically washed, dried, heated
and coated in a heat
activated
primer and dried. After drying, each part shall be pre-heated
in a convection oven to a temperature
of
no less than 400° F, dipped into liquid Plastisol (PVC)
and cured in a convection oven at a
temperature
no less than 350° F. All parts shall have a coating
thickness of .125"-.25".
Polysteel products are completely plastisol coated (frames
and legs included) with a thick, UV stabilized,
mold and mildew resistant plastisol coating which is compliant
with worldwide standards. Polysteel is
committed to being an environmentally conscious company and
recognizes the importance of being committed
to continually finding ways to support our environment.
Plastisol Coated
Planters, Planters, Security Planters, Polysteel Planter,
Commercial Planter, Steel Security Planters,
Flower Planters, Site Furnishings, and Steel Planters from
your source for material handling equipment.
