FS Industries ENGINEERED STEEL PRODUCTS
Priced Full Line Products Catalog
20 Technology Way West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401) 421-5679
Home Order Search Quote Contact Us About Us My Account Shopping Cart
Back to Product Category

MaxBullet® Truck Mount System

NO TOOLS REQUIRED FOR HANGING STRIPS
MAXBULLET STRIP DOOR HARDWARE

Superior quality strips require world class hardware. State-
of-the-art MaxBullet technology features a bullet shaped
locking system for easy snap on/snap off strip installation.
The combination of Clear-Flex® II strips with MaxBullet
hardware creates the most time-saving and energy-efficient
strip door solution on the market.
Reduce installation
   time by 75%
Reduce replacement
   strip time by 90%
Pair MaxBullet with
   Clear-Flex II strips for
   the ultimate strip door
   installation

Hi-Viz® Fluorescent Safety Rings are placed on
the studs of the MaxBullet® hardware to indicate
the top of the door opening in low light conditions.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Part No. of the item you wish to purchase.


PRICING
PART #
DESCRIPTION
PRICE
MaxBullet Truck Mount Complete Strip Door Kit (8'w x 8'h - 8" x.198 Low Temp
Scratch-Guard® Strips with 50% Overlap; MaxBullet® Truckmount Hardware
Kit; Hi-Viz® Fluorescent Safety Rings)
$734
REPLACEMENT PARTS
Refrigerated Trailer Strip Door Replacement Strips:
(16 - 8" x.198 Low Temp Scratch-Guard® Ribbed Strips, 8' long)
$454
Hi-Viz® Fluorescent Safety Rings (Package of 10)
$4.30

MaxBullet Truck Mount System Installation Instructions
PARTS INCLUDED: TOOLS NEEDED:
1) 8 ft. MaxBullet Mounting Bar
(2) L-brackets
(4) 1/4” x 1 1/2” Self-Tapping Screws
(4) 1/4” x 3/4” Bolts
(4) Locknuts
Scratch-Guard Material & Hi-Viz
   Safety Rings*
Pen or Pencil
Drill with 1/4” Bit
Adjustable Wrenches
Saw (as needed)
Ladder
Tape Measure
Utility Knife
* Number of strips and safety rings dependent upon strip size and overlap
INSTALLATION
truck strip doors truck mounted strip doors
Figure B
Figure C
Figure A
Step 3 Measure width of trailer
and, if necessary, cut mounting bar
to length using saw.
Step 2 Using the self-tapping screws
provided, install L-bracket on stud
as close to roller track as possible
without impeding movement of door
on track. Repeat for other side.
Step 1 For trailers with roll-up
doors
, locate the stud closest to
the door opening in the rear of the
trailer.
Step 4 Place mounting bar on
L-brackets and using L-bracket
as a template, mark holes and drill
with a 1/4” drill bit.
NOTE: For trailers with swing
doors, mount bar as close to top of
trailer as possible. Be sure to leave
room for mounting bar and bolts,
approximately 1” from top.
NOTE: Remember to leave
room for mounting bar.
vinyl strip doors plastic strip doors
Figure D
Figure E
Figure F
Step 5 Mount bar to L-brackets
using the provided bolts and
locknuts.
Step 6 Install PVC strips using
preferred amount of overlap. Refer
to diagram on bottom of this
page for details on strip placement
Step 7 Place Hi-Viz safety rings
on bullets where strips overlap
(see Figure F).
Step 8 The strips should be trimmed
to leave 1/4” of clearance from the
floor surface. Use a common utility
knife to score and then tear
the strips by hand.
STRIP PLACEMENT GUIDE
PARTIAL OVERLAP
FULL OVERLAP
6“ WIDE
MATERIAL
truck mounted strip doors
8“ WIDE
MATERIAL
doors
12“ WIDE
MATERIAL
insect barrier doors

MaxBullet, Aleco Strip Doors, Plastic Strip Door, PVC Strip Door, Strip Door, Strip Doors, Vinyl Strip Door, Welding Strip, Truck
Mount Strip Door, Insect Barrier, and Traffic Doors from your source for material handling equipment.
Back to Product Category
Visa - MasterCard - AMEX
Home - Order - Search - Quote - Contact Us - About Us - My Account - Shopping Cart