 |
ENGINEERED
STEEL PRODUCTS |
| Priced
Full Line Products Catalog |
20
Technology Way • West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401)
421-5679 |
|
|
|
|
Back to Product Category
TCK Air
Powered Hoists with Pendant and Cord Controls
and Hook Suspension |
|
|
|
|
TCK
air powered air hoists are the best choice for low headroom and fast lifting
requirements in demanding
industrial settings. These hoists are extremely durable, are packed with
top quality features and will far exceed
workplace demands. |
|
|
|
|
 |
|
Features and
Benefits |
Standard Hoist
Specifications |
|
|
|
|
Unlimited
Duty Cycle
For continuous operation
Spring-Loaded Multi-Vane
Motor Design
Permits very fine feathering control
Cast Iron Housing
For strength and durability
Powder Coated Finish
Proven weather resistant in harsh
environments
Internal Disc Brake
Protected from harsh environments
Extremely Fast Lifting
For applications where speed is critical
Low Noise Levels
Adds to operator comfort
Overload Limiter
Adjustable load limiter detects over-
load automatically and blocks air
flow for lifting
Nickel-Plated Load Chain
Resistant to corrosion, abrasion and wear |
Capacity
Range
3 – 6 Ton
Standard Lift
10'
(longer lifts available)
Standard Pendant or Cord Length
Hangs approximately 4 ft. above the
hoist’s fully extended bottom hook
(longer lengths available)
Air Supply Requirement
60 – 90 psi
Air Filtration
Maximum 5 micron air filter or finer required
Air Inlet Port
1" NPT
Air Supply Hose Minimum Size
3/4"
Air Lubrication Requirement
Minimum 10 – 15 drops of oil
per minute (0.2 – 0.3 cc/min.)
Temperature Range
+14° – 140°F
Chain Containers
Optional
Canvas or Steel |
|
|
|
|
|
TCK3000P |
|
|
|
|
| TCK
SERIES PENDANT MODEL—SPECIFICATIONS |
Cap.
(Tons) |
Product
Code |
Std.
Lift
(ft.) |
Push
Button
Hose
L (ft) |
Up/Down
Speeds
(ft/min @ 90 psi) |
Up/Down
Air Consumption Rates
(cubic ft/min @ 90 psi) |
Load
Chain
Dia. x
Chain
Fall
Lines |
Net
Wgt.
(lbs) |
Wgt.
For Add
One
Foot
of Lift
(lbs) |
No
Load |
Full
Load |
No
Load |
Ful
Load |
3 |
TCK3000P |
10 |
8.6 |
37/23 |
18/38 |
148/141 |
124/152 |
12.5x1 |
225 |
2.3 |
6 |
TCK6000P2 |
10 |
8.6 |
18/12 |
9/19 |
148/141 |
124/152 |
12.5x2 |
295 |
4.6 |
|
| PENDANT MODEL—DIMENSIONS |
Cap.
(Tons) |
Product
Code |
Headroom
C (in) |
a
(in) |
b
(in) |
d
(in) |
e
(in) |
g
(in) |
h
(in) |
i
(in) |
j
(in) |
3 |
TCK3000P |
21.1 |
22.7 |
12.3 |
10.4 |
12.2 |
1.3 |
7.4 |
4.9 |
1.3 |
6 |
TCK6000P2 |
30.3 |
22.7 |
14.6 |
10.4 |
12.2 |
1.7 |
9.6 |
5.0 |
3.5 |
|
|
| CORD MODEL—SPECIFICATIONS |
Cap.
(Tons) |
Product
Code |
Std.
Lift
(ft.) |
Cord
L (ft) |
Up/Down
Speeds
(ft/min @ 90 psi) |
Up/Down
Air Consumption Rates
(cubic ft/min @ 90 psi) |
Load
Chain
Dia. x
Chain
Fall
Lines |
Net
Wgt.
(lbs) |
Wgt.
For Add
One
Foot
of Lift
(lbs) |
No
Load |
Full
Load |
No
Load |
Ful
Load |
3 |
TCK3000C |
10 |
7.3 |
37
/ 23 |
18
/ 38 |
148
/ 141 |
124
/ 152 |
12.5
x 1 |
223 |
2.3 |
6 |
TCK6000C2 |
10 |
7.3 |
18
/ 12 |
9/19 |
148
/ 141 |
124
/ 152 |
12.5
x 2 |
293 |
4.6 |
|
| CORD MODEL—DIMENSIONS |
Cap.
(Tons) |
Product
Code |
Headroom
C (in) |
a
(in) |
b
(in) |
d
(in) |
e
(in) |
g
(in) |
h
(in) |
i
(in) |
j
(in) |
3 |
TCK3000C |
21.1 |
22.7 |
12.3 |
10.4 |
12.2 |
1.3 |
7.4 |
4.9 |
1.3 |
6 |
TCK6000C2 |
30.3 |
22.7 |
14.6 |
10.4 |
12.2 |
1.7 |
9.6 |
5 |
3.5 |
|
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
PRICING
FOR TCK SERIES - HOOK MOUNT |
|
Cap.
(Tons) |
Product
Code |
Maximum
Speed (FPM) |
Std.
Lift
Ft. |
Price |
Extra
Lift (ft) |
| Up |
Down |
Cord |
Net
Weight
(lbs) |
Pendant |
Net
Weight
(lbs) |
Load
Chain |
Cord |
Pendant
Hose* |
With
Load |
W/O
Load |
With
Load |
W/O
Load |
3 |
TCK3000C/P |
18 |
37 |
38 |
23 |
10 |
|
223 |
|
225 |
|
|
|
6 |
TCK6000C/P2 |
9 |
18 |
19 |
12 |
10 |
|
293 |
|
295 |
|
|
Std.
pendant hangs approximately 4 ft. above the hoist's fully extended bottom
hook.
For lift, cord and pendant length limitations, consult us. |
| * WACSP - additional assembly charge - $276.20.
applies for any special pendant length shorter or longer than our standard
length. |
| C
= cord control P = pendant control |
|
|
| Canvas
Chain Containers for TCK Cord and Pendant Models |
|
Cap.
(Tons) |
Product
Code |
Price |
Max.
Lift (ft.) |
3 |
TCK42580655C |
|
20 |
6 |
TCK42580655C |
|
10 |
|
|
|
|
|
| TCK
/ TCKM SERIES OPTIONS |
|
|
|
|
| Code
7064404 - Filter Kit ............................................................................................................. |
$396.20 ea. |
|
| (Kit
includes the filter. For components to mount to the hoist, consult us) |
|
|
|
|
| Code
7064405 - Lubricator Kit ...................................................................................................... |
$318.20 ea. |
|
| (Kit
includes the lubricator. For components to mount to the hoist, consult us) |
|
|
|
|
| Code
7064403 - Filter / Lubricator Kit ......................................................................................... |
$591.60 ea. |
|
| (Kit
includes the filter and lubricator. For components to mount to the hoist,
consult us) |
|
|
$579.70 ea. |
|
| Code
7064402 - Filter Regulator Kit ............................................................................................. |
|
|
|
| (Kit
includes the filter and regulator. For components to mount to the hoist,
consult us) |
|
|
|
|
TCK Air
Powered Hoists with Air Powered Trolley |
|
|
|
|
TCK
air powered hoists can be used with our air powered trolleys for added mobility.
The MCR air powered trolley is the ideal choice for transporting medium
to heavy loads
in construction and foundry applications. |
|
|
|
|
 |
|
Features and
Benefits |
Standard Hoist
Specifications |
|
|
|
|
Unlimited
Duty Cycle
For continuous operation
Spring-Loaded Multi-Vane
Motor Design
Permits very fine feathering control
Cast Iron Housing
For strength and durability
Powder Coated Finish
Proven weather resistant in harsh
environments
Internal Disc Brake
Protected from harsh environments
Drop Stops & Rubber Bumpers
To ensure safe operation
Side Guide Rollers
Provide additional stability and
smooth travel
Versatile Wheels
Fit flat or tapered beam flange
Trolley Muffler
Produces low noise levels
Nickel-Plated Load Chain
Resistant to corrosion, abrasion
and wear |
Capacity
Range
3 – 6 Ton
Control Option on Trolley/Hoist
TCKM—Pendant control only
Standard Pendant Length
Hangs approximately 4 ft. above the
hoist’s fully extended bottom hook
(longer lengths available)
Air Supply Requirement
53 cfm at 60 – 90 psi
Air Filtration
Maximum 5 micron air filter or finer
required
Air Inlet Port
3/4" NPT
Air Supply Hose Minimum Size
3 – 6 Tons —3/4"
Air Lubrication Requirement
Minimum 10 – 15 drops of oil
per minute (0.2 – 0.3 cc/min.)
Operating Conditions
Temperature range +14° to 140°F
Humidity 85% or less |
|
|
|
|
|
TCKM3000P |
|
|
|
|
| PENDANT
MODEL WITH AIR POWERED TROLLEY —SPECIFICATIONS |
Cap.
(Tons) |
Product
Code |
Std.
Lift
(ft.) |
Push
Button
Hose
L (ft) |
Up/Down
Speeds
(ft/min @90 psi) |
Traversing
Speed
(ft/min) |
Air
Consumption Rates
(cfm @90 psi) |
Flange
Width
Adj
B (in) |
Min.
Allow.
Radius
for Curve
(in) |
Load
Chain
Dia.
(mm)
x Chain
Fall
Linets |
Net
Wgt.
(lbs) |
Wgt.
For Add.
One Foot
of Lift
(lbs) |
No
Load |
Full
Load |
TCR |
MCL |
No
Load |
Full
Load |
No
Load
Full
Load |
3 |
TCKM3000P |
10 |
8.6 |
37
/ 23 |
18
/ 38 |
65 |
148
/ 141 |
124
/ 152 |
53 |
3.94
to 6.02 |
51.2 |
12.5x1 |
326 |
2.3 |
6 |
TCKM6000P2 |
18
/ 12 |
9/19 |
148
/ 141 |
124
/ 152 |
4.92
to 7.02 |
78.7 |
12.5x2 |
461 |
4.6 |
|
| PENDANT
MODEL WITH AIR POWERED TROLLEY—DIMENSIONS |
Cap.
(Tons) |
Product
Code |
Headroom
C (in) |
b
(in) |
b'
(in) |
d
(in) |
e
(in) |
e'
(in) |
g
(in) |
i
(in) |
j
(in) |
k
(in) |
m
(in) |
n
(in) |
r
(in) |
t
(in) |
3 |
TCKM3000P |
29.5 |
13.4 |
17.4 |
10.5 |
6.9 |
3.9 |
1.3 |
4.9 |
1.4 |
5 |
5.1 |
5.5 |
2.8 |
1.7 |
6 |
TCKM6000P2 |
34.1 |
15.7 |
19.8 |
10.8 |
8.1 |
4.3 |
1.7 |
5.5 |
1.4 |
5.5 |
5.7 |
6.1 |
3.9 |
2.3 |
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
PRICING
FOR TCKM SERIES - PENDANT CONTROL |
|
Cap.
(Tons) |
Product
Code |
Maximum
Speed (FPM) |
Std.
Lift
Ft. |
Price |
Extra
Lift (ft) |
| Up |
Down |
Pendant |
Net
Weight
(lbs) |
Load
Chain |
Pendant
Hose* |
With
Load |
W/O
Load |
With
Load |
W/O
Load |
3 |
TCKM3000P |
18 |
37 |
38 |
23 |
10 |
|
326 |
|
|
6 |
TCKM6000P2 |
9 |
18 |
19 |
12 |
10 |
|
461 |
|
|
Std.
pendant hangs approximately 4 ft. above the hoist's fully extended bottom
hook.
For lift and pendant length limitations, consult us. For lifts or pendant
lengths other than standard, use 10 ft. base price plus adders
for load chain and pendant control |
| * WACSP - additional assembly charge - $356.80.
applies for any special pendant length shorter or longer than our standard
length. |
| P = pendant control |
|
| MCR
MOTORIZED TROLLEY SHAFT EXTENDERS |
|
Cap.
(Tons) |
Std.
Flange
Width (in.) |
Flange
Width
w/Est. Shaft (in.) |
Price |
3 |
3.94
- 6.02 |
6.03-7.02 |
|
|
| 7.03-12.00 |
6 |
4.92
- 7.02 |
7.03-9.00 |
|
9.01-11.00 |
|
|
|
For
flange ranges beyond this chart, consult us.
Pricing applies only when purchased with MCR trolley. |
|
|
TCK
AIR POWERED HOISTS WITH PUSH TROLLEY |
|
|
|
TCK air powered hoists can be used with our push trolleys for added mobility.
The economical PT manual trolleys
are perfect for lighter, infrequent moves and in small workshops. |
|
|
|
 |
|
|
|
Features
and Benefits |
|
|
|
Manual Trolleys |
|
Shafts
Standard shafts fit wide range of beams
Longer shafts available for larger beams
Spacers for easy adjustments
Wheels
All steel
Sealed ball bearings
Fit flat or tapered beam flange |
|
|
|
Standard
Hoist Specifications |
|
Capacity
Range
3 – 6 Ton
Control Option on Hoist
TCKP—Pendant and cord
Standard Hand Chain Length
On geared trolleys Hangs approximately
2' less than fully extended bottom hook
(longer lengths available) |
|
|
TCKP3000P |
|
|
|
|
|
TCKP
Air Powered Hoists with Push Trolley - Specs & Dimensions |
|
| PENDANT
MODEL WITH PUSH TROLLEY—SPECIFICATIONS |
Cap.
(Tons) |
Product
Code |
Std.
Lift
(ft.) |
Push
Button
Hose
L (ft) |
Up/Down
Speeds
(ft/min @90 psi) |
Up/Down
Air Consuption
Rates (cfm @90 psi) |
Flange
Width
Adjustability
B (in) |
Min.*
Allow.
Radius for
Curve
(in) |
Load
Chain
Dia.
(mm) x
Chain
Fall
Linets |
Net
Wgt.
(lbs) |
Wgt.
For
Add.
One Foot
of Lift
(lbs) |
No
Load |
Full
Load |
No
Load |
Full
Load |
Std. |
Optional |
3 |
TCKP3000P |
10 |
8.6 |
37
/ 23 |
18
/ 38 |
148
/ 141 |
124
/ 152 |
3.23
to 6.02 |
6.03
to 12.00 |
25.6 |
12.5x1 |
269 |
2.3 |
6 |
TCKP6000P2 |
18
/ 12 |
9/19 |
148
/ 141 |
124
/ 152 |
5.50
to 8.66 |
8.67
to 12.00 |
118.1 |
12.5x2 |
505 |
4.6 |
|
| *Minimum
flange width for curved beam: 3 Ton Push and Geared = 3.50 in |
|
| CORD
MODEL WITH PUSH TROLLEY—SPECIFICATIONS |
|
Cap.
(Tons) |
Product
Code |
Std.
Lift
(ft.) |
Cord
L (ft) |
Up/Down
Speeds
(ft/min @90 psi) |
Up/Down
Air Consuption
Rates (cfm @90 psi) |
Flange
Width
Adjustability
B (in) |
Min.*
Allow.
Radius for
Curve
(in) |
Load
Chain
Dia.
(mm) x
Chain
Fall
Linets |
Net
Wgt.
(lbs) |
Wgt.
For
Add.
One Foot
of Lift
(lbs) |
No
Load |
Full
Load |
No
Load |
Full
Load |
Std. |
Optional |
3 |
TCKP3000C |
10 |
7.3 |
37
/ 23 |
18
/ 38 |
148
/ 141 |
124
/ 152 |
3.23
to 6.02 |
6.03
to 12.00 |
25.6 |
12.5x1 |
269 |
2.3 |
6 |
TCKP6000C2 |
18
/ 12 |
9/19 |
148
/ 141 |
124
/ 152 |
5.50
to 8.66 |
8.67
to 12.00 |
118.1 |
12.5x2 |
505 |
4.6 |
|
|
| *Minimum
flange width for curved beam: 3 Ton Push and Geared = 3.50 in |
| PENDANT
AND CORD MODEL WITH PUSH TROLLEY—DIMENSIONS |
Cap.
(Tons) |
Product
Code |
Headroom
C (in) |
a
(in) |
b
(in) |
e
(in) |
g
(in) |
h
(in) |
i
(in) |
j
(in) |
k
(in) |
m
(in) |
n
(in) |
r
(in) |
t
(in) |
3 |
TCKP3000C/P |
21.5 |
12.6 |
12.8 |
3.1 |
1.3 |
5.8 |
3.94 |
1.2 |
5.3 |
3.1 |
6.0 |
2.7 |
1.42 |
6 |
TCKP6000C2/P2 |
33.4 |
17.6 |
18.9 |
4.1 |
1.7 |
7.3 |
6.10 |
3.5 |
6.7 |
3.4 |
7.7 |
6.0 |
2.76 |
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
PRICING
FOR TCKP SERIES - PUSH TROLLEY |
|
Cap.
(Tons) |
Product
Code |
Maximum
Speed (FPM) |
Std.
Lift
Ft. |
Price |
Extra
Lift (ft) |
| Up |
Down |
Cord |
Net
Weight
(lbs) |
Pendant |
Net
Weight
(lbs) |
Load
Chain |
Cord |
Pendant
Hose* |
With
Load |
W/O
Load |
With
Load |
W/O
Load |
3 |
TCKP3000C/P |
18 |
37 |
38 |
23 |
10 |
|
269 |
|
271 |
|
|
|
6 |
TCKP6000C/P2 |
9 |
18 |
19 |
12 |
10 |
|
505 |
|
507 |
|
|
Std.
pendant hangs approximately 4 ft. above the hoist's fully extended bottom
hook.
For lift, cord and pendant length limitations, consult us. |
| * WACSP - additional assembly charge - $276.20.
applies for any special pendant length shorter or longer than our standard
length. |
| C
= cord control P = pendant control |
|
| MANUAL
TROLLEY SHAFT EXTENDERS |
|
Cap.
(Tons) |
Std.
Flange Width (in.) |
Flange
Width w/Est. Shaft (in.) |
Price |
3 |
3.23
- 6.02 |
6.03
- 12.00 |
|
8 |
5.50-8.66 |
8.67
- 12.00 |
|
|
|
|
TCK
AIR POWERED HOISTS WITH GEARED TROLLEY |
|
|
|
TCK air powered hoists can be used with our geared trolleys for added mobility.
The economical GT manual trolleys
are perfect for lighter, infrequent moves and in small workshops. |
|
|
|
 |
|
|
|
Features
and Benefits |
|
|
|
Manual Trolleys |
|
Shafts
Standard shafts fit wide range of beams
Longer shafts available for larger beams
Spacers for easy adjustments
Wheels
All steel
Sealed ball bearings
Fit flat or tapered beam flange |
|
|
|
Standard
Hoist Specifications |
|
Capacity
Range
3 – 6 Ton
Control Option on Hoist
TCKG—Pendant and cord
Standard Hand Chain Length
On geared trolleys Hangs approximately
2' less than fully extended bottom hook
(longer lengths available) |
|
|
TCKG3000P |
|
|
|
|
|
TCKG
Air Powered Hoists with Geared Trolley - Specs & Dimensions |
|
| PENDANT
MODEL WITH GEARED TROLLEY—SPECIFICATIONS |
Cap.
(Tons) |
Product
Code |
Std.
Lift
(ft.) |
Push
Button
Hose
L (ft) |
Up/Down
Speeds
(ft/min @90 psi) |
Up/Down
Air Consuption
Rates (cfm @90 psi) |
Flange
Width
Adjustability
B (in) |
Min.*
Allow.
Radius for
Curve
(in) |
Load
Chain
Dia.
(mm) x
Chain
Fall
Linets |
Net
Wgt.
(lbs) |
Wgt.
For
Add.
One Foot
of Lift
(lbs) |
No
Load |
Full
Load |
No
Load |
Full
Load |
Std. |
Optional |
3 |
TCKG3000P |
10 |
8.6 |
37
/ 23 |
18
/ 38 |
148
/ 141 |
124
/ 152 |
3.23
to 6.02 |
6.03
to 12.00 |
66.9 |
12.5x1 |
287 |
2.9 |
6 |
TCKG6000P2 |
18
/ 12 |
9/19 |
148
/ 141 |
124
/ 152 |
5.50
to 8.66 |
8.67
to 12.00 |
118.1 |
12.5x2 |
553 |
5.2 |
|
| *Minimum
flange width for curved beam: 3 Ton Push and Geared = 3.50 in |
|
| CORD
MODEL WITH GEARED TROLLEY—SPECIFICATIONS |
|
Cap.
(Tons) |
Product
Code |
Std.
Lift
(ft.) |
Cord
L (ft) |
Up/Down
Speeds
(ft/min @90 psi) |
Up/Down
Air Consuption
Rates (cfm @90 psi) |
Flange
Width
Adjustability
B (in) |
Min.*
Allow.
Radius for
Curve
(in) |
Load
Chain
Dia.
(mm) x
Chain
Fall
Linets |
Net
Wgt.
(lbs) |
Wgt.
For
Add.
One Foot
of Lift
(lbs) |
No
Load |
Full
Load |
No
Load |
Full
Load |
Std. |
Optional |
3 |
TCKG3000C |
10 |
7.3 |
37
/ 23 |
18
/ 38 |
148
/ 141 |
124
/ 152 |
3.23
to 6.02 |
6.03
to 12.00 |
66.9 |
12.5x1 |
284 |
2.9 |
6 |
TCKG6000C2 |
18
/ 12 |
9/19 |
148
/ 141 |
124
/ 152 |
5.50
to 8.66 |
8.67
to 12.00 |
118.1 |
12.5x2 |
551 |
5.2 |
|
|
| *Minimum
flange width for curved beam: 3 Ton Push and Geared = 3.50 in |
|
 |
|
| PENDANT
AND CORD MODEL WITH GEARED TROLLEY—DIMENSIONS |
Cap.
(Tons) |
Product
Code |
Headroom
C (in) |
E
(ft) |
a
(in) |
b
(in) |
e
(in) |
g
(in) |
h
(in) |
i
(in) |
j
(in) |
k
(in) |
k'
(in) |
m
(in) |
n
(in) |
r
(in) |
t
(in) |
u
(in) |
3 |
TCKG3000C/P |
21.5 |
9.8 |
31.2 |
12.8 |
15.9 |
1.3 |
5.8 |
3.94 |
1.2 |
5.3 |
4.5 |
3.1 |
6.0 |
2.7 |
1.42 |
7.2 |
6 |
TCKG6000C2/P2 |
33.4 |
10.8 |
29.7 |
18.9 |
14.6 |
1.7 |
7.3 |
6.10 |
3.4 |
6.7 |
6.5 |
3.4 |
7.7 |
6.0 |
2.76 |
8.4 |
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
PRICING
FOR AIR HOIST WITH GEARED TROLLEY- TCLG SERIES |
Cap.
(Tons) |
Product
Code |
Maximum
Speed (FPM) |
Std.
Lift
Ft. |
Price |
Extra
Lift (ft) |
| Up |
Down |
Cord |
Net
Wgt.
(lbs) |
Pendant |
Net
Wgt.
(lbs) |
Load
Chain |
Add.
Trolley Hand
Chain |
Pull
Cord |
Pendant
Hose* |
With
Load |
W/O
Load |
With
Load |
W/O
Load |
3 |
TCKG3000C/P |
18 |
37 |
38 |
23 |
10 |
|
284 |
|
287 |
|
|
|
|
6 |
TCKG6000C/P2 |
9 |
18 |
19 |
12 |
10 |
|
551 |
|
553 |
|
|
Std.
pendant hangs approximately 4 ft. above the hoist's fully extended bottom
hook. For lift, cord and pendant length limitations,
consult us. Maximum pendant drop is 40 ft. Standard hand chain drop is included
in base price of geared trolleys. |
| * WACSP - additional assembly charge - $276.20.
applies for any special pendant length shorter or longer than our standard
drop. |
| C
= cord control P = pendant control |
|
| MANUAL
TROLLEY SHAFT EXTENDERS |
|
Cap.
(Tons) |
Std.
Flange Width (in.) |
Flange
Width w/Est. Shaft (in.) |
Price |
3 |
3.23
- 6.02 |
6.03
- 12.00 |
|
8 |
5.50-8.66 |
8.67
- 12.00 |
|
|
|
|
Air Powered Hoists, TCK,
Air Operated Hoists, Air Hoist, Air Powered Hoist, Chain Hoists, Air Chain
Hoists, Trolleys,
Hoists, Harrington, and Shop Air Chain Hoists from your source for material
handling equipment. |
Back
to Product Category |
 |
|
