FS Industries ENGINEERED STEEL PRODUCTS
Priced Full Line Products Catalog
20 Technology Way West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401) 421-5679
Home Order Search Quote Contact Us About Us My Account Shopping Cart
Back to Product Category

T-1DT SERIES - 1400

For door openings up to 8' wide x up to 12' high with inclined driveways

Tapered Drape Seals

Construction Polyfoam Core
Bondor foam dock seals are constructed
of the finest materials and assembled to
give you years of dependable service.
Insulating polyurethane foam conforms
to the shape of the truck to form a tight
weatherseal.
Mounting Board Galvanized Hardware
Our foam core is bonded to a kiln-dried
pressure treated 2" thick wood back-
board for an easy, long-lasting
installation.
All Bondor Foam Seals are provided
with appropriate galvanized mounting
brackets. Building fasteners not included.
Color
Permanent Guide Stripe

Standard colors are black with a yellow
guide stripe. Other colors available upon
request.

A 4" wide contrasting guide stripe is
sewn on.
Drape Curtain
Our weighted curtain is made the width
of the seal opening, and it covers the
face of the sidepads.
Rugged Vinyl Cover
Top quality abrasion resistant 22 oz. vinyl coated nylon fabric is used to cover our
standard seals. A 40 oz. nylon reinforced vinyl material is used on our heavy duty seals.
Vents
All vertical pads are provided with covered vents to allow air to escape during
compression of the seal, reducing the amount of stress on the vinyl fabric.
Grommets in bottom panels allow drainage of moisture.
Full Width Header
Header to consist of full width, weighted drape curtain with mounting backboard. Curtain
to be supported between side pads by galvanized pipe sewn into curtain.
Tapered Side Pads
Tapered side pads accommodate a pitched ramp approach to your building. The specific
taper is custom made to match the angle of your driveway.
3" wide x 9' - 4" long x 3/4" plywood backboard
Top View
Square side pad cross section shown above
Truck Bumpers Required

To order a series T-1DT Tapered Drape Seal:

Front View
Side View
1.

Determine (measure) your inclined driveway to establish the amount of driveway rise and your driveway length.
See sketch below.

"A" Note: In cases where the building wall is setback from the edge of the dock, the actual bumper projection required is less
the building setback. Example: The incline chart indicates a 12" bumper "A" dimension but the building wall is setback 3",
therefore the actual bumper necessary would be 9".

2. Determine the requried dock bumper size and dock seal side pad dimensions by using the incline chart below. This
chart is designed to leave the top of the truck approximately 6" from the building wall when the truck is fully docked.
a. Find your driveway rise in the left column and follow across the chart to a driveway length closest to your actual
measured length. Dimensions A,B & C are the recommended sizes of your dock bumpers and your dock seal taper.
Dimensions B & C will be used in the price tables below to order the actual correct dock seal model #.
b. Example: Driveway rise is 24", driveway length is 40'. At the intersection of these two rows in the chart, dimensions
A = 12, B = 16 and C = 10. This means that for this example you would have dock bumpers (or a dock projection)
of 12" with foam side pads which taper from 16" at the bottom to 10" at the top.
Driveway Length
10' 20' 30' 40' 50' 60' 70'
Rise"
A B C A B C A B C A B C A B C A B C A B C
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
9 14 12
10.5 16 12
12 16 10
14 18 10
16 20 10
17 22 12
19 23 10
21 25 10
23 27 10
25 29 10
27 31 10
29 33 10
31 35 10
33 37 10
35 39 10
36 40 10
38 42 10
40 44 10
42 46 10
44 48 10
46 50 10
48 52 10
50 54 10
52 56 10
54 58 10
55 59 10
9 14 14
9 14 12
9 14 12
10.5 16 12
12 16 12
12 16 10
12 16 10
14 18 10
15 20 12
16 20 10
16 20 10
17 22 12
18 22 10
19 23 10
20 24 10
21 25 10
22 26 10
23 27 10
24 28 10
25 29 10
26 30 10
27 31 10
28 32 10
29 33 10
30 34 10
31 35 10
9 14 14
9 14 14
9 14 12
9 14 12
10.5 16 14
10.5 16 12
10.5 16 12
12 16 12
12 16 10
12 16 10
13 18 12
14 18 10
14 18 10
15 20 12
16 20 10
16 20 10
17 22 12
17 22 12
18 22 10
19 23 10
19 23 10
20 24 10
21 25 10
21 25 10
22 26 10
22 26 10
9 14 14
9 14 14
9 14 14
9 14 12
9 14 12
9 14 12
9 14 12
10.5 16 12
10.5 16 12
10.5 16 12
12 16 12
12 16 10
12 16 10
12 16 10
13 18 12
14 18 10
14 18 10
15 20 12
15 20 12
16 20 10
16 20 10
16 20 10
17 22 12
17 22 12
18 22 10
18 22 10
9 14 14
9 14 14
9 14 14
9 14 12
9 14 12
9 14 12
9 14 12
9 14 12
9 14 12
10.5 16 12
10.5 16 12
10.5 16 12
12 16 12
12 16 12
12 16 10
12 16 10
12 16 10
13 18 12
13 18 12
14 18 10
14 18 10
14 18 10
15 20 12
15 20 12
16 20 10
16 20 10
9 14 14
9 14 14
9 14 14
9 14 14
9 14 12
9 14 12
9 14 12
9 14 12
9 14 12
9 14 12
9 14 12
10.5 16 12
10.5 16 12
10.5 16 12
10.5 16 12
12 16 12
12 16 12
12 16 10
12 16 10
12 16 10
12 16 10
13 18 12
13 18 11
14 18 10
14 18 10
14 18 10
9 14 14
9 14 14
9 14 14
9 14 14
9 14 14
9 14 12
9 14 12
9 14 12
9 14 12
9 14 12
9 14 12
9 14 12
9 14 10
10.5 16 12
10.5 16 12
10.5 16 12
10.5 16 12
12 16 12
12 16 12
12 16 12
12 16 10
12 16 10
12 16 10
12 16 10
13 18 12
13 18 12
Special Order Products - Contact Us
Use Standard T-1D (Drape Seal)
3. Select the desired model # from the price charts below by finding your B and C dimensions determined above and
the door height range for your door opening such as: using the dimensions determined above (B dim. of 16 and
C dim. of 10) for a door with a height of 12' and a width of 8' the model # for the standard seal is
T-1DT/P16/SQ-12/T1610/8WX12H.
4. Add desired special options from below.
5. Remember to order 2 dock bumpers per seal from our bumpers section if they are not existing.
6. We invite you to let our engineers review your dock seal application. Complete the truck dock dimension sheet
on our contact page and we will confirm your dock seal selection.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Model No. of the item you wish to purchase.


Table A: T-1DT Series Pricing - Use tables B & C (shown below) for optional wear pleats
Bottom
Side Pad
Projection
(Inches)
B
Top Side Pad
Projection
(Inches)
C
Door Opening
Height Range
up to and
Including
(Feet)
Side
Pad
Height
(Feet)
Drape
Curtain
Drop from
Top of
Side Pad
(In.)
Recommended
Dock Bumper
T-1DT Tapered Drape Dock
Seal - add door width x door
height to base Model # below
Price
14 12 10 10 24 9"-#B910-14 T-1DT/P14/SQ-12/T1412/--W X --H
$1,163
14 12 11 11 36 9"-#B910-14 T-1DT/P14/SQ-12/T1412/--W X --H
$1,255
14 12 12 12 48 9"-#B910-14 T-1DT/P14/SQ-12/T1412/--W X --H
$1,346
14 10 10 10 24 9"-#B910-14 T-1DT/P14/SQ-12/T1410/--W X --H
$1,163
14 10 11 11 36 9"-#B910-14 T-1DT/P14/SQ-12/T1410/--W X --H
$1,255
14 10 12 12 48 9"-#B910-14 T-1DT/P14/SQ-12/T1410/--W X --H
$1,346
16 14 10 10 24 10 1/2"-#B10510-14 T-1DT/P16/SQ-12/T1614/--W X --H
$1,273
16 14 11 11 36 10 1/2"-#B10510-14 T-1DT/P16/SQ-12/T1614/--W X --H
$1,363
16 14 12 12 48 10 1/2"-#B10510-14 T-1DT/P16/SQ-12/T1614/--W X --H
$1,456
16 12 10 10 24 10 1/2"-#B10510-14 T-1DT/P16/SQ-12/T1612/--W X --H
$1,273
16 12 11 11 36 10 1/2"-#B10510-14 T-1DT/P16/SQ-12/T1612/--W X --H
$1,363
16 12 12 12 48 10 1/2"-#B10510-14 T-1DT/P16/SQ-12/T1612/--W X --H
$1,456
16 10 10 10 24 10 1/2"-#B10510-14 T-1DT/P16/SQ-12/T1610/--W X --H
$1,273
16 10 11 11 36 10 1/2"-#B10510-14 T-1DT/P16/SQ-12/T1610/--W X --H
$1,363
16 10 12 12 48 10 1/2"-#B10510-14 T-1DT/P16/SQ-12/T1610/--W X --H
$1,456
B Dim. C Dim. Door
Height
Pad Height Drape
Drop
Bumper Model #
Price
18 16 10 10 24 12"-#B1210-14 T-1DT/P18/SQ-12/T1816/--W X --H
$1,381
18 16 11 11 36 12"-#B1210-14 T-1DT/P18/SQ-12/T1816/--W X --H
$1,472
18 16 12 12 48 12"-#B1210-14 T-1DT/P18/SQ-12/T1816/--W X --H
$1,566
18 14 10 10 24 12"-#B1210-14 T-1DT/P18/SQ-12/T1814/--W X --H
$1,381
18 14 11 11 36 12"-#B1210-14 T-1DT/P18/SQ-12/T1814/--W X --H
$1,472
18 14 12 12 48 12"-#B1210-14 T-1DT/P18/SQ-12/T1814/--W X --H
$1,566
18 12 10 10 24 12"-#B1210-14 T-1DT/P18/SQ-12/T1812/--W X --H
$1,381
18 12 11 11 36 12"-#B1210-14 T-1DT/P18/SQ-12/T1812/--W X --H
$1,472
18 12 12 12 48 12"-#B1210-14 T-1DT/P18/SQ-12/T1812/--W X --H
$1,566
18 10 10 10 24 12"-#B1210-14 T-1DT/P18/SQ-12/T1810/--W X --H
$1,381
18 10 11 11 36 12"-#B1210-14 T-1DT/P18/SQ-12/T1810/--W X --H
$1,472
18 10 12 12 48 12"-#B1210-14 T-1DT/P18/SQ-12/T1810/--W X --H
$1,566
B Dim. C Dim. Door
Height
Pad Height Drape
Drop
Bumper Model #
Price
20 18 10 10 24 14"-contact us T-1DT/P20/SQ-12/T2018/--W X --H
$1,490
20 18 11 11 36 14"-contact us T-1DT/P20/SQ-12/T2018/--W X --H
$1,584
20 18 12 12 48 14"-contact us T-1DT/P20/SQ-12/T2018/--W X --H
$1,674
20 16 10 10 24 14"-contact us T-1DT/P20/SQ-12/T2016/--W X --H
$1,490
20 16 11 11 36 14"-contact us T-1DT/P20/SQ-12/T2016/--W X --H
$1,584
20 16 12 12 48 14"-contact us T-1DT/P20/SQ-12/T2016/--W X --H
$1,674
20 14 10 10 24 14"-contact us T-1DT/P20/SQ-12/T2014/--W X --H
$1,490
20 14 11 11 36 14"-contact us T-1DT/P20/SQ-12/T2014/--W X --H
$1,584
20 14 12 12 48 14"-contact us T-1DT/P20/SQ-12/T2014/--W X --H
$1,674
20 12 10 10 24 14"-contact us T-1DT/P20/SQ-12/T2012/--W X --H
$1,490
20 12 11 11 36 14"-contact us T-1DT/P20/SQ-12/T2012/--W X --H
$1,584
20 12 12 12 48 14"-contact us T-1DT/P20/SQ-12/T2012/--W X --H
$1,674
20 10 10 10 24 14"-contact us T-1DT/P20/SQ-12/T2010/--W X --H
$1,490
20 10 11 11 36 14"-contact us T-1DT/P20/SQ-12/T2010/--W X --H
$1,584
20 10 12 12 48 14"-contact us T-1DT/P20/SQ-12/T2010/--W X --H
$1,674
B Dim. C Dim. Door
Height
Pad Height Drape
Drop
Bumper Model #
Price
22 20 10 10 24 16"-contact us T-1DT/P22/SQ-12/T2220/--W X --H
$1,600
22 20 11 11 36 16"-contact us T-1DT/P22/SQ-12/T2220/--W X --H
$1,692
22 20 12 12 48 16"-contact us T-1DT/P22/SQ-12/T2220/--W X --H
$1,784
22 18 10 10 24 16"-contact us T-1DT/P22/SQ-12/T2218/--W X --H
$1,600
22 18 11 11 36 16"-contact us T-1DT/P22/SQ-12/T2218/--W X --H
$1,692
22 18 12 12 48 16"-contact us T-1DT/P22/SQ-12/T2218/--W X --H
$1,784
22 16 10 10 24 16"-contact us T-1DT/P22/SQ-12/T2216/--W X --H
$1,600
22 16 11 11 36 16"-contact us T-1DT/P22/SQ-12/T2216/--W X --H
$1,692
22 16 12 12 48 16"-contact us T-1DT/P22/SQ-12/T2216/--W X --H
$1,784
22 14 10 10 24 16"-contact us T-1DT/P22/SQ-12/T2214/--W X --H
$1,600
22 14 11 11 36 16"-contact us T-1DT/P22/SQ-12/T2214/--W X --H
$1,692
22 14 12 12 48 16"-contact us T-1DT/P22/SQ-12/T2214/--W X --H
$1,784
22 12 10 10 24 16"-contact us T-1DT/P22/SQ-12/T2212/--W X --H
$1,600
22 12 11 11 36 16"-contact us T-1DT/P22/SQ-12/T2212/--W X --H
$1,692
22 12 12 12 48 16"-contact us T-1DT/P22/SQ-12/T2212/--W X --H
$1,784
22 10 10 10 24 16"-contact us T-1DT/P22/SQ-12/T2210/--W X --H
$1,600
22 10 11 11 36 16"-contact us T-1DT/P22/SQ-12/T2210/--W X --H
$1,692
22 10 12 12 48 16"-contact us T-1DT/P22/SQ-12/T2210/--W X --H
$1,784

Optional Wear Pleats/Surfaces (use charts below)
40 oz. wear pleat surfaces for the
full length of the side pads provide
maximum wear and abrasion
resistance. Available in 4" or 8"
exposure.
NOTE:  Each seal ordered with
wear pleats includes pleats on
drape curtain.
8" pleat exposure shown
8" pleat exposure
shown here
4" pleat exposure
shown here

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Model No. of the item you wish to purchase.


Table B: T-1DT Series Pricing with Optional Wear Pleat Surface - 8" exposure
Bottom
Side Pad
Projection
(Inches)
B
Top Side
Pad
Projection
(Inches)
C
Door
Opening
Height
Range
up to and
Including
(Feet)
Side
Pad
Height
(Feet)
Drape
Curtain
Drop from
Top of
Side Pad
(Inches)
Recommended
Dock Bumper
T-1DT Tapered Drape Dock
Seal - add door width x door
height to base Model # below
Price
14 12 10 10 24 9"-#B910-14 T-1DT/P14/SQ-12/T1412/WP8/--W X --H
$1,519
14 12 11 11 36 9"-#B910-14 T-1DT/P14/SQ-12/T1412/WP8/--W X --H
$1,645
14 12 12 12 48 9"-#B910-14 T-1DT/P14/SQ-12/T1412/WP8/--W X --H
$1,773
14 10 10 10 24 9"-#B910-14 T-1DT/P14/SQ-12/T1410/WP8/--W X --H
$1,519
14 10 11 11 36 9"-#B910-14 T-1DT/P14/SQ-12/T1410/WP8/--W X --H
$1,645
14 10 12 12 48 9"-#B910-14 T-1DT/P14/SQ-12/T1410/WP8/--W X --H
$1,773
16 14 10 10 24 10 1/2"-#B10510-14 T-1DT/P16/SQ-12/T1614/WP8/--W X --H
$1,627
16 14 11 11 36 10 1/2"-#B10510-14 T-1DT/P16/SQ-12/T1614/WP8/--W X --H
$1,757
16 14 12 12 48 10 1/2"-#B10510-14 T-1DT/P16/SQ-12/T1614/WP8/--W X --H
$1,883
16 12 10 10 24 10 1/2"-#B10510-14 T-1DT/P16/SQ-12/T1612/WP8/--W X --H
$1,627
16 12 11 11 36 10 1/2"-#B10510-14 T-1DT/P16/SQ-12/T1612/WP8/--W X --H
$1,757
16 12 12 12 48 10 1/2"-#B10510-14 T-1DT/P16/SQ-12/T1612/WP8/--W X --H
$1,883
16 10 10 10 24 10 1/2"-#B10510-14 T-1DT/P16/SQ-12/T1610/WP8/--W X --H
$1,627
16 10 11 11 36 10 1/2"-#B10510-14 T-1DT/P16/SQ-12/T1610/WP8/--W X --H
$1,757
16 10 12 12 48 10 1/2"-#B10510-14 T-1DT/P16/SQ-12/T1610/WP8/--W X --H
$1,883
B Dim. C Dim. Door Height Pad Height Drape
Drop
Bumper Model #
Price
18 16 10 10 24 12"-#B1210-14 T-1DT/P18/SQ-12/T1816/WP8/--W X --H
$1,737
18 16 11 11 36 12"-#B1210-14 T-1DT/P18/SQ-12/T1816/WP8/--W X --H
$1,867
18 16 12 12 48 12"-#B1210-14 T-1DT/P18/SQ-12/T1816/WP8/--W X --H
$1,991
18 14 10 10 24 12"-#B1210-14 T-1DT/P18/SQ-12/T1814/WP8/--W X --H
$1,737
18 14 11 11 36 12"-#B1210-14 T-1DT/P18/SQ-12/T1814/WP8/--W X --H
$1,867
18 14 12 12 48 12"-#B1210-14 T-1DT/P18/SQ-12/T1814/WP8/--W X --H
$1,991
18 12 10 10 24 12"-#B1210-14 T-1DT/P18/SQ-12/T1812/WP8/--W X --H
$1,737
18 12 11 11 36 12"-#B1210-14 T-1DT/P18/SQ-12/T1812/WP8/--W X --H
$1,867
18 12 12 12 48 12"-#B1210-14 T-1DT/P18/SQ-12/T1812/WP8/--W X --H
$1,991
18 10 10 10 24 12"-#B1210-14 T-1DT/P18/SQ-12/T1810/WP8/--W X --H
$1,737
18 10 11 11 36 12"-#B1210-14 T-1DT/P18/SQ-12/T1810/WP8/--W X --H
$1,867
18 10 12 12 48 12"-#B1210-14 T-1DT/P18/SQ-12/T1810/WP8/--W X --H
$1,991
B Dim. C Dim. Door Height Pad Height Drape Drop Bumper Model #
Price
20 18 10 10 24 14"-contact us T-1DT/P20/SQ-12/T2018/WP8/--W X --H
$1,845
20 18 11 11 36 14"-contact us T-1DT/P20/SQ-12/T2018/WP8/--W X --H
$1,975
20 18 12 12 48 14"-contact us T-1DT/P20/SQ-12/T2018/WP8/--W X --H
$2,102
20 16 10 10 24 14"-contact us T-1DT/P20/SQ-12/T2016/WP8/--W X --H
$1,845
20 16 11 11 36 14"-contact us T-1DT/P20/SQ-12/T2016/WP8/--W X --H
$1,975
20 16 12 12 48 14"-contact us T-1DT/P20/SQ-12/T2016/WP8/--W X --H
$2,102
20 14 10 10 24 14"-contact us T-1DT/P20/SQ-12/T2014/WP8/--W X --H
$1,845
20 14 11 11 36 14"-contact us T-1DT/P20/SQ-12/T2014/WP8/--W X --H
$1,975
20 14 12 12 48 14"-contact us T-1DT/P20/SQ-12/T2014/WP8/--W X --H
$2,102
20 12 10 10 24 14"-contact us T-1DT/P20/SQ-12/T2012/WP8/--W X --H
$1,845
20 12 11 11 36 14"-contact us T-1DT/P20/SQ-12/T2012/WP8/--W X --H
$1,975
20 12 12 12 48 14"-contact us T-1DT/P20/SQ-12/T2012/WP8/--W X --H
$2,102
20 10 10 10 24 14"-contact us T-1DT/P20/SQ-12/T2010/WP8/--W X --H
$1,845
20 10 11 11 36 14"-contact us T-1DT/P20/SQ-12/T2010/WP8/--W X --H
$1,975
20 10 12 12 48 14"-contact us T-1DT/P20/SQ-12/T2010/WP8/--W X --H
$2,102
B Dim. C Dim. Door Height Pad Height Drape Drop Bumper Model #
Price
22 20 10 10 24 16"-contact us T-1DT/P22/SQ-12/T2220/WP8/--W X --H
$1,955
22 20 11 11 36 16"-contact us T-1DT/P22/SQ-12/T2220/WP8/--W X --H
$2,084
22 20 12 12 48 16"-contact us T-1DT/P22/SQ-12/T2220/WP8/--W X --H
$2,212
22 18 10 10 24 16"-contact us T-1DT/P22/SQ-12/T2218/WP8/--W X --H
$1,955
22 18 11 11 36 16"-contact us T-1DT/P22/SQ-12/T2218/WP8/--W X --H
$2,084
22 18 12 12 48 16"-contact us T-1DT/P22/SQ-12/T2218/WP8/--W X --H
$2,212
22 16 10 10 24 16"-contact us T-1DT/P22/SQ-12/T2216/WP8/--W X --H
$1,955
22 16 11 11 36 16"-contact us T-1DT/P22/SQ-12/T2216/WP8/--W X --H
$2,084
22 16 12 12 48 16"-contact us T-1DT/P22/SQ-12/T2216/WP8/--W X --H
$2,212
22 14 10 10 24 16"-contact us T-1DT/P22/SQ-12/T2214/WP8/--W X --H
$1,955
22 14 11 11 36 16"-contact us T-1DT/P22/SQ-12/T2214/WP8/--W X --H
$2,084
22 14 12 12 48 16"-contact us T-1DT/P22/SQ-12/T2214/WP8/--W X --H
$2,212
22 12 10 10 24 16"-contact us T-1DT/P22/SQ-12/T2212/WP8/--W X --H
$1,955
22 12 11 11 36 16"-contact us T-1DT/P22/SQ-12/T2212/WP8/--W X --H
$2,084
22 12 12 12 48 16"-contact us T-1DT/P22/SQ-12/T2212/WP8/--W X --H
$2,212
22 10 10 10 24 16"-contact us T-1DT/P22/SQ-12/T2210/WP8/--W X --H
$1,955
22 10 11 11 36 16"-contact us T-1DT/P22/SQ-12/T2210/WP8/--W X --H
$2,084
22 10 12 12 48 16"-contact us T-1DT/P22/SQ-12/T2210/WP8/--W X --H
$2,212

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Model No. of the item you wish to purchase.


Table C: T-1DT Series Pricing with Optional Wear Pleat Surface - 4" exposure
Bottom
Side Pad
Projection
(Inches)
B
Top Side
Pad
Projection
(Inches)
C

Door
Opening
Height
Range up
to and
Including
(Feet)

Side
Pad
Height
(Feet)
Drape
Curtain
Drop
from Top
of Side
Pad
(Inches)
Recommended
Dock Bumper
T-1DT Tapered Drape Dock Seal -
add door width x door height to
base Model # below
Price
14 12 10 10 24 9"-#B910-14 T-1DT/P14/SQ-12/T1412/WP4/--W X --H
$1,708
14 12 11 11 36 9"-#B910-14 T-1DT/P14/SQ-12/T1412/WP4/--W X --H
$1,856
14 12 12 12 48 9"-#B910-14 T-1DT/P14/SQ-12/T1412/WP4/--W X --H
$2,002
14 10 10 10 24 9"-#B910-14 T-1DT/P14/SQ-12/T1410/WP4/--W X --H
$1,708
14 10 11 11 36 9"-#B910-14 T-1DT/P14/SQ-12/T1410/WP4/--W X --H
$1,856
14 10 12 12 48 9"-#B910-14 T-1DT/P14/SQ-12/T1410/WP4/--W X --H
$2,002
16 14 10 10 24 10 1/2"-#B10510-14 T-1DT/P16/SQ-12/T1614/WP4/--W X --H
$1,818
16 14 11 11 36 10 1/2"-#B10510-14 T-1DT/P16/SQ-12/T1614/WP4/--W X --H
$1,966
16 14 12 12 48 10 1/2"-#B10510-14 T-1DT/P16/SQ-12/T1614/WP4/--W X --H
$2,113
16 12 10 10 24 10 1/2"-#B10510-14 T-1DT/P16/SQ-12/T1612/WP4/--W X --H
$1,818
16 12 11 11 36 10 1/2"-#B10510-14 T-1DT/P16/SQ-12/T1612/WP4/--W X --H
$1,966
16 12 12 12 48 10 1/2"-#B10510-14 T-1DT/P16/SQ-12/T1612/WP4/--W X --H
$2,113
16 10 10 10 24 10 1/2"-#B10510-14 T-1DT/P16/SQ-12/T1610/WP4/--W X --H
$1,818
16 10 11 11 36 10 1/2"-#B10510-14 T-1DT/P16/SQ-12/T1610/WP4/--W X --H
$1,966
16 10 12 12 48 10 1/2"-#B10510-14 T-1DT/P16/SQ-12/T1610/WP4/--W X --H
$2,113
B Dim. C Dim. Door Height Pad Height Drape Drop Bumper Model #
Price
18 16 10 10 24 12"-#B1210-14 T-1DT/P18/SQ-12/T1816/WP4/--W X --H
$1,926
18 16 11 11 36 12"-#B1210-14 T-1DT/P18/SQ-12/T1816/WP4/--W X --H
$2,074
18 16 12 12 48 12"-#B1210-14 T-1DT/P18/SQ-12/T1816/WP4/--W X --H
$2,221
18 14 10 10 24 12"-#B1210-14 T-1DT/P18/SQ-12/T1814/WP4/--W X --H
$1,926
18 14 11 11 36 12"-#B1210-14 T-1DT/P18/SQ-12/T1814/WP4/--W X --H
$2,074
18 14 12 12 48 12"-#B1210-14 T-1DT/P18/SQ-12/T1814/WP4/--W X --H
$2,221
18 12 10 10 24 12"-#B1210-14 T-1DT/P18/SQ-12/T1812/WP4/--W X --H
$1,926
18 12 11 11 36 12"-#B1210-14 T-1DT/P18/SQ-12/T1812/WP4/--W X --H
$2,074
18 12 12 12 48 12"-#B1210-14 T-1DT/P18/SQ-12/T1812/WP4/--W X --H
$2,221
18 10 10 10 24 12"-#B1210-14 T-1DT/P18/SQ-12/T1810/WP4/--W X --H
$1,926
18 10 11 11 36 12"-#B1210-14 T-1DT/P18/SQ-12/T1810/WP4/--W X --H
$2,074
18 10 12 12 48 12"-#B1210-14 T-1DT/P18/SQ-12/T1810/WP4/--W X --H
$2,221
B Dim. C Dim. Door Height Pad Height Drape Drop Bumper Model #
Price
20 18 10 10 24 14"-contact us T-1DT/P20/SQ-12/T2018/WP4/--W X --H
$2,038
20 18 11 11 36 14"-contact us T-1DT/P20/SQ-12/T2018/WP4/--W X --H
$2,183
20 18 12 12 48 14"-contact us T-1DT/P20/SQ-12/T2018/WP4/--W X --H
$2,331
20 16 10 10 24 14"-contact us T-1DT/P20/SQ-12/T2016/WP4/--W X --H
$2,038
20 16 11 11 36 14"-contact us T-1DT/P20/SQ-12/T2016/WP4/--W X --H
$2,183
20 16 12 12 48 14"-contact us T-1DT/P20/SQ-12/T2016/WP4/--W X --H
$2,331
20 14 10 10 24 14"-contact us T-1DT/P20/SQ-12/T2014/WP4/--W X --H
$2,038
20 14 11 11 36 14"-contact us T-1DT/P20/SQ-12/T2014/WP4/--W X --H
$2,183
20 14 12 12 48 14"-contact us T-1DT/P20/SQ-12/T2014/WP4/--W X --H
$2,331
20 12 10 10 24 14"-contact us T-1DT/P20/SQ-12/T2012/WP4/--W X --H
$2,038
20 12 11 11 36 14"-contact us T-1DT/P20/SQ-12/T2012/WP4/--W X --H
$2,183
20 12 12 12 48 14"-contact us T-1DT/P20/SQ-12/T2012/WP4/--W X --H
$2,331
20 10 10 10 24 14"-contact us T-1DT/P20/SQ-12/T2010/WP4/--W X --H
$2,038
20 10 11 11 36 14"-contact us T-1DT/P20/SQ-12/T2010/WP4/--W X --H
$2,183
20 10 12 12 48 14"-contact us T-1DT/P20/SQ-12/T2010/WP4/--W X --H
$2,331
B Dim. C Dim. Door Height Pad Height Drape Drop Bumper Model #
Price
22 20 10 10 24 16"-contact us T-1DT/P22/SQ-12/T2220/WP4/--W X --H
$2,147
22 20 11 11 36 16"-contact us T-1DT/P22/SQ-12/T2220/WP4/--W X --H
$2,291
22 20 12 12 48 16"-contact us T-1DT/P22/SQ-12/T2220/WP4/--W X --H
$2,439
22 18 10 10 24 16"-contact us T-1DT/P22/SQ-12/T2218/WP4/--W X --H
$2,147
22 18 11 11 36 16"-contact us T-1DT/P22/SQ-12/T2218/WP4/--W X --H
$2,291
22 18 12 12 48 16"-contact us T-1DT/P22/SQ-12/T2218/WP4/--W X --H
$2,439
22 16 10 10 24 16"-contact us T-1DT/P22/SQ-12/T2216/WP4/--W X --H
$2,147
22 16 11 11 36 16"-contact us T-1DT/P22/SQ-12/T2216/WP4/--W X --H
$2,291
22 16 12 12 48 16"-contact us T-1DT/P22/SQ-12/T2216/WP4/--W X --H
$2,439
22 14 10 10 24 16"-contact us T-1DT/P22/SQ-12/T2214/WP4/--W X --H
$2,147
22 14 11 11 36 16"-contact us T-1DT/P22/SQ-12/T2214/WP4/--W X --H
$2,291
22 14 12 12 48 16"-contact us T-1DT/P22/SQ-12/T2214/WP4/--W X --H
$2,439
22 12 10 10 24 16"-contact us T-1DT/P22/SQ-12/T2212/WP4/--W X --H
$2,147
22 12 11 11 36 16"-contact us T-1DT/P22/SQ-12/T2212/WP4/--W X --H
$2,291
22 12 12 12 48 16"-contact us T-1DT/P22/SQ-12/T2212/WP4/--W X --H
$2,439
22 10 10 10 24 16"-contact us T-1DT/P22/SQ-12/T2210/WP4/--W X --H
$2,147
22 10 11 11 36 16"-contact us T-1DT/P22/SQ-12/T2210/WP4/--W X --H
$2,291
22 10 12 12 48 16"-contact us T-1DT/P22/SQ-12/T2210/WP4/--W X --H
$2,439

ARCHITECTURAL SPECIFICATIONS - Model T-1DT Tapered Drape Foam Seal
Truck Dock Seals
Truck dock seals shall be Drape Type as manufactured by the Bondor Division of FS Industries, W. Greenwich, RI,
to fit a door opening of 8' wide x 12' high.
Construction

Pads to have a polyurethane foam core bonded to a 2" x 12" kiln dried wood backboard to give a finished projection
of ______________. Side pads to be 10' - 0" long (standard). Side pads to have 4" wide contrasting guide stripe sewn
on. Bottom of pads to have 3" upward taper to prevent pinching between truck and bumpers. Bottom of pads to be
closed with covered side vents to allow air during compression and to prevent condensation. Header to consist of
full width, weighted drape curtain with mounting strip. Curtain to be supported between side pads by galvanized pipe
sewn into curtain. Curtain to be provided with elastic shock cords to hold curtain in place.

Cover Material
Pads to be completely wrapped with 22 oz. vinyl coated nylon.
Bondor, Dock Door Loading Seal, Dock Door Seals, Foam Truck Dock Seals, Dock Seals, Loading Dock Door Seals, Loading
Dock Seals, Tapered Drape Seals, Wear Pleats from your source for material handling equipment.
Back to Product Category
Visa - MasterCard - AMEX
Home - Order - Search - Quote - Contact Us - About Us - My Account - Shopping Cart