 |
ENGINEERED
STEEL PRODUCTS |
| Priced
Full Line Products Catalog |
20
Technology Way • West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401)
421-5679 |
|
|
|
|
Back to Product Category
SERIES
JG PORTABLE MIXERS
|
GEAR
DRIVE MIXER, CLAMP OR CUP PLATE MOUNT
HEAVY HELICAL GEAR, 350 RPM, GREASE LUBE |
|
 |
 |
|
The
most powerful mixers for the most difficult
mixing applications. Grease filled gearbox
eliminates oil seal and the possibility of oil
contamination of process. |
|
|
|
Features |
|
•
No clutches to slip, wear or replace.
• 316SS propellers and shafts are standard.
Optional coatings such as rubber, PVC or
Teflon® also available.
• Square pitch 1.0 ratio marine propellers are
used exclusively. Flow coefficients and power
consumption characteristics equal those of the
best hydrofoil impeller designs.
• Vibration-absorbing pad standard.
• Motors are available in TEFC or explosion-
proof enclosures (1750 rpm, 56C frame). Air
motors also available.
• Gears run in grease lubrication. Cannot leak oil.
• All JG mixer shaft bearings are permanently
lubricated.
• Variable speed drives also available.
• Cast aluminum housing.
• Mounting clamp has adjustable angle of entry by
indexed ball-and-socket design to achieve
various process results.
• Fixed cup plate mount optional on 1/3 HP
through 1-1/2 HP. Standard on 2 HP and larger
models. |
Model
JG-3.0 |
Model
JG-3.4 |
|
|
|
|
|
|
|
|
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
PRICES |
Model
No. |
Motor
Description |
A |
B |
C |
D |
Wt.
(lbs) |
Prices |
Shaft
Length |
Single |
Dual |
Shaft
Dia. |
Single
Prop |
Dual
Prop |
Totally-Enclosed
Fan-Cooled (TEFC) |
JG-2.0 |
1/3
HP-1-115/230* |
48" |
17
5/8" |
10" |
8" |
3/4" |
65 |
|
|
JG-2.1 |
1/3
HP-3-230/460* |
48" |
17
3/8" |
10" |
8" |
3/4" |
65 |
|
|
JG-3.0 |
1/2
HP-1-115/230* |
48" |
18
1/2" |
12" |
10" |
3/4" |
70 |
|
|
JG-3.1 |
1/2
HP-3-230/460* |
48" |
17
5/8" |
12" |
10" |
3/4" |
70 |
|
|
JG-4.0 |
3/4
HP-1-115/230* |
60" |
18
3/4" |
13" |
11" |
3/4" |
80 |
|
|
JG-4.1 |
3/4
HP-3-230/460* |
60" |
18
1/8" |
13" |
11" |
3/4" |
80 |
|
|
JG-5.1 |
1 HP-3-230/460* |
60" |
18
3/8" |
14" |
12" |
1" |
90 |
|
|
JG-6.1 |
1 1/2
HP-3-230/460* |
60" |
18
3/4" |
15" |
13" |
1" |
90 |
|
|
JG-7.1† |
2 HP-3-230/460* |
60" |
20
5/8" |
16" |
14" |
1
1/4" |
95 |
|
|
JG-8.1† |
3 HP-3-230/460 |
72" |
21
5/8" |
16" |
15" |
1
1/4" |
115 |
|
|
Explosion-Proof
Class 1 Group D (EP) |
JG-2.2 |
1/3
HP-1-115/230 |
48" |
20
1/2" |
10" |
8" |
3/4" |
75 |
|
|
JG-2.3 |
1/3
HP-3-230/460 |
48" |
17
3/8" |
10" |
8" |
3/4" |
75 |
|
|
JG-3.2 |
1/2
HP-1-115/230 |
48" |
21" |
12" |
10" |
3/4" |
90 |
|
|
JG-3.3 |
1/2
HP-3-230/460 |
48" |
19
5/8" |
12" |
10" |
3/4" |
90 |
|
|
JG-4.2 |
3/4
HP-1-115/230 |
60" |
21
1/2" |
13" |
11" |
3/4" |
90 |
|
|
JG-4.3 |
3/4
HP-3-230/460 |
60" |
19
5/8" |
13" |
11" |
3/4" |
90 |
|
|
JG-5.3 |
1 HP-3-230/460 |
60" |
20
1/2" |
14" |
12" |
1" |
100 |
|
|
JG-6.3 |
1 1/2
HP-3-230/460 |
60" |
20
1/2" |
15" |
13" |
1" |
100 |
|
|
JG-7.3† |
2 HP-3-230/460 |
60" |
22
1/8" |
16" |
14" |
1
1/4" |
105 |
|
|
§
Air Motor |
JG-3.4§ |
1/3
HP to 1/2 HP AIR
Air Requirements: 12-20CFM
at 40-80PSI |
48" |
17
1/8" |
12" |
10" |
3/4" |
65 |
|
|
JG-4.4§ |
3/4
HP AIR
Air Requirements: 30CFM at 60PSI |
60" |
18" |
13" |
11" |
3/4" |
70 |
|
|
JG-5.4§ |
1 HP
AIR
Air Requirements: 40CFM at 40PSI |
60" |
19
1/8" |
14" |
12" |
1" |
70 |
|
|
JG-6.4 |
1 1/2
HP AIR
Air Requirements: 55CFM at 60PSI |
60" |
19
1/8" |
15" |
13" |
1" |
75 |
|
|
JG-7.4† |
2 HP
AIR
Air Requirements: 65CFM at 70PSI |
60" |
15
5/8" |
16" |
14" |
1
1/4" |
80 |
|
|
JG-8.4† |
4 HP
AIR
Air Requirements: 125CFM at 90PSI |
72" |
16
3/4" |
16" |
15" |
1
1/4" |
80 |
|
|
|
*
Mill and Chemical Duty Motor available (Prices on request).
§ Requires Air Set
† Cup Plate Mount Only. |
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
*
Mill and Chemical Duty Motor available (Prices on request).
§ Requires Air Set
† Cup Plate Mount Only. |
|
|
|
|
|
|
|
ACCESSORIES
AND OPTIONS |
|
|
|
|
|
|
| STABILIZER
RINGS: Price addition for stabilizer rings. |
|
NON
STANDARD SHAFT LENGTHS - No
charge to furnish custom shafts shorter than the
standard length. Longer shafts are priced as follows: |
|
|
|
|
Prop
Dia. |
Price
Addition (316SS) |
Up
to 6"
| |
Up
to 9"
| |
Up
to 14
| |
Up
to 17"
| |
|
|
|
|
|
|
|
|
|
Shaft
Dia. |
Maximum
Length |
Any
Length From Standard to 72" |
Any
Length From 72" to Maximum |
5/8" |
48" |
N/A |
N/A |
3/4" |
60" |
|
N/A |
1" |
72" |
|
N/A |
1 1/4" |
84" |
|
|
|
|
|
|
|
AIR
SETS, including regulator, filter and lubricator are
available for air powered mixers as follows: |
|
|
|
|
|
|
Air
Set For 1/4 through 3/4 HP Air Motors
P/N 100803 $718.80 |
|
|
|
|
|
|
|
|
Air
Set For 1 HP and Larger Air Motors
P/N 100804 $940.80 |
|
|
|
|
Mixer Selection |
|
|
|
|
|
|
|
These
mixers have been designed, engineered
and built to provide long life and trouble-free
service in a wide variety of blending/mixing
operations. These mixers are popularly used to: |
final
product, and other parameters. Our
portables are available at either 350 or 420
RPM (gear-driven) or 1750 RPM (direct-
drive). If you have any questions or wish
to discuss your mixing/blending application
with us, please feel free to call one of our
sales engineers. |
|
 |
|
|
1.
Blend liquids.
2. Suspend or dissolve solids
3. Disperse immiscible liquids
4. Disperse small amounts of gases in
liquids |
|
|
|
|
|
|
|
Selection
Chart |
|
|
|
|
|
|
|
|
|
|
|
The chart below is intended to provide some
basic guidelines for selecting the proper
mixer(s) to provide mild blending of various
viscosity liquids in different size tanks. This
chart is based on an approximate mix/blend
time for two liquids of 30 minutes, with both
liquids already in the tank. Mixing times will
be shortened if one liquid is added to a
second liquid while the mixer is operating.
Powders should always be added while the
mixer is running. This chart also applies to the
suspension of solids with settling velocities of
less than one foot per minute. For more rapid
or vigorous mixing, use a mixer one or two
sizes larger. Dual propellers are recommended
for tanks 1000 gallons and larger at viscosity's
of 1000 CPS and higher. |
|
These
portable mixers can be clamp- or base-
mounted on beams, tank walls or other
supports. Angle of entry may be adjusted to
meet specific mixing requirements. These
portable mixers find use in a variety of dif-
ferent industrial applications…waste treat-
ment, water treatment and batch chemical
preparation. These portables are also ideal
for mixing paints, varnishes, polymers, textile
sizes and dyes, pharmaceuticals, soaps and
countless other materials from 1 to over
25,000 CPS viscosity. In the following pages,
we present specifications, dimensions and
dimensional drawings and other information
to help you select the proper mixer for your
application, depending on the size of the
batch, the size of the batch, components and |
|
|
|
|
|
|
|
|
|
|
Viscosity
CPS |
Up
to 50 Gallons
| Up
to 100 Gallons
| Up
to 200 Gallons
| Up
to 500 Gallons
| Up
to 1000 Gallons |
Up
to 2000 Gallons |
Up
to 3000 Gallons |
Up
to 5000 Gallons |
<1 |
BN-3.0 |
BN-3.0 |
JD-2.0 |
JD-2.0 |
JG-2.0 |
JG-2.0 |
JG-2.0 |
JG-4.0 |
<100 |
BN-3.0 |
BN-3.0 |
JD-2.0 |
JG-2.0 |
JG-2.0 |
JG-2.0 |
JG-3.0 |
JG-5.0 |
<300 |
BN-3.0 |
BN-3.0 |
JG-2.0 |
JG-2.0 |
JG-2.0 |
JG-4.0 |
JG-5.0 |
JG-5.0 |
<500 |
BN-3.0 |
JG-2.0 |
JG-2.0 |
JG-2.0 |
JG-3.0 |
JG-5.0 |
JG-6.0 |
JG-7.0 |
<1000
| JD-2.0 |
JG-2.0 |
JG-2.0 |
JG-2.0 |
JG-4.0 |
JG-6.0 |
JG-7.0 |
JG-8.0 |
<2000
| JG-2.0 |
JG-2.0 |
JG-3.0 |
JG-3.0 |
JG-5.0 |
JG-6.0 |
JG-8.0 |
JG-9.0 |
<3000
| JG-2.0 |
JG-2.0 |
JG-4.0 |
JG-4.0 |
JG-6.0 |
JG-8.0 |
JG-9.0 |
|
<5000
| JG-2.0 |
JG-2.0 |
JG-5.0 |
JG-5.0 |
JG-7.0 |
JG-8.0 |
|
|
<15000
| JG-3.0 |
JG-3.0 |
JG-5.0 |
JG-8.0 |
JG-9.0 |
JG-9.0 |
|
|
<25000
| JG-6.0 |
JG-7.0 |
JG-8.0 |
JG-9.0 |
|
|
|
|
|
|
Proper Mixer
Mounting and Positioning |
|
|
|
|
|
|
|
In
most applications involving small
mixing tanks of 1000 gallons or less, the
mixer is clamped to the side of the tank.
Optimum mixing will be achieved when
the mixer is angled from the tank wall,
either off center (figure 1) or on center
(figure 2). Improperly mounting a portable
mixer will greatly lessen mixing
efficiency, cause vibration and could
possibly damage the mixer.
Angling off center is preferred when
good material turnover is required, as in
mixing a slurry. Angling on center is desired
for more gentle mixing and when
vortexing must be minimized.
Larger size tanks may require that a
mixer be mounted directly in the center of
the tank with the shaft vertical (figure 3).
When a mixer is used in this arrangement,
baffles are recommended to prevent the
contents of the tank from turning in the
direction of the mix. If this occurs, mixing
action will be poor.
Such baffling will avoid vortexing and
allow mixing to be as thorough as possible.
These suggests that four baffles
be used, located 90° apart and sized
approximately 1/12 of the tank diameter.
The baffle should not fully extend to the
bottom of the tank and a gap should be
provided between the baffle and the
tank wall. |
|
|
 |
|
|
|
FIGURE
1 - Angling the portable mixer off center
is the position recommended for rapid turnover
of tank contents and good bottom washing. |
|
|
|
|
|
|
|
|
 |
|
|
|
FIGURE
2 - On center angling will produce good
mixing with minimum vortexing. Tank contents
turn over thoroughly but gently. |
|
|
|
|
|
|
|
|
 |
|
|
|
FIGURE
3 - For mixing in larger tanks, the mixer
is often placed vertically on center. In this con-
figuration, baffles are recommended to prevent
the contents of the tank from rotating, avoid
vortexing and achieve good mixing and top-to-
bottom turnover. |
|
|
|
|
Gear Driven Mixers, Mixers
and Agitators, Bung Mount, Drum Mixers, Drum Agitators, Collapsible Propellers
allow for
easy installation, Air, Electric, Variable-Speed, Explosion Proof Motors,
for use with closed top 55-gallon drums with 2" NPT
Bung, and C-Clamp Mount from your source for material handling equipment. |
Back
to Product Category |
 |
|
