ENGINEERED STEEL PRODUCTS

Priced Full Line Products Catalog

20 Technology Way • West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401) 421-5679

Rolled Section Clamps

	CG Girder Turning Clamps

	Working Load Limit: 250 to 13,200 lbs

			CG Clamps can lift and turn girders through 90º and are designed to meet the requirements of the heavy steel industry. They are general purpose clamps and can be used on rolled steel joists, beams, and fabrications up to a surface hardness of 300 Brinell (32HRc).

			Features:

			• Can be used on beams, fabrications, channels and rolled steel joists • Can lift and turn beams up to 90º and are designed to land the beam in either the vertical or horizontal position. • Fitted with a cam/spring-operated safety lock • Incorporates a positive lock onto one of the uppermost edges, which will allow the beam to be set down with the flange vertical • For long girders, fabrications and welded structures, two clamps and a lifting beam may be required


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click the Model No. of the item you wish to purchase.

CG Heavy Duty Girder Turning Clamp Prices


Type TTR Girder Clamps
Type TTR Girder Clamps			Back to Previous

	The TTR clamps can be used on girders and rolled steel joists up to a surface hardness of 300 Brinell (32HRc). This range of clamps has been developed for handling structural beams with the flange in a vertical position, or "H" position. Girders can be lifted and stacked horizontally. The hook rings are designed to be as a near to the center of gravity as possible, resulting in a near horizontal lift. For short beams a single clamp can be used. For longer beams, two clamps should be used in combination with a lifting beam. Various sizes and lifting capacities are available. The TTR is a versatile tool for transporting girders and joists. This clamp is fitted with a cam operated locking mechanism.

		Features:

		• Used to lift and transport structural beams up to a surface hardness of 300 Brinell (32HRc) with the flanges in the up right position • Available in capacities up to 3 tons • Jaw capacities available up to maximum of 1-1/8" • Short beams may be lifted with a single clamp, longer beams should use 2 clamps and a spreader beam • Repair centers available to service your products • Replacement parts available for clamps • No special tools required for repairs


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click the Model No. of the item you wish to purchase.

TTR Girder Clamp Prices

*Note: Not stocked.