 |
ENGINEERED
STEEL PRODUCTS |
| Priced
Full Line Products Catalog |
20
Technology Way • West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401)
421-5679 |
|
|
|
|
Back
to Product Category
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Model No. of the item you wish
to purchase. |
|
|
|
|
|
|
|
|
|
New
plastic bench seating. Can be mounted to
patio or choose a concrete base. Can be used
indoors or outdoors. Flexible, durable, and UV
stable. |
 |
|
|
|
|
Size: 37" x 17" x 18" H
Weight: 35 Lbs.
Material: Plastic
Anchoring: 2 Mounting brackets
Options: Concrete plug
Features: Flexible
Durable
UV
Stable |
|
|
|
|
|
|
Model: 2402
Price: $212.30 |
Model: 7127
Price: $161.50 |
|
|
|
AVAILABLE
PLASTIC COLORS |
|
 |
|
Available Colors for Concrete Base |
|
 |
|
DRAWING |
 |
|
HYPEL™
LLDPE 3170 UV 8 NATURAL ** LINEAR LOW DENSITY POLYETHYLENE, 7.0 MFI |
|
TYPICAL
PROPERTY VALUES† |
|
PROPERTY |
METHOD |
UNIT |
VALUE |
| PHYSICAL |
| Specific
Gravity |
ASTM
D792 |
|
0.935 |
| Metal
flow (190°C / 2.16 kg) |
ASTM
D1238 |
g/10
min |
7 |
| MECHANICAL
@ 73°F |
| Tensile
Strength at Yield |
ASTM
D638 |
psi |
2720 |
MPa |
18.8 |
| Flexural
Modulus - 1% Secant |
ASTM
D790 |
psi |
100,000 |
MPa |
655 |
| ARM
Impact 1/8" (Notched) @-40°C |
ASTM
D562B |
ft-lb/in |
79 |
| Hardness
(Shore D) |
ASTM
D785 |
- |
- |
| THERMAL |
| 264
psi - ASTM, 1.80 MPa-ISO |
ASTM
D648 |
°C |
35 |
°F |
95 |
| 66
psi - ASTM, 0.45 MPa-ISO |
ASTM
D648 |
°C |
52 |
°F |
125 |
| OTHER |
| ESCR
(100% IGEPAL) |
|
|
>1000 |
|
|
**When
used unmodified for food contact applications, this copolymer will comply
with the U.S. Food and Drug
Administration Food Additive Regulation 21 CFR 177.1520(c)3.1a. This section
does not include use in packing or
holding food during cooking. This product is limited to use in contact with
food only under the conditions of use C
through H described in table 2 of Sec. 176.170(c), and when contacting fatty
foods of Types III, IVA, V, VII-A,
and IX described in table 1 of Sec. 176.170(c), the finished articles are
to have a volume of at least 18.9 liters (5
gallons). The uses cited are subject to good manufacturing practices and
any limitations, which are part of the
regulations. The regulations should be consulted for complete details.
†The data listed here fall within the normal range of product properties,
but they should not be used to establish
specification limits or used alone as a basis for design. This information
is not intended as a warranty of any kind.
Buyers must make their own representative test and assume all risks of use,
whether used alone or in combination
with other products. Entec Polymers, LLC assumes no obligation or liability
of any advice furnished by it or results
obtained with respect to these products. All warranties expressed or implied
including warranties of merchantability
for a particular purpose or use are excluded and disclaimed. Entec Polymers,
LLC assumes no liability for use of
products in infringement of any patent. The foregoing limitation of remedy
and exclusion of liability is reflected in
and is part of the consideration for the price, at which the products are
sold by Entec Polymers, LLC. All data
displayed herein has been obtained via testing of injected molded specimens
of natural color. Pigmentation may affect
certain properties to various degrees. |
|
|
Plastic Bench Seating, Plastic
Benches, Plastic Chairs, Chairs, Plastic Two-Person Bench, Metal Bench,
Metal Armor,
Bench, Benches, Park Benches, Polysteel, Site Amenities, Site Furnishings,
and Steel Mesh Benches from your source for material handling equipment. |
Back
to Product Category |
 |
|