 |
ENGINEERED
STEEL PRODUCTS |
| Priced
Full Line Products Catalog |
20
Technology Way • West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401)
421-5679 |
|
|
|
|
Back to Product Category
|
| FEATURES
AND BENEFITS |
|
|
|
|
|
|
|
 UL® Listed |
|
Standard Count Hour Meter |
|
Certified
and listed to UL 1340 “Standard for Hoists.” |
|
|
Records
and displays the number of lowering starts
and hoist on time which is valuable for preventive
maintenance. Integral to VFD on dual speed models. |
|
|
|
|
|
| Green Initiative |
|
|
|
Built
smarter without the use of harmful materials. Environmentally friendly.
RoHS compliant. |
|
|
|
|
|
|
|
|
|
Perpendicular Orientation |
|
|
|
|
|
PT
push trolley mount hoists are configured as
perpendicular to the beam. Parallel mount is available
as an option. Note 020C and 030C models are
parallel mount as standard. |
| Notched Hook and Latch System |
|
|
|
Provides
positive closing and improves resistance
against lateral forces. |
|
|
|
|
|
|
|
| Limit Switches |
|
|
|
|
|
|
|
Dual Speed VFD |
|
Low-profile
upper and lower limit switches are
standard. |
|
|
|
|
Under-the-cover
VFD standard for dual speed hoists.
Speed ratio is 6:1 with adjustability up to 12:1. |
|
|
|
|
|
| Extended Chain Life |
|
|
|
|
|
|
|
“The Guardian”:
Smart Brake Technology |
|
Decreased
chain wear as a result of a revolutionary heat
treatment process, improved material and chain size. |
|
|
|
|
A
current driven electromagnetic brake does not
release unless the motor is energized. 10 year hoist
brake warranty. |
|
|
|
|
|
| Contactors |
|
|
|
Mechanically
interlocked, heavy-duty contactors on
single speed models. |
|
|
|
|
|
|
|
|
|
Pendant Controls |
|
|
|
Ergonomic
design for operator comfort. Red button
emergency stop is standard on all 2-button dual speed
pendants. |
|
|
|
|
|
| High Air Flow |
|
|
|
Cooler
motor and brake attributed to an engineered
motor fin, fan blade and fan cover design. |
|
|
|
|
|
|
|
|
|
Easy Access Suspension |
|
|
|
|
| Unique Load Sheave |
|
|
|
External
pins allow for quick change from hook to
lug for trolley mount configurations on most models. |
|
Increased
number of pockets reduce chain vibration and
increase chain life. 5 pockets standard; 6 pockets on
smaller body hoists. |
|
|
|
|
|
|
|
|
|
High Strength, Corrosion and
Wear Resistant
Load Chain |
|
|
|
|
| Friction Clutch and Load Brake |
|
|
|
|
Grade
80, super strength, nickel-plated load chain,
certified to DIN standards, uses unique technology
to greatly increase resistance to fatigue and wear |
|
|
Friction
clutch is standard on NER/ER models and
friction clutch with mechanical load brake standard
on ER models. Carbon friction material provides
consistent performance over a wide temperature range. |
|
|
|
|
|
|
|
|
|
|
| Electric
Chain Hoists Enhanced Features |
 |
| ELECTRIC
CHAIN HOISTS |
 |
|
|
|
|
NERP/ERP
SINGLE SPEED HOIST WITH PUSH TROLLEY - SPECIFICATIONS |
|
Cap.
(tons) |
Product
Code # |
Std.
Lift
(ft) |
Push
Button
Cord L (ft) |
Lifting
Motor 3 Phase 60 Hz. |
Flange
Width
Adjustability
B (in) |
Min.** Allow
Radius for
Curve (in) |
Load Chain
Dia. (mm) x
Chain
Fall Lines |
Net
Wgt.
(lbs) |
Weight
for Addnl.
One Ft.
of Lift (lbs) |
Output
(Hp) |
Rated
Current (amps) |
| @208V |
@460V |
Standard |
Optional |
| 1/8 |
(N)ERP001H |
10 |
8.2 |
0.75 |
3.4 |
1.7 |
2.28 to 4.00
(2.28 to 5.00) |
4.01 to 8.00
(5.01 to 8.00)
OR
8.01 to 12.00 |
43.3
(51.2) |
4.3 x 1 |
71 |
0.28 |
| 1/4 |
(N)ERP003S |
0.75 |
3.4 |
1.7 |
4.3 x 1 |
71 |
0.28 |
| 1/4 |
(N)ERP003H |
1.2 |
4.8 |
2.5 |
6.0 x 1 |
90 |
0.54 |
| 1/2 |
(N)ERP005L |
0.75 |
3.4 |
1.7 |
6.0 x 1 |
82 |
0.54 |
| 1/2 |
(N)ERP005S |
1.2 |
4.8 |
2.5 |
2.28 to 5.00 |
5.01 to 8.00
OR
8.01 to 12.00 |
51.2 |
6.0 x 1 |
90 |
0.54 |
| 1 |
(N)ERP010L |
1.2 |
4.8 |
2.5 |
7.7 x 1 |
121 |
0.89 |
| 1 |
(N)ERP010S |
2.4 |
8.6 |
4.2 |
3.23 to 6.02 |
6.03
to 12.00 |
59.1 |
7.7 x 1 |
137 |
0.89 |
| 1 1/2 |
(N)ERP015S |
2.4 |
8.6 |
4.2 |
10.2 x 1 |
187 |
1.6 |
| 2 |
(N)ERP020C |
1.2 |
4.8 |
2.5 |
7.7 x 2 |
161 |
1.8 |
| 2 |
(N)ERP020L |
2.4 |
8.6 |
4.2 |
10.2 x 1 |
190 |
1.6 |
| 2 |
(N)ERP020S |
4.7 |
16.4 |
7.9 |
10.2 x 1 |
231 |
1.6 |
| 2 1/2 |
(N)ERP025S |
4.7 |
16.4 |
7.9 |
66.9 |
11.2 x 1 |
280 |
1.9 |
| 3 |
(N)ERP030L* |
4.7 |
18.3 |
9.2 |
12.5 x 1 |
311 |
2.3 |
| 3 |
(N)ERP030C |
9.2 |
4.7 |
16.4 |
7.9 |
10.2 x 2 |
284 |
3.2 |
| 5 |
(N)ERP050L |
4.7 |
16.4 |
7.9 |
3.94 to 7.02 |
7.03 to 12.00 |
90.6 |
11.2 x 2 |
399 |
3.8 |
|
| SEE
BOTTOM TABLE BELOW FOR PRICING |
|
|
Figures
in parentheses are data for geared trolley.
*The NERP030L listed are the previous hoist models.
**Minimum Flange Width for curved beam: 1 Ton Push and 1/8 to 1 Ton Geared
= 2.87 in. 3 Ton Push or Geared = 3.50 in |
|
|
|
|
|
|
NERP/ERP
SINGLE SPEED HOIST WITH PUSH TROLLEY - DIMENSIONS |
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
DIMENSIONS
(inches) |
Cap.
(Tons) |
Product
Code |
Headroom
C
(in) |
a
(in) |
b
(in) |
e
(in) |
g
(in) |
h
(in) |
i
(in) |
j
(in) |
k
(in) |
m
(in) |
n
(in) |
r
(in) |
t
(in) |
| 1/8 |
(N)ERP001H |
15.6 |
8.0 |
7.2 |
1.8 |
1.1 |
3.2 |
2.36 |
0.8 |
3.0 |
1.9 |
3.3 |
1.5 |
0.87 |
| 1/4 |
(N)ERP003S |
15.6 |
8.0 |
7.2 |
1.8 |
1.1 |
3.2 |
2.36 |
0.8 |
3.0 |
1.9 |
3.3 |
1.5 |
0.87 |
| 1/4 |
(N)ERP003H |
16.3 |
8.0 |
7.2 |
1.8 |
1.1 |
3.2 |
2.36 |
0.8 |
3.0 |
1.9 |
3.3 |
1.5 |
0.87 |
| 1/2 |
(N)ERP005L |
16.3 |
8.0 |
7.2 |
1.8 |
1.1 |
3.2 |
2.36 |
0.8 |
3.0 |
1.9 |
3.3 |
1.5 |
0.87 |
| 1/2 |
(N)ERP005S |
16.3 |
8.0 |
7.2 |
1.8 |
1.1 |
3.2 |
2.36 |
0.8 |
3.0 |
1.9 |
3.3 |
1.5 |
0.87 |
| 1 |
(N)ERP010L |
18.5 |
9.8 |
9.3 |
2.2 |
1.2 |
4.2 |
2.8 |
1.1 |
3.7 |
2.2 |
4.4 |
2.0 |
0.98 |
| 1 |
(N)ERP010S |
18.5 |
9.8 |
9.3 |
2.2 |
1.2 |
4.2 |
2.8 |
1.1 |
3.7 |
2.2 |
4.4 |
2.0 |
0.98 |
| 1 1/2 |
(N)ERP015S |
22.4 |
11.8 |
11.0 |
2.7 |
1.3 |
5.0 |
3.35 |
1.3 |
4.4 |
2.8 |
5.2 |
2.4 |
1.26 |
| 2 |
(N)ERP020C |
27.4 |
11.8 |
11.0 |
2.7 |
1.5 |
5.0 |
3.35 |
1.3 |
4.4 |
2.8 |
5.2 |
2.4 |
1.26 |
| 2 |
(N)ERP020L |
25 |
11.8 |
11.0 |
2.7 |
1.5 |
5.0 |
3.35 |
1.3 |
4.4 |
2.8 |
5.2 |
2.4 |
1.26 |
| 2 |
(N)ERP020S |
25.6 |
11.8 |
11.0 |
2.7 |
1.5 |
5.0 |
3.35 |
1.3 |
4.4 |
2.8 |
5.2 |
2.4 |
1.26 |
| 2 1/2 |
(N)ERP025S |
26.8 |
12.6 |
12.8 |
3.1 |
1.5 |
5.8 |
3.94 |
1.4 |
5.3 |
3.1 |
6.0 |
2.7 |
1.42 |
| 3 |
(N)ERP030L* |
27.8 |
12.6 |
12.8 |
3.1 |
1.7 |
5.8 |
3.94 |
1.4 |
5.3 |
3.1 |
6.0 |
2.7 |
1.42 |
| 3 |
(N)ERP030C |
32.7 |
12.6 |
12.8 |
3.1 |
1.8 |
5.8 |
3.94 |
1.4 |
5.3 |
3.1 |
6.0 |
2.7 |
1.42 |
| 5 |
(N)ERP050L |
35.4 |
11.7 |
15.7 |
2.1 |
1.9 |
6.7 |
4.65 |
1.8 |
5.6 |
3.2 |
7.0 |
3.4 |
2.13 |
|
| *The
NERP030L listed is the previous hoist model. |
|
|
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
PRICING
FOR NERP SINGLE SPEED HOIST WITH PUSH TROLLEY |
Cap.
(Tons) |
Product Code |
Lift Spd.
(FPM) |
Price
- Standard Lifts |
Max. Lift
w/Canvas
Chain Cont. |
Chain
Cont.
Adder |
Load Chain |
Push
Button
Cord |
Total |
| 10' |
15' |
20' |
| 1/8 |
NERP001H |
55 |
|
|
|
50 |
|
|
|
|
| 1/4 |
NERP003S |
36 |
|
|
|
50 |
| 1/4 |
NERP003H |
53 |
|
|
|
50 |
|
|
|
| 1/2 |
NERP005L |
15 |
|
|
|
50 |
| 1/2 |
NERP005S |
29 |
|
|
|
50 |
| 1 |
NERP010L |
14 |
|
|
|
50 |
|
|
|
| 1 |
NERP010S |
28 |
|
|
|
50 |
| 1 1/2 |
NERP015S |
18 |
|
|
|
60 |
|
|
|
| 2 |
NERP020C |
7 |
|
|
|
26 |
|
|
|
| 2 |
NERP020L |
14 |
|
|
|
60 |
|
|
|
| 2 |
NERP020S |
28 |
|
|
|
60 |
| 2 1/2 |
NERP025S |
22 |
|
|
|
40 |
|
|
| 3 |
NERP030L* |
16 |
|
|
|
26 |
|
|
| 3 |
NERP030C |
17 |
|
|
|
20 |
|
|
| 5 |
NERP050L |
11 |
|
|
|
20 |
|
|
|
Std.
pendant hangs approximately 4 ft. above the hoist's fully extended bottom
hook. For lifts or push button cord lengths other than
standard, use 10 ft. base price plus adders for load chain and push button
cord.
Hoists may require a chain container based on the capacity, lift or suspension,
consult us.
Lifts larger than stated "Max. Lift w/Canvas Chain Cont." may
require steel chain container for balance, consult us.
Standard power supply cord 1/8 - 5 Ton is 15 ft. For optional 30 ft. length
add $131.98.
Standard power supply above 5 Ton is 30 ft
Extra per ft. over 30 ft. is $8.80.
No price deduction for shorter lengths.
Cable support hangers included for every 5 ft. of power supply cord. Thermal
motor protection is standard.
*The NERP030L listed is the previous hoist model. |
|
PRICING
FOR ERP SINGLE SPEED HOIST WITH PUSH TROLLEY |
| Cap. (Tons) |
Product Code |
Lift Spd.
(FPM) |
Price
- Standard Lifts |
Max. Lift
w/Canvas
Chain Cont. |
Chain
Cont.
Adder |
Load
Chain |
Push
Button
Cord |
Total |
| 10' |
15' |
20' |
| 1/8 |
ERP001H |
55 |
|
|
|
50 |
|
|
|
|
| 1/4 |
ERP003S |
36 |
|
|
|
50 |
| 1/4 |
ERP003H |
53 |
|
|
|
50 |
|
|
|
| 1/2 |
ERP005L |
15 |
|
|
|
50 |
| 1/2 |
ERP005S |
29 |
|
|
|
50 |
| 1 |
ERP010L |
14 |
|
|
|
50 |
|
|
|
| 1 |
ERP010S |
28 |
|
|
|
50 |
| 1 1/2 |
ERP015S |
18 |
|
|
|
60 |
|
|
|
| 2 |
ERP020C |
7 |
|
|
|
26 |
|
|
|
| 2 |
ERP020L |
14 |
|
|
|
60 |
|
|
|
| 2 |
ERP020S |
28 |
|
|
|
60 |
| 2 1/2 |
ERP025S |
22 |
|
|
|
40 |
|
|
| 3 |
ERP030C |
17 |
|
|
|
20 |
|
|
| 5 |
ERP050L |
11 |
|
|
|
20 |
|
|
|
Std.
pendant hangs approximately 4 ft. above the hoist's fully extended bottom
hook. For lifts or push button cord lengths other than
standard, use 10 ft. base price plus adders for load chain and push button
cord.
Hoists may require a chain container based on the capacity, lift or suspension,
consult us.
Lifts larger than stated "Max. Lift w/Canvas Chain Cont." may
require steel chain container for balance, consult us.
Standard power supply cord 1/8 - 5 Ton is 15 ft. For optional 30 ft. length
add $131.98.
Standard power supply above 5 Ton is 30 ft
Extra per ft. over 30 ft. is $8.80.
No price deduction for shorter lengths.
Cable support hangers included for every 5 ft. of power supply cord. Thermal
motor protection is standard. |
|
PRICING
FOR MANUAL TROLLEY SHAFT EXTENDERS |
|
Cap.
(Tons) |
Std. Flange
Width (in.) |
Flange Width
w/Ext. Shaft (in.) |
Price |
| 1/8 - 1/2 |
2.28-4.00 |
4.01-8.00 |
|
| 8.01-12.00 |
|
| 1* |
2.28-5.00 |
5.01-8.00 |
|
| 8.01-1200 |
|
| 1 1/2 - 2 |
3.23-6.02 |
6.03-12.00 |
|
| 2 1/2 - 3 |
3.23-6.02 |
6.03-12.00 |
|
| 5 |
4.92-7.02 |
7.03-12.00 |
|
|
For
flange ranges beyond this chart, consult us.
Pricing applies only when purchased with PT or GT trolleys.
*Geared trolleys 1 Ton and under use 1 Ton shaft extender. |
|
NERP/ERP
DUAL SPEED HOIST WITH PUSH TROLLEY |
 |
|
|
|
NERP/ERP
DUAL SPEED HOIST WITH PUSH TROLLEY - SPECIFICATIONS |
|
Cap.
(tons) |
Product
Code # |
Std.
Lift
(ft) |
Push
Button
Cord L (ft) |
Lifting
Motor 3 Phase 60 Hz. |
Flange
Width
Adjustability
B (in) |
Min.** Allow
Radius for
Curve (in) |
Load Chain
Dia. (mm) x
Chain
Fall Lines |
Net
Wgt.
(lbs) |
Weight
for Addnl.
One Ft.
of Lift (lbs) |
Output
(Hp) |
Rated
Current (amps) |
| @208V |
@460V |
Standard |
Optional |
| 1/8 |
(N)ERP001HD |
10 |
8.2 |
0.75 |
3.6 |
1.8 |
2.28 to 4.00
(2.28 to 5.00) |
4.01 to 8.00
(5.01 to 8.00)
OR
8.01 to 12.00 |
43.3 (51.2) |
4.3 x 1 |
71 (88) |
0.28 (.94) |
| 1/4 |
(N)ERP003SD |
0.75 |
3.6 |
1.8 |
4.3 x 1 |
71 (88) |
0.28 (.94) |
| 1/4 |
(N)ERP003HD |
1.2 |
5.1 |
2.7 |
6.0 x 1 |
90 (108) |
0.54 (1.1) |
| 1/2 |
(N)ERP005LD |
0.75 |
3.6 |
1.8 |
6.0 x 1 |
82 (99) |
0.54 (1.1) |
| 1/2 |
(N)ERP005SD |
1.2 |
5.1 |
2.7 |
2.28 to 5.00 |
5.01 to 8.00
OR
8.01 to 12.00 |
51.2 |
6.0 x 1 |
90 (108) |
0.54 (1.1) |
| 1 |
(N)ERP010LD |
1.2 |
5.1 |
2.7 |
7.7 x 1 |
121 (130) |
0.89 (1.6) |
| 1 |
(N)ERP010SD |
2.4 |
9.1 |
4.5 |
3.23 to 6.02 |
6.03
to 12.00 |
59.1 |
7.7 x 1 |
137 (146) |
0.89 (1.6) |
| 1 1/2 |
(N)ERP015SD |
2.4 |
9.1 |
4.5 |
10.2 x 1 |
187 (196) |
1.6 (2.2) |
| 2 |
(N)ERP020CD |
1.2 |
5.1 |
2.7 |
7.7 x 2 |
161 (172) |
1.8 (2.4) |
| 2 |
(N)ERP020LD |
2.4 |
9.1 |
4.5 |
10.2 x 1 |
190 (198) |
1.6 (2.2) |
| 2 |
(N)ERP020SD |
4.7 |
17.3 |
8.3 |
10.2 x 1 |
231 (240) |
1.6 (2.2) |
| 2 1/2 |
(N)ERP025SD |
4.7 |
17.3 |
8.3 |
66.9 |
11.2 x 1 |
280 (289) |
1.9 (2.5) |
| 3 |
(N)ERP030LD* |
4.7/1.6 |
19.6/9.4 |
9.8/4.7 |
12.5 x 1 |
311 (322) |
2.3 (2.9) |
| 3 |
(N)ERP030CD |
9.2 |
4.7 |
17.3 |
8.3 |
10.2 x 2 |
284 (293) |
3.2 (3.8) |
| 5 |
(N)ERP050LD |
4.7 |
17.3 |
8.3 |
3.94 to 7.02 |
7.03 to 12.00 |
90.6 |
11.2 x 2 |
399 (415) |
3.8 (4.4) |
|
| SEE
BOTTOM TABLE BELOW FOR PRICING |
|
|
*The
NERP030LD listed are the previous hoist models.
**Minimum Flange Width for curved beam: 1 Ton Push and 1/8 to 1 Ton Geared
= 2.87 in. 3 Ton Push or Geared = 3.50 in |
|
NERP/ERP
DUAL SPEED HOIST WITH PUSH TROLLEY - DIMENSIONS |
|
|
|
DIMENSIONS
(inches) |
Cap.
(Tons) |
Product
Code |
Headroom
C
(in) |
a
(in) |
b
(in) |
e
(in) |
g
(in) |
h
(in) |
i
(in) |
j
(in) |
k
(in) |
m
(in) |
n
(in) |
r
(in) |
t
(in) |
| 1/8 |
(N)ERP001HD |
15.6 |
8.0 |
7.2 |
1.8 |
1.1 |
3.2 |
2.36 |
0.8 |
3.0 |
1.9 |
3.3 |
1.5 |
0.87 |
| 1/4 |
(N)ERP003SD |
15.6 |
8.0 |
7.2 |
1.8 |
1.1 |
3.2 |
2.36 |
0.8 |
3.0 |
1.9 |
3.3 |
1.5 |
0.87 |
| 1/4 |
(N)ERP003HD |
16.3 |
8.0 |
7.2 |
1.8 |
1.1 |
3.2 |
2.36 |
0.8 |
3.0 |
1.9 |
3.3 |
1.5 |
0.87 |
| 1/2 |
(N)ERP005LD |
16.3 |
8.0 |
7.2 |
1.8 |
1.1 |
3.2 |
2.36 |
0.8 |
3.0 |
1.9 |
3.3 |
1.5 |
0.87 |
| 1/2 |
(N)ERP005SD |
16.3 |
8.0 |
7.2 |
1.8 |
1.1 |
3.2 |
2.36 |
0.8 |
3.0 |
1.9 |
3.3 |
1.5 |
0.87 |
| 1 |
(N)ERP010LD |
18.5 |
9.8 |
9.3 |
2.2 |
1.2 |
4.2 |
2.8 |
1.1 |
3.7 |
2.2 |
4.4 |
2.0 |
0.98 |
| 1 |
(N)ERP010SD |
18.5 |
9.8 |
9.3 |
2.2 |
1.2 |
4.2 |
2.8 |
1.1 |
3.7 |
2.2 |
4.4 |
2.0 |
0.98 |
| 1 1/2 |
(N)ERP015SD |
22.4 |
11.8 |
11.0 |
2.7 |
1.3 |
5.0 |
3.35 |
1.3 |
4.4 |
2.8 |
5.2 |
2.4 |
1.26 |
| 2 |
(N)ERP020CD |
27.4 |
11.8 |
11.0 |
2.7 |
1.5 |
5.0 |
3.35 |
1.3 |
4.4 |
2.8 |
5.2 |
2.4 |
1.26 |
| 2 |
(N)ERP020LD |
25 |
11.8 |
11.0 |
2.7 |
1.5 |
5.0 |
3.35 |
1.3 |
4.4 |
2.8 |
5.2 |
2.4 |
1.26 |
| 2 |
(N)ERP020SD |
25.6 |
11.8 |
11.0 |
2.7 |
1.5 |
5.0 |
3.35 |
1.3 |
4.4 |
2.8 |
5.2 |
2.4 |
1.26 |
| 2 1/2 |
(N)ERP025SD |
26.8 |
12.6 |
12.8 |
3.1 |
1.5 |
5.8 |
3.94 |
1.4 |
5.3 |
3.1 |
6.0 |
2.7 |
1.42 |
| 3 |
(N)ERP030LD* |
27.8 |
12.6 |
12.8 |
3.1 |
1.7 |
5.8 |
3.94 |
1.4 |
5.3 |
3.1 |
6.0 |
2.7 |
1.42 |
| 3 |
(N)ERP030CD |
32.7 |
12.6 |
12.8 |
3.1 |
1.8 |
5.8 |
3.94 |
1.4 |
5.3 |
3.1 |
6.0 |
2.7 |
1.42 |
| 5 |
(N)ERP050LD |
35.4 |
11.7 |
15.7 |
2.1 |
1.9 |
6.7 |
4.65 |
1.8 |
5.7 |
3.2 |
7.0 |
3.4 |
2.13 |
|
| *The
NERP030L listed is the previous hoist model. Speed ration is 6:1 with adjustability
up to 12:1. |
|
NER Dual Speed
Electric Chain Hoists
Smart Limit Option |
Our
unique Smart Limit is available on NER three phase dual speed electric chain
hoists. Unlike geared limit
switches, this Smart Limit allows the user to add upper and lower limit
positions that can be conveniently
programmed at the pendant. The soft stop feature within the Smart Limit
slows the hook down as it approaches
each limit for smooth and very precise load positioning. |
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
PRICING
FOR Electric Chain Hoists - Three Phase |
| NER/ER
- 6:1 Standard Hoist Adjustable to 12:1 Dual Speed and Smart Limit Adders
(VFD Control) |
|
| Dual Speed Hoist Price (NER/ER SERIES) |
Smart Limit (NER Series) |
Cap.
(Tons) |
Product Code |
Lift Spd.
(FPM) |
Extra $ |
Net Weight
Adder (lbs) |
Extra $ |
| 1/8 |
NER001HD |
55/9 |
|
11 |
|
| 1/4 |
NER003SD |
36/6 |
|
11 |
|
| 1/4 |
NER003HD |
53/9 |
|
17 |
|
| 1/2 |
NER005LD |
15/2.5 |
|
14 |
|
| 1/2 |
NER005SD |
29/5 |
|
17 |
|
| 1 |
NER010LD |
14/2.5 |
|
18 |
|
| 1 |
NER010SD |
28/4.5 |
|
18 |
|
| 1 1/2 |
NER015SD |
18/3 |
|
16 |
|
| 2 |
NER020CD |
7/1 |
|
16 |
|
| 2 |
NER020LD |
14/2.5 |
|
47 |
|
| 2 |
NER020SD |
28/4.5 |
|
47 |
|
| 2 1/2 |
NER025SD |
22/3.5 |
|
46 |
|
| 3 |
NER030LD* |
17/6 |
|
44 |
- |
| 3 |
NER030CD |
17/3 |
|
51 |
|
| 5 |
NER050LD |
11/2 |
|
46 |
|
|
|
*The
NER/ER030LD listed is the previous hoist model (2 speed hoist & trolley
via contactor control; trolley via VFD.
Consult us for VFD packages). |
Specify
hoist model and voltage. VFD Control is not reconnectable voltage.
Retrofit Smart Limit to existing NER Series hoist
is not available.
Smart Limit can only be added to NER dual speed (VFD Control) units.
Infinitely Variable Speed - VFD Adder (Add to Dual Speed Prices)
• 2-Step infinitely variable - add $132.02 for each infinitely variable directional axis.
• 3-Step infinitely variable - add $462.10 for each infinitely variable directional axis. |
|
| (N)ER
VFD HOIST CONTROL DESCRIPTIONS |
|
Dual
Speed Control
Uses a 2-step button and a VFD to control the speed. Pressing the button
to the first step causes the hoist to
accelerate smoothly to the low speed. Pressing the button to the second
step causes the hoist to accelerate
smoothly to the high speed. Releasing the button from the second step to
the first step causes the hoist to
smoothly decelerate to the low speed. Releasing the button completely from
any step causes the hoist to
decelerate quickly to a stop with the brake holding the load. |
|
2–Step
Infinitely Variable Control
Uses a 2-step button and a VFD to control the speed. The acceleration rate
can be changed by changing
parameters in the VFD. The 2-Step Infinitely Variable differs from Dual
Speed Control in that when releasing
the button from the second step to the first step it will maintain whatever
the speed was at the instant before
the button arrived at the first step. This allows you to hold any speed
between the low and the high speed.
If the hoist is operating at a speed that is less than high speed, and you
wish it to operate at a faster speed,
press the button to the second step to accelerate the hoist. When you reach
the desired speed, release the
button to the first step. Note that there is no deceleration function other
than completely releasing the button. |
|
3–Step
Infinitely Variable Control
Uses a 3-step button and a VFD to control the speed. This control is similar
to the 2-Step Infinitely Variable
Control with the added feature of a deceleration function. If the hoist
is operating at a particular speed and
you wish it to operate at a faster speed, press the button to the third
step to accelerate. When you reach the
desired speed, release the button to the second step to maintain that speed.
If the hoist is operating at a particular
speed and you want it to operate at a slower speed, release the button to
the first step to decelerate. When you
reach the desired speed, press the button to the second step to maintain
that speed. |
|
Harrington NERP Single Speed
Hoist, Push Trolley, Electric Chain Hoists, Chain Hoist, Three Phase,
Motor Brake, SNER Single
Phase Chain Hoists, Dust-Resistant, Water-Jet-Resistant, Chain Containers,
and Dual Speed Models from your source for material
handling equipment. |
Back
to Product Category |
 |
|
