Belt Conveyors, Portable Parts Conveyor, Incline Conveyor, Conveyors

ENGINEERED STEEL PRODUCTS

Priced Full Line Products Catalog

20 Technology Way • West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401) 421-5679

Back to Product Category

MODEL PCX
LOW PROFILE PORTABLE PART CONVEYOR
The portable Model PCX parts conveyor can be easily positioned under punch presses and extruding machines to catch small steel, plastics, or aluminum stampings, etc. Conveys them quickly up to hopper or drum.


Belt with 1” High Metal Cleats
Underside Drive
5/8” High Vertical Sides Above Cleat
Enclosed Box Construction
Belt Scraper
Adjustable Portable Support
Adjustable Portable Support

For conveyor weight see chart at bottom of page.


STANDARD SPECIFICATIONS

END DRIVE–Located on discharge end of conveyor. Chain guard located on left hand side.		TAIL PULLEY–4 in. dia. With 1 in. dia. Shaft at bearings, machine crowned.

BELT–Black Trackmate 533 COS-PVC (cover one side) with 1” high steel angle cleats on 12” centers. Clipper unibar lacing.	BELT RETURN–Belt cleats slide on flat metal return guide.

	TAKE-UP–Take-ups at tail pulley. Provides 6 in. of belt take-up.

BED–7-1/4 in. x 12 ga. powder painted steel, formed side channel with bolted in slider bed which provides 1 in. high sides above belt.

	BEARINGS–Sealed, pre-lubricated, self-aligning ball bearings on drive and tail shafts.

BELT SCRAPER–Mounted inside conveyor bed section to clean underside of return belt.
	SPEED REDUCTION–Sealed worm gear C-Face speed reducer. No. 50 roller chain to drive sprocket.

PORTABLE SUPPORT–Undercarriage is adjustable from 4 in. to 30 in. with 6 in. dia. rubber wheels.
	MOTOR–1/2 HP–208/230/460/575V–3 Ph. 60 Hz. Totally Enclosed C-Face.

	BELT SPEED–Constant 25 FPM.

DRIVE PULLEY–4 in. dia. with 1 in. dia. shaft at bearings, machine crowned and fully lagged.

	CAPACITY–100 lbs. total distributed live load.


OPTIONAL EQUIPMENT

FLOOR SUPPORTS–MS Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee braces recommended above MS-3 support.		O-RING DRIVE CHAIN–With sealed in lubricant (Recommended for applications that do not permit regular lubrication).

		V-BELT DRIVE–V-belt supplied between motor and reducer.

		MOTORS–Energy efficient, single phase, other characteristics. 1 HP maximum.

OVERHEAD END DRIVE–Motor reducer unit mounted 9-1/4 in. above cleat.

		ELECTRICAL CONTROLS–One direction manual start switch, non-reversing magnetic starters, push button stations, power cord. AC variable frequency drive.

INCLINE–45° in place of standard 36° requires 15-3/4” incline section. Other horizontal and incline lengths available.


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click a Price of the item you wish to purchase.


PRICES FOR COMPLETE CONVEYOR INCLUDE:

Black Trackmate #533 COS with 1" High Steel Angle Cleats on 12" Centers		1/2 HP - "C" Face Totally Enclosed Motor (Specify Exact Voltage)

7-1/4" x 12 Ga. Steel Formed Side Channels with Bolted in Slider Bed Providing 1" High Sides Above Belt		Totally Enclosed Chain Guard

		25 FPM Constant Belt Speed

		Less Electrical Controls

Portable Base Support
Portable Base Support

"C" Face Speed Reducer - Sealed Worm Gear

Location (See Drawing)	Description	Length Angle Degree	Belt Width
			12"	18"	24"
			Between Rail Width
			12-1/8"	18-1/8"	24-1/8"
			Overall Frame Width
			15-1/8"	21-1/8"	27-1/8"
1	Horizontal Tail Assembly	30"	$1,080	$1,238	$1,395
1		42"	$1,430	$1,652	$1,873
1		54"	$1,785	$2,066	$2,351
1		66"	$2,135	$2,482	$2,826
1		78"	$2,486	$2,895	$3,306
1		90"	$2,836	$3,310	$3,783
1		102"	$3,187	$3,725	$4,262
1		114"	$3,540	$4,139	$4,741
2	Incline Joint Angle	36°	$349	$416	$478
2	Incline Joint Angle	45°	$441	$517	$599
3	Incline Drive Assembly	45"	$3,359	$3,594	$3,834
3		54"	$3,622	$3,904	$4,190
3		66"	$3,969	$4,318	$4,664
3		75" *	$4,085	$4,478	$4,871
3		84" *	$4,350	$4,787	$5,233
3		93" *	$4,610	$5,100	$5,587
3		102" *	$4,871	$5,408	$5,946
3		111" *	$5,139	$5,721	$6,307
3		120" *	$5,399	$6,032	$6,664

IMPORTANT NOTES...

OTHER WIDTHS

For "IN-BETWEEN WIDTHS", use
next width plus 10%. For widths over
27-1/8" OAW, contact us.

NON-STANDARD WIDTHS

*Less Portable Base Support - See Floor Support Chart below
for Support Add-On Price.


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click a Price of the item you wish to purchase.

PRICES FOR OPTIONAL EQUIPMENT

OPTIONAL DRIVES

MOTORS

Drive Type	BELT WIDTHS
Drive Type	12" to 18"	24"
End Drive C-Face	N/C	N/C
End Drive V-Belt	$246.50	$246.50
Overhead C-Face	$552.60	$704.30
Overhead V-Belt	$798.90	$949.80

Extra Motor Price for OTHER THAN: 1/2 HP -
208/230/460/575V - 3 Ph - 60 Hz. - Totally
Enclosed.

Speed Affects horsepower requirements.

H.P. REQ.	TOTALLY ENCLOSED		ENERGY EFFICIENT
H.P. REQ.	200/208/230/ 460/575V 3 Ph.-60 Hz.	115/230V 1 Ph.-60 Hz.	230/460V 3 Ph.-60 Hz.	575V 3 Ph.-60 Hz.
1/2	N/C	$39.30	$400.90	$400.90
1	N/A	$143.20	$498.10	$498.10

#50 O-Ring Drive Chain ................Add .......

$284.40

FLOOR SUPPORTS

Deduct Portable Base and Add Price for 3 Supports.
Specify top of belt elevation.

"PCXS" SUPPORT

Model No.	Adjustment to Top of Belt	Price Each
PCXSL-01	9-1/4" to 10-1/4"	$58.40
PCXSL-02	10-1/4" to 12"	$58.40
PCXSL-03	12" to 14-5/8"	$58.40
PCXS-01	14-1/4" to 16"	$58.40
PCXS-01.2	15-1/4" to 17"	$58.40
PCXS-01.4	16-1/4" to 18"	$58.40
PCXS-02	17-1/4" to 20-1/4"	$60.40
PCXS-03	19-7/8" to 22-7/8"	$95.70
PCXS-04	22-7/8" to 28-7/8"	$105.70
PCXS-05	26-7/8" to 32-7/8"	$108.90
PCXS-06	30-7/8" to 42-7/8"	$117.10
PCXS-07	40-7/8" to 52-7/8"	$130.20
PCXS-08	52-7/8" to 64-7/8"	$148.50
PCXS-09	64-7/8" - 76-7/8"	$162.80
PCXS-10	76-7/8" to 88-7/8"	$185.60
PCXS-11	86-7/8" to 98-7/8"	$205.20
PCXS-12	98-7/8" to 110-7/8"	$214.60

CONSTANT AND VARIABLE SPEEDS

Constant C-Face - Within 17-25 FPM ....No Charge

Constant V-Belt - Minimum of 4 FPM ......................

................................Use V-Belt Drive Add-On

Constant Speeds Below Those Listed Above........

.............................................................Contact us

Variable Speed ...............See Electrical Controls
and Drive Section Below

DRIVE COMPONENT DEDUCTS

Less Motor Drive, Motor Mount and Guards,

but with Shaft Extension .......Deduct .........

$694.20

Less Motor Only (1/2 HP - 208/230/460/575V -

3 Ph -60 Hz.) ................Deduct...................

$258.30

*Less Reducer ...........Deduct......................

$307.40

*Less V-Belt Guard, Chain Guard, sheaves and
sprockets when V-Belt drive is supplied. Less chain
guard and sprockets when C-Face drive is supplied.

ELECTRICAL CONTROLS

See below

NOTE: PCXS-3 to PCXS-12 AND PCXDS-06 to
PCXDS-12: Knee Braces included in price.

Less Portable Base ...........Deduct .................. $136.20

"PCXDS" SUPPORT

GALVANIZING

Model No.	Adjustment to Top of Belt	Price Each
PCXDS-06	30-7/8" to 42-7/8"	$117.10
PCXDS-07	40-7/8" to 52-7/8"	$130.20
PCXDS-08	52-7/8" to 64-7/8"	$148.50
PCXDS-09	64-7/8" - 76-7/8"	$162.80
PCXDS-10	76-7/8" to 88-7/8"	$185.60
PCXDS-11	86-7/8" to 98-7/8"	$205.20
PCXDS-12	98-7/8" to 110-7/8"	$214.60


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click a Price of the item you wish to purchase.

ELECTRICAL CONTROLS AND DRIVE SECTION

MANUAL START SWITCH or
SAFETY DISCONNECT

LIMIT SWITCH, SINGLE POLE,
WITH NYLON ROLLER LEVER

#032.1014.........................................

$213.01

#033.2032 & #033.2072..................$555.67
Nema 4

"START-STOP", Nema 1, One direction, 30
AMP, 3 Pole (Single or 3 phase)

LIMIT SWITCH, DOUBLE POLE,
WITH NYLON ROLLER LEVER

#033.2033& #033.2072...................$332.11
Nema 4

REVERSING DRUM SWITCH

#032.103..........................................

$854.26

"Fwd-Stop-Rev", Nema 1, for 1-1/2 HP at
115 volts or 2 HP at 230 volts single phase,
or 2 HP max. three phase

PROXIMITY SWITCH, INDUCTIVE,
(METAL SENSING)

#032.210.........................................$205.35
115 Volt AC, two wire with ground, 30mm dia.,
10mm range

FOOT SWITCH WITH GUARD

#032.211.........................................$243.09
24 Volt DC, two wire with ground, 30mm dia.,
10mm range

#032.200........................................... $270.29
(Constant Pressure) "On-Off" type, Nema 1,
Pilot Control or 1 HP max. single phase.

PHOTO EYE, ON-OFF TYPE

#EA-000005......................................$1,059.27
Banner Q45 Retro Reflective Photo Eye Kit
with timing module, reflector and mounting
brackets. Photo Eye output is one form C
type relay, Operating voltage
24-250VAC/12-250VDC

POWER CORD AND PLUG (20')

POWER CORD WITH PLUG ONLY 20' LONG
Model No.	Voltage	HP Rating	Prices
EA-039-1A	115/1	1/2-3/4	$106.67
EA-039-2A	115/1	1	$106.67
EA-039-3A	115/1	1 1/2	$155.18
EA-039-4A	230/1	1/2-1	$106.67
EA-039-5A	230/1	1 1/2-2	$109.67
EA-039-6A	208-230/3	1/2-2	$178.60
EA-039-7A	460/3	1/2-2	$178.60

POWER CORD WITH PLUG 20' LONG WITH MANUA
Model No.	Voltage	HP Rating	Prices
EA-039-1B	115/1	1/2-3/4	$173.16
EA-039-2B	115/1	1	$330.67
EA-039-3B	115/1	1 1/2	$377.96
EA-039-4B	230/1	1/2-1	$293.04
EA-039-5B	230/1	1 1/2-2	$330.67
EA-039-6B	208-230/3	1/2-2	$362.97
EA-039-7B	460/3	1/2-2	$362.97

MOUNTING BRACKETS FOR PHOTO
EYE #033.2122

B-05165...........................................$118.10

AIR PRESSURE SWITCH

#094.191........................................$691.31
Nema 4

EMERG. STOP PULL CORD SWITCH

#032.285 with 032.2851 Turnbuckle
...........................................................$696.08
Nema 4

"RED" EMERGENCY PULL CORD
CABLE AND MOUNTING HARDWARE

#032.281...one side.................$7.44 per / ft.
both sides..............$15.87per / ft.

EMERGENCY PUSH BUTTON

#032.284..........................................$279.61
Nema 4

PHOTO EYE, 18MM DIA., DIFFUSED,
(PHOTO PROX.) 115 VOLT, LIGHT
OPERATE, 2-METER CABLE

#032.2113 (100mm range, 3.94")....$1,066.27
#032.2116 (200mm range, 7.87")....$194.14
#033.218 (400mm range, 15.74")....$293.48

NOTE: PRICING LISTED NOT MOUNTED
OR WIRED

"PHOTO EYE, RETRO-REFLECTIVE,
(POLARIZED) 24 VOLT DC

#033.2128 with 032.21122 Cable.....$239.09
#032.21122 (Cable Only)...................$72.37


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click a Price of the item you wish to purchase.

CONTROLLER PRICES

AC VARIABLE SPEED CONTROLLER ONLY
SINGLE PHASE CONTROLLER INPUT
Motor Size	115 Volt		208/230 Volt
1/2	VSC-12-10		VSC-12-12
Price	$1,491.84		$1,189.37
1	VSC-12-11		VSC-12-13
Price	$1,724.27		$1,391.05
2	N/A		VSC-12-14
Price	~		$1,794.20
THREE PHASE CONTROLLER INPUT
Motor Size	208/230 Volt	460 Volt	575 Volt
1/2	VSC-01-15	VSC-01-18	VSC-12-29
Price	$1,564.99	$1,656.34	$2,155.73
1	VSC-01-16	VSC-01-19	VSC-12-29
Price	$1,579.75	$1,794.20	$2,155.73
2	VSC-01-17	VSC01--20	VSC-12-30
Price	$1,978.69	$2,070.37	$2,663.45

REPLACEMENT INVERTER DUTY
ENERGY EFFICIENT MOTORS

HP	Part No.	Price
1/2	032.351 230/460	$618.71
1	032.353 230/460	$705.52
2	032.355 230/460	$797.31
1/2	032.3512 575	$1,449.11
1	032.3532 575	$1,611.17
2	032.3552 575	$1,897.10

IMPORTANT NOTES...

• All above motors are 230 / 460 / 575 Volt, 3 Phase.
• All above V/S Drive Kits include NEMA 1 / IP30
Junction Box, Controller and Motor.
• Good for cycle rates of up to 15 cycles per minute, at
1/2 second ramp time, with a maximum speed of 250
FPM.
• Drawing No. DG-001146.

OPTIONAL: Mounting and Wiring Add-On . . .
(mounted close to the motor)

$675.20

• When AC Variable Speed Controller is used with a
Brake Motor, A Brake Relay Kit (EA-068A) is
required. Add an additional $542.68 for this option.)

Brake Relay Kit (EA-068A)..............................

$542.68

ELECTRONIC CLUTCH BRAKE DRIVE PACKAGE

Part No.	Description	Price
EA-VSC-01-CB	2 HP Electronic Clutch-Brake Kit	$5,058.00

OPTIONAL: Mounting and Wiring Add-on .
(mounted close to the motor)

$675.20

KIT INCLUDES

Part No.	Description
VSC-01-20	AC Variable Speed Controller, 460 Volt, 3 Phase
032.345	2 HP 460 Volt, 3 Phase, C-Face Motor TEBC (Blower Cooled) With 5AC Reducer and #60 Chain and Sprockets

IMPORTANT NOTES

• Good for cycle rates of up to 60 cycles per minute.
• 1/10 second Accel and Decel time, with 350 FPM
Maximum Speed.
• 230 or 460 Volt Only, Other Voltages, Contact us.
• Motor Cooling Blower is 115 Volt, 1 Phase, 60 Hz.
• Price Includes 5AC Reducer and #60 Chain and
Sprockets

Part No.	Description
VSC-01-17	AC Variable Speed Controller, 230 Volt, 3 Phase
032.345	2 HP 230 Volt, 3 Phase, C-Face Motor TEBC (Blower Cooled) With 5AC Reducer and #60 Chain and Sprockets


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click the Model No. of the item you wish to purchase.

THIS STARTER LISTING MEETS TYPE "2"
COORDINATION (Defined)

An International Electrotechnical Commission (IEC) term that means: “under short circuit
conditions, the starter shall cause no danger to persons or installation and shall be
suitable for further use.” The only allowable damage to the starter is light contact burning
or tack welding, provided the contacts are separable. Starters meeting this level of com-
ponent protection provides users with less down time and lower replacement costs.

THREE PHASE, IEC COMBINATION MAGNETIC STARTERS
H.P.	MOTOR DUTY	NON-REVERSING					REVERSING
H.P.	MOTOR DUTY	208 VOLT	230 VOLT	460 VOLT	575 VOLT	PRICE	208 VOLT	230 VOLT	460 VOLT	575 VOLT	PRICE
1/2	STANDARD EASY CLEAN ENERG. EFF.	EN-20B40	EN-23B25	EN-46B16	EN-57B10	$1516.60	ER-20B40	ER-23B25	ER-46B16	ER-57B10	$2,023.30
			EN-23B25	EN-46B16				ER-23B25	ER-46B16
			EN-23B16	EN-46B10				ER-23B16	ER-46B10
1	STANDARD EASY CLEAN ENERG. EFF.	EN-20B40	EN-23B40	EN-46B25	EN-57B16		ER-20B40	ER-23B40	ER-46B25	ER-57B16
			EN-23B40	EN-46B16				ER-23B40	ER-46B16
			EN-23B40	EN-46B16				ER-23B40	ER-46B16
1-1/2	GEARMOTORS	EN-20C10	EN-23B63	EN-46B40	EN-57B25		ER-20C10	ER-23B63	ER-46B40	ER-57B25
			EN-23B63	EN-46B25				ER-23B63	ER-46B25
			EN-23B63	EN-46B25				ER-23B63	ER-46B25
2	STANDARD EASY CLEAN ENERG. EFF.	EN-20C10	EN-23C10	EN-46B40	EN-57B40		ER-20C10	ER-23C10	ER-46B40	ER-57B40
			EN-23C10	EN-46B40				ER-23C10	ER-46B40
			EN-23B63	EN-46B40				ER-23B63	ER-46B40

SINGLE PHASE, IEC COMBINATION MAGNETIC STARTERS
H.P.	NON-REVERSING		REVERSING		NON-REVERSING		REVERSING
	115 VOLT	PRICE	115 VOLT	PRICE	230 VOLT	PRICE	230 VOLT	PRICE
1/2	EN-1SC10	$1,182.40	ER-1SC10	$2,023.30	EN-2SB63	$1,435.60	ER-2SB63	$2,023.30
1	EN-1SC16		ER-1SC16		EN-2SC10		ER-2SC10
1-1/2	EN-1SC20		ER-1SC20		EN-2SC10		ER-2SC10
2	EN-1SC20		ER-1SC20		EN-2SC10		ER-2SC10


• Manual Start-Stop Switch Kit			• Start-Stop Push Button Kit, Remote Mounted
	EA-000001 ......................................	$242.09		EA-000002.......................................	$242.09
	Includes: 032.1014 Manual Start Switch, Nema 1, B-21467 Mounting Bracket with Mounting Hardware			Includes: 033.1955 Push Button Station, One Direction, Nema1, B-21467 Mounting Bracket with Mounting Hardware

• Forward-Reverse-Stop Push Button Kit, Remote Mounted

			• Up-Down-Stop Push Button Kit, Remote Mounted
	EA-000003.......................................	$440.67	• Up-Down-Stop Push Button Kit, Remote Mounted
	Includes: 033.1965 Push Button Station, Reversing, Nema1, B-21467 Mounting Bracket with Mounting Hardware			EA-000004.......................................	$440.67
				Includes: 033.1975 Up Down Stop Push Button Station, Reversing, Nema 1, B-21467 Mounting Bracket with Mounting Hardware


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click a Price of the item you wish to purchase.


• “Start-Stop” Push-button Station				• “Start-Stop”Push-button Station
033.1955			$211.23		033.195.................................................	$142.50
Remote mounted, Nema 1					To be mounted in Mag Starter Cover

• “Fwd-Rev-Stop” Push-button Station				• “Fwd-Rev-Stop”Push Button Station
033.1965			$397.05		033.196..................................................	$490.95
Remote mounted, Nema 1					To be mounted in Mag Starter Cover

• “Up-Down-Stop” Push-button Station				OPTIONAL STARTER CONTROLS
033.1975			$397.05	OPTIONAL STARTER CONTROLS
033.1975			$397.05	• Auto Restart Control, 3 Phase, Non-Reversing
Remote mounted, Nema 1				• Auto Restart Control, 3 Phase, Non-Reversing
Remote mounted, Nema 1					EA-011 ............................................ Includes: Photo Eye (033.2122), Dual Time Delay Module (033.2172), Combination Magnetic Starter with extra Contactor (033.160), and a Control Circuit Transformer (As Required), & Pushbutton Station (033.195).	$3,210.68
						$3,210.68

IMPORTANT NOTES
• Control Circuit Transformer Included for 115 Volt Control Voltage. • Above starters are in Nema 3, 4 and 12 Enclosures. • The starters included Safety Disconnect, Overload Relay, and Aux. Contacts as required. • IF AN ORDER IS SUPPLIED LESS MOTOR, AND IS SUPPLYING ANY ELECTRICAL CONTROLS, THEN MOTOR HP, VOLTAGE, PHASE, AND FULL LOAD CURRENT MUST BE STATED ON THE ORDER. • PRICING LISTED IS NOT MOUNTED OR WIRED.

				• Auto Restart Control, 1 Phase, Non-Reversing
					EA-012 (115 Volt) ........................... EA-017 (230 Volt) ........................... Includes: Photo Eye (033.2122), Dual Time Delay Module (033.2172), Combination Magnetic Starter with extra Contactor (033.160), Pushbutton Station (033.195), and (230 V. Only) a Control Circuit Transformer (As Required). Note: Above Price does NOT include Photo Eye Mounting Bracket.	$3,253.63
						$3,391.27

• Add on	$192.70	for the above Push Buttons
to be Mounted.
• Add on	$995.10	for the above Starters and
Push Button Stations to be Mounted and Wired. Supply 20'0" of cable for push button only.

				• Mounting Brackets for photo eye
				• Mounting Brackets for photo eye
					#033.2122 B-05165 ..............................................
						$118.10

CONVEYOR WEIGHT TABLE

Overall Frame Width	Between Rail Width	Belt Width	"A"	"B"	"C"	"D"	Weights (Lbs.)
15 1/8"	12 1/8"	12"	30"	45"	82 3/4"	32"	268
15 1/8"	12 1/8"	12"	30"	54"	90 1/8"	37 1/4"	279
15 1/8"	12 1/8"	12"	30"	66"	99 3/4"	44 3/8"	294
15 1/8"	12 1/8"	12"	42"	45"	94 3/4"	32"	277
15 1/8"	12 1/8"	12"	42"	54"	102 1/8"	37 1/4"	309
15 1/8"	12 1/8"	12"	42"	66"	111 3/4"	44 3/8"	303
21 1/8"	18 1/8"	18"	30"	45"	82 3/4"	32"	298
21 1/8"	18 1/8"	18"	30"	54"	90 1/8"	37 1/4"	309
21 1/8"	18 1/8"	18"	30"	66"	99 3/4"	44 3/8"	331
21 1/8"	18 1/8"	18"	42"	45"	94 3/4"	32"	309
21 1/8"	18 1/8"	18"	42"	54"	102 1/8"	37 1/4"	323
21 1/8"	18 1/8"	18"	42"	66"	111 3/4"	44 3/8"	342
27 1/8"	24 1/8"	24"	30"	45"	82 3/4"	32"	332
27 1/8"	24 1/8"	24"	30"	54"	90 1/8"	37 1/4"	348
27 1/8"	24 1/8"	24"	30"	66"	99 3/4"	44 3/8"	370
27 1/8"	24 1/8"	24"	42"	45"	94 3/4"	32"	343
27 1/8"	24 1/8"	24"	42"	54"	102 1/8"	37 1/4"	359
27 1/8"	24 1/8"	24"	42"	66"	111 3/4"	44 3/8"	381

All weights are conveyor weights only.

Accessories, crating, etc., are not included.

Belt Conveyors, Cleated Belt, Conveyor, Conveyor Belt, Portable Parts Conveyor, Incline Conveyor, Low Profile Conveyor, Parts
Conveyor, Portable Belt Conveyors, Conveyors, and Slider Bed from your source for material handling equipment.

Back to Product Category

Home - Order - Search - Quote - Contact Us - About Us - My Account - Shopping Cart

MODEL PCX

LOW PROFILE PORTABLE PART CONVEYOR

Belt Conveyors, Cleated Belt, Conveyor, Conveyor Belt, Portable Parts Conveyor, Incline Conveyor, Low Profile Conveyor, Parts Conveyor, Portable Belt Conveyors, Conveyors, and Slider Bed from your source for material handling equipment.

LOW PROFILE PORTABLE
PART CONVEYOR

Belt Conveyors, Cleated Belt, Conveyor, Conveyor Belt, Portable Parts Conveyor, Incline Conveyor, Low Profile Conveyor, Parts
Conveyor, Portable Belt Conveyors, Conveyors, and Slider Bed from your source for material handling equipment.