 |
ENGINEERED
STEEL PRODUCTS |
| Priced
Full Line Products Catalog |
20
Technology Way • West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401)
421-5679 |
|
|
|
|
Back
to Product Category
MODEL
138-ACC
|
HORIZONTAL
POWER CONVEYOR
(ACCUMULATING TYPE)
|
 |
|
The
simplest method ever devised for
accumulating cartons, boxes, etc.
Basic design eliminates complicated
adjustments and allows a minimum
of 2% back pressure. |
|
|
|
•
4 Bed Widths
• 2% Minimum Back Pressure
• Finger Tip Snub Roller Adjustment,
No Tools Needed
• Reversible
• Adjustable LS-Type Floor Supports
Available |
|
|
|
 |
|
STANDARD
SPECIFICATIONS |
|
|
|
BED - Roller bed with 1-3/8 in. dia. roller x 18 ga.
galvanized tube spaced every 5/16 in. HRS hex shaft
spaced every 1-1/2 in. and 1-3/8 in. dia. pressure
roller x 18 ga. galvanized tube spaced every 3 in.
Mounted in 6-1/2 in. x 12 ga. powder painted
formed steel channel frame bolted together with butt
couplings. |
|
BEARINGS - Sealed, pre-lubricated ball bearings
with eccentric lock collar on flange and pillow block
bearings. Pre-lubricated ball bearings in tread &
pressure rollers. |
|
|
|
SPEED
REDUCTION - Sealed worm gear C-Face
speed reducer. No. 50 roller chain to drive shaft. |
|
|
CROSS
BRACING - Rods with turnbuckles are
fastened to underside of bed to provide proper
alignment of bed rollers and insure correct product
tracking. Supplied on every other section, 20 ft.
bed lengths and over. Supplied on bed lengths 9 ft.
and over. |
|
|
|
MOTOR -
1/2 HP-208/230/460/575V-3 Ph.
60 Hz. Totally Enclosed C-Face. |
|
|
|
CONVEYING SPEED - Constant 65 FPM. |
|
|
|
CAPACITY - Maximum load per linear foot of
conveyor 50 lbs. NOT TO EXCEED capacity in
chart. |
|
|
DRIVE - Mounted underneath, placed near center
of conveyor. |
|
|
|
|
|
FLOOR
SUPPORTS - Now supplied as optional
equipment. |
DRIVE
BELT - Endless B-section aramid core
V-Belt drives each section of conveyor. |
|
|
|
|
|
|
RETURN TAKE-UP
SHEAVE - 3-1/4 in. dia. x
1/2 in. bore flat idler has seven position adjustment to
maintain proper V-belt tension. |
|
|
|
|
|
|
| HOW
IT WORKS! |
The driving of the tread rollers
on the minimum pressure conveyor is accomplished with the top surface
of a standard
section endless V-belt. The strength and wear qualities of the tread rollers
and this belt have been thoroughly tested
for continuous duty. |
|
|
|
|
To
maintain the driving of the tread roller, the pressure roller is mounted
in spring adjusted carriers (See Photo below)
which sense the required driving friction regardless of the length of accumulated
load. This pressure can be maintained
constantly to give a 2% minimum back pressure in either a forward or reverse
direction. |
|
|
|
|
In
the event of extreme changes in unit load (weight of box or package), convenient
knurled thumb adjusting nuts can
be turned to accept this heavier load. |
|
|
|
|
This
method eliminates the need for selecting proper tension spring holes in
trigger mechanisms or jogging cleats on
driving belt and eccentric (off center) tread rollers. |
|
|
|
|
By
maintaining a constant minimum pressure on the tread rollers, long loads
may be conveyed, accumulated or stopped
on the conveyor at any point using very little motor horsepower and giving
practically no pressure between boxes or
packages. |
|
|
|
|
 |
|
|
|
|
LOAD CAPACITY CHART @ 65 FPM |
HP |
OVERALL FRAME WIDTH 12" TO 24" |
TOTAL LOAD (LBS.) |
UP TO 100' |
1/2 |
1000 |
1 |
1500 |
|
|
|
|
|
|
|
|
|
|
|
|
OPTIONAL
EQUIPMENT |
|
|
|
FLOOR
SUPPORTS–LS Type floor supports are
available with a wide range of adjustment. Specify top
of belt or roller elevation. One support required at
every bed joint and ends of conveyor. Holes in feet
for lagging to floor. Knee braces recommended
above LS-6 support. |
|
PACKAGE STOPS - Roller or pin type stops
available, contact us. |
|
ROLLER CENTERS - Tread rollers spaced every
1-1/2 in. |
|
|
|
GUARD
RAILS - Adjustable Universal Channel
Guard Rail, fixed channel or type A & B angle.
NOTE: If product comes in contact with guard
rails, product flow will be affected. Fixed channel
overlapping, one direction. Fixed channel nonover-
lapping, reversing. |
|
|
CONVEYING
SPEED - Other constant and variable
speeds from 25 to 120 FPM. NOTE: Capacity and
accumulation feature affected with speed change. |
|
|
|
SIDE
MOUNTED CENTER DRIVE - Motor
reducer unit mounted to side of conveyor. Minimum
elevation with standard sheave retainer 10 in. With
low elevation sheave retainer 8 in. 9-3/8 in. elevation
at drive, 9-7/8 in. elevation with standard sheave return.
8 in. elevation with low elevation sheave return
(intermediate only). |
|
|
|
|
POLY-TIER SUPPORTS - 36 in. to 120 in. support
heights in 6 in. increments. Knee braces supplied. |
|
|
|
CEILING HANGER - 5/8 in. dia. x 8 ft. long un-
plated rods fully threaded. Other lengths and galvanized
rods available. |
|
|
|
MOTORS - Energy efficient, single phase, other
characteristics. 3/4 HP maximum. |
|
|
V-BELT
DRIVE - V-Belt supplied between motor
and reducer. Minimum overall drive width 14 in. |
|
|
|
|
ELECTRICAL
CONTROLS - Non-reversing or
reversible magnetic starters and push-button stations.
AC variable fequency drive. |
|
|
O-RING
DRIVE CHAIN–With sealed in lubricant
(Recommended for applications that do not permit
regular lubrication). |
|
|
|
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
|
|
|
| PRICES
FOR COMPLETE CONVEYOR INCLUDE: |
|
|
|
|
*
1-3/8" Dia. x 18 Ga. Galvanized Roller (rollers on 3"
Centers) in a 6-1/2" x 12 Ga. Channel frame.
* Driving V-Belt
* "C" Face Speed Reducer - Sealed Worm Gear
* 1/2 HP - "C" Face Totally Enclosed Motor
(Specify Exact Voltage)
* Totally Enclosed Chain Guard
* 65 FPM Constant Conveying Speed
* End Guards
* Less Electrical Controls
* Less Floor Supports |
|
SIZE TO ORDER Overall Length
"A" |
Between Rail Widths |
10" |
13" |
16" |
22" |
Overall Frame Widths |
| 12" |
15" |
18" |
24" |
| 5' |
|
|
|
|
| 10' |
|
|
|
|
| 15' |
|
|
|
|
| 20' |
|
|
|
|
| 25' |
|
|
|
|
| 30' |
|
|
|
|
| 35' |
|
|
|
|
| 40' |
|
|
|
|
| 45' |
|
|
|
|
| 50' |
|
|
|
|
| 55' |
|
|
|
|
| 60' |
|
|
|
|
| 65' |
|
|
|
|
| 70' |
|
|
|
|
| 75' |
|
|
|
|
| 80' |
|
|
|
|
| 85' |
|
|
|
|
| 90' |
|
|
|
|
| 95' |
|
|
|
|
| 100' |
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
Conveyor
sections are easily coupled together at either
end to make up to 100 ft. long units. Drive is usually
located at center of conveyor length. |
|
|
|
|
|
|
|
| *Refer
to the bottom of the page for conveyor weights. |
|
|
|
| IMPORTANT
NOTES |
•
BED LENGTHS
Intermediate bed sections are available in multiples
of 4', 5', 6', 7-1/2', 8', and 10' lengths only. |
•
OTHER LENGTHS
Other lengths not listed in price chart are available.
For "IN-BETWEEN SIZES", use next larger Overall
Length "A" price. SEE BED LENGHTS BELOW. |
•
STANDARD WIDTHS
All standard widths to be offered in 1 FOOT length
increments beginning at 10’ OAL. |
• OTHER WIDTHS
For “IN-BETWEEN WIDTHS”, use next width
plus 10%. For widths up to 30” OAW, interpolate plus 10%.
•
NON-STANDARD WIDTHS
Contact
us for lead time.
• INTERMEDIATE BEDS
Use per foot price of width x required length, supports not
included.
• DRIVE LOCATION
Drive is mounted
in approximate center of conveyor length on multiple bed lengths only.
• MAXIMUM LENGTH
Maximum Overall
Length "A" is 100' with one (1) Drive.
• FLOOR SUPPORTS
Floor supports are not included
in base price. There are two (2) stationary floor supports required for
the
first bed section and one (1) support required per bed section
thereafter. |
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
|
|
|
|
|
|
|
|
| PRICES
FOR OPTIONAL EQUIPMENT |
|
|
|
|
|
|
|
|
|
| OPTIONAL
DRIVE |
|
CONSTANT
AND VARIABLE SPEEDS |
DRIVE
TYPE |
OVERALL FRAME WIDTH |
| 12" TO 24" |
| Underside
Drive (V-Belt) |
|
| Side Mounted (C-Face)* |
|
|
|
|
Constant - C-Face
Within 25 - 90 FPM... |
No
Charge |
|
|
Variable
Speed....See Electrical Controls and Drive
Section Below. |
|
|
NOTE: Speeds other than 65 FPM will drastically
affect accumulation feature. |
|
|
|
|
|
|
|
| *
9-1/2" minimum elevation |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DRIVE
COMPONENT DEDUCTS |
| #50
O-Ring Drive Chain ........ Add ........ |
$284.40 |
|
|
|
|
Less
Motor Drive, Motor Mount and Guards, but with |
| #60
O-Ring Drive Chain ........ Add ........ |
$386.70 |
|
|
|
|
Shaft
Extension..............Deduct............. |
$694.20 |
|
|
|
|
|
|
|
| FLOOR
SUPPORTS |
|
|
Less
Motor Only (1/2 HP-208/230/460/575V- |
Not
included in base price. Use chart below for required
elevation. |
|
|
3
Ph.-60 Hz).............Deduct......................
*Less Reducer..........Deduct...................... |
$258.30 |
|
$307.40 |
|
|
|
|
|
|
|
*Less
V-Belt Guard, Chain Guard, sheaves and
sprockets when V-Belt drive is supplied. Less chain
guard and sprockets when C-Face drive is supplied. |
|
| "LS" SUPPORT |
| Model No. |
Adjustment to Top of Roller |
Price Each |
| LSL-1* |
8-3/4" to 9-3/4" |
|
| LSL-2* |
9-3/4" to 11-1/2" |
|
| LSL-3* |
11-1/2" to 14-1/8" |
|
| LS-1* |
14-1/16" to 15-13/16" |
|
| LS-1.2* |
15-1/16" to 16-13/16" |
|
| LS-1.4* |
16-1/16" to 17-13/16" |
|
| LS-2* |
17-1/16" to 20-1/16" |
|
| LS-3 |
19-11/16" to 22-11/16" |
|
| LS-4 |
22-11/16" to 28-11/16" |
|
| LS-5 |
26-11/16" to 32-11/16" |
|
| LS-6 |
30-11/16" to 42-11/16" |
|
| LS-7 |
40-11/16" to 52-11/16" |
|
| LS-8 |
52-11/16" to 64-11/16" |
|
| LS-9 |
64-11/16" to 76-11/16" |
|
| LS-10 |
76-11/16" to 88-11/16" |
|
| LS-11 |
86-11/16" to 98-11/16" |
|
| LS-12 |
98-11/16" to 110-11/16" |
|
|
|
|
|
|
|
|
|
SLAVE
CONNECTION KIT |
|
|
For
Slave Driving existing curves............... |
$226.20 |
|
|
(Please
Provide Sketch) |
|
|
|
|
|
|
GUARD
RAILS |
|
|
NOTE: Available in 5' and 10' lengths only from
Stockyard. Contact us for other lengths. |
|
|
Adjustable
Universal Channel Guard Rail |
|
|
Both Sides...........per
foot......................
One Side..............per foot..................... |
$15.10
$7.80 |
|
|
|
|
|
|
Angle
Type
Types "A" or "B" available (specify)
Prices are for both sides |
|
|
|
|
|
|
Type
"A"
1" x 1" x 12 Ga...............per foot........... |
|
|
|
$7.80 |
|
|
|
|
|
|
Type
"B" (See Note)
1" x 1" x 12 Ga.............. per foot........... |
|
|
|
$9.20 |
|
|
|
|
|
|
Fixed
Channel Type
(Prices are for both sides.)
2-1/2" x 1" x 12 Ga........ per foot........... |
|
|
*Less
than 18" top of roller elevation- Side Mounted
Drive Required. |
|
|
|
|
$15.00 |
|
|
|
|
|
|
*NOTE: If product comes in contact with guard rails,
product flow will be affected. |
|
NOTE: LS-7 to LS-12: Knee Braces included in price. |
|
|
| Extra
Knee Braces........... per pair............... |
|
$30.00 |
|
|
|
|
|
|
|
REPLACEMENT
BEDS |
|
|
|
|
|
|
|
| LOW
ELEVATION |
|
|
Intermediate
Beds - When ordering replacement
intermediate bed sections, use per foot price of
appropriate bed width shown in price chart.
Tail Bed - When ordering replacement tail bed
sections, add an additional................................$538.90 |
Low
Elevation Sheave Retainer Bracket to provide
9-1/2" elevation.
(Side mounted drive required. See Optional Drives.) |
|
|
| Add-on
per Sheave Retainer Bracket............. |
$167.60 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| POSITIVE
DRIVE |
|
PACKAGE
STOPS |
(Add-on
per foot of conveyor)
1-1/2" roller centers .......................................$88.70 |
|
Angle
End Stop
1-1/2" x 1-1/2" x12 Ga. Steel
10" to 22" Between Rail Width................ |
|
|
|
|
$31.75 |
ABEC
PACKED SEALED BEARINGS
WITH 5/16" HEX SHAFTS |
|
|
|
|
Raised
Roller End Stops
2-1/8" Dia. Roller
10" to 22" Between Rail Width................ |
|
| Per
foot add-on |
|
|
|
|
|
$78.70 |
| Between Rail Width |
10" |
13" |
16" |
22" |
| Overall Frame Width |
12" |
15" |
18" |
24" |
Add Per Foot of
Conveyor 1-1/2" Ctrs. |
|
|
|
|
|
|
|
|
|
Hand
Operated Stop
(Blade or Roller Types, specify)
10" to 22" Between Rail Width................ |
|
|
|
$538.60 |
|
|
Air
Operated Linear Thruster Stop
(Pin, Roller or Blade Types, specify)
13" to 22" Between Rail Width................ |
|
|
|
|
|
| ELECTRICAL
CONTROLS |
|
|
|
|
|
$1,701.30 |
| See
below. |
|
|
|
|
|
|
|
|
NOTE: Filter Regulator Unit not supplied as standard.
Stops are supplied in NORMALLY DOWN position.
Can be supplied in Normally Up position - Specify. |
|
|
|
| GALVANIZING |
|
|
| Contact
us. |
|
|
|
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
| • CEILING HANGERS |
|
Ceiling
Hanger Brackets with (2) 5/8” dia. x 8’-0” long unplated
fully threaded rods ...................................................................... |
|
 |
$147.90 |
Ceiling
Hanger Brackets with (2) 5/8” dia. x 8’-0” long galvanized
fully threaded rods ....................................................................... |
|
| $176.60 |
Ceiling
Hanger Brackets with (2) 5/8” dia. x 10’-0” long unplated
fully
threaded rods................................................................................ |
|
| $218.40 |
| Ceiling
Hanger Brackets with (2) 5/8” dia. x 10’-0” long galvanized
fully threaded rods................................................................................. |
|
| $359.60 |
| Ceiling
Hanger Brackets with (2) 5/8” dia. x 12’-0” long unplated
fully threaded rods................................................................................. |
|
|
|
|
$362.60 |
|
Ceiling
Hanger Brackets with (2) 5/8” dia. x 12’-0” long galvanized
fully threaded rods.................................................................................. |
|
|
$419.40 |
|
Ceiling Hanger
Brackets, Less Rods Only .................................... |
$93.10 |
|
Extra Length Rods: |
|
|
(2) 8’-0”
long x 5/8” dia. unplated fully threaded rods .................. |
$54.20 |
|
(2) 8’-0”
long x 5/8” dia. galvanized fully threaded rods ............... |
$83.40 |
|
(2) 10’-0”
long x 5/8” dia. unplated fully threaded rods ................ |
$125.20 |
|
(2) 10’-0”
long x 5/8” dia. galvanized fully threaded rods ............. |
$266.30 |
|
(2) 12’-0”
long x 5/8” dia. unplated fully threaded rods ................ |
$269.60 |
|
(2) 12’-0”
long x 5/8” dia. galvanized fully threaded rods ............. |
$326.50 |
|
Hex Coupling Nuts
for Rods ......................................................... |
$4.90 |
|
Above
noted delivery times determined by delivery time of model ordered. |
|
|
|
| • POLY-TIER SUPPORTS |
 |
|
PRICES
FOR COMPLETE
SUPPORT INCLUDE: |
|
|
|
IMPORTANT
NOTES
• Check for Clearance
• Specify type of conveyor to be used.
• Use in place of LS or MS Supports only. |
|
•
Painted Steel Support Legs
• Adjustable Cross pipe Assembly
• Knee Braces (1 set per level of
conveyor)
• "U" Brackets
• Single Width Conveyor Only |
|
|
|
|
|
|
|
|
|
|
|
|
CAPACITY
DATA:
1500 lbs..............................................per cross pipe
4500 lbs..............................................per set of legs |
|
|
|
|
|
|
|
|
|
|
|
|
| (2) TIER POLY-TIER SUPPORTS |
36" |
|
42" |
|
48" |
|
54" |
|
60" |
|
66" |
|
72" |
|
78" |
|
84" |
|
90" |
|
96" |
|
102" |
|
108" |
|
114" |
|
120" |
|
|
|
| (3) TIER POLY-TIER SUPPORTS |
36" |
|
42" |
|
48" |
|
54" |
|
60" |
|
66" |
|
72" |
|
78" |
|
84" |
|
90" |
|
96" |
|
102" |
|
108" |
|
114" |
|
120" |
|
|
|
|
|
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
| MOTORS |
Extra
Motor Price for OTHER THAN: 1/2 HP–208/230/460/575 V–3 Ph.–60
Hz.–Totally Enclosed. Speed affects
horsepower requirements. |
|
H.P. REQ. |
TOTALLY ENCLOSED |
ENERGY EFFICIENT |
200/208/230/
460/575V
3 Ph.-60 Hz. |
115/230V
1 Ph.-60 Hz. |
230/460V
1 Ph.-60 Hz. |
575V
3 Ph.-60 Hz. |
| 1/2 |
N/C |
|
|
|
| 1 |
N/A |
|
|
|
| 2 |
N/A |
|
|
|
|
|
|
TC-250
TRAFFIC COP |
|
|
The
Traffic Cop controls product flow from one
conveyor onto another. It allows products from one
line of traffic to flow freely, without interference from
another converging line of traffic. This eliminates collision
of products which may cause damage and disrupt
product flow. Specify model, width and degree.
• 7 arm widths, aluminum
• Available in 30°, 45°, 60°, 90° & 180° applications.
Includes mounting hardware.
* 180° application - 10" minimum required between lines. |
|
|
|
|
|
 |
|
|
| Overall Frame Width |
12"
to 15" |
18"
to 24" |
| Price Each |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TURNING
WHEEL |
|
Turning
Wheels are used in converging 30° and 45° spur applications. Also
used at 90° (right angle) transfers where
Traffic Cops, Package Stops and other product flow controlling devices are
used. Wheel is mounted on adjustable
bracket to insure proper package orientation through transfer. Can be mounted
to slider bed or side channels of
powered and gravity conveyors - specify model where applicable. |
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
B-05568 Turning Wheel Assembly with 6" dia. wheel & mounting
hardware ............................................................................. $123.00 |
|
|
|
|
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
| ELECTRICAL
CONTROLS AND DRIVE SECTION |
|
|
|
|
MANUAL START
SWITCH or
SAFETY DISCONNECT |
|
 |
|
|
|
LIMIT
SWITCH, SINGLE POLE,
WITH NYLON ROLLER LEVER |
 |
|
|
|
|
| #032.1014......................................... |
$213.01 |
|
|
|
|
#033.2032
& #033.2072..................$555.67
Nema 4 |
"START-STOP",
Nema 1, One direction, 30
AMP, 3 Pole (Single or 3 phase) |
|
|
|
|
|
|
|
|
LIMIT
SWITCH, DOUBLE POLE,
WITH NYLON ROLLER LEVER |
|
 |
|
|
|
|
|
|
|
|
|
#033.2033&
#033.2072...................$332.11
Nema 4 |
|
REVERSING
DRUM SWITCH |
|
|
|
|
|
|
#032.103.......................................... |
$854.26 |
|
|
|
 |
|
|
|
|
|
|
|
|
"Fwd-Stop-Rev",
Nema 1, for 1-1/2 HP at
115 volts or 2 HP at 230 volts single phase,
or 2 HP max. three phase |
|
|
|
|
|
 |
PROXIMITY
SWITCH, INDUCTIVE,
(METAL SENSING) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#032.210.........................................$205.35
115 Volt AC, two wire with ground, 30mm dia.,
10mm range |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
FOOT
SWITCH WITH GUARD |
|
|
|
|
|
|
|
|
|
|
#032.211.........................................$243.09
24 Volt DC, two wire with ground, 30mm dia.,
10mm range |
|
#032.200........................................... $270.29
(Constant Pressure) "On-Off" type, Nema 1,
Pilot Control or 1 HP max. single phase. |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
PHOTO
EYE, ON-OFF TYPE |
 |
|
|
|
|
|
|
|
#EA-000005......................................$1,059.27
Banner Q45 Retro Reflective Photo Eye Kit
with timing module, reflector and mounting
brackets. Photo Eye output is one form C
type relay, Operating voltage
24-250VAC/12-250VDC |
|
POWER
CORD AND PLUG (20') |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
POWER
CORD WITH PLUG ONLY 20' LONG |
Model
No. |
Voltage |
HP
Rating |
Prices |
EA-039-1A |
115/1 |
1/2-3/4 |
|
EA-039-2A |
115/1 |
1 |
|
EA-039-3A |
115/1 |
1
1/2 |
|
EA-039-4A |
230/1 |
1/2-1 |
|
EA-039-5A |
230/1 |
1
1/2-2 |
|
EA-039-6A |
208-230/3 |
1/2-2 |
|
EA-039-7A |
460/3 |
1/2-2 |
|
|
POWER
CORD WITH PLUG 20' LONG WITH MANUAL
START SWITCH AND MOUNTING BRACKET |
Model
No. |
Voltage |
HP
Rating |
Prices |
EA-039-1B |
115/1 |
1/2-3/4 |
|
EA-039-2B |
115/1 |
1 |
|
EA-039-3B |
115/1 |
1
1/2 |
|
EA-039-4B |
230/1 |
1/2-1 |
|
EA-039-5B |
230/1 |
1
1/2-2 |
|
EA-039-6B |
208-230/3 |
1/2-2 |
|
EA-039-7B |
460/3 |
1/2-2 |
|
|
|
|
|
|
|
|
|
|
|
|
MOUNTING
BRACKETS FOR PHOTO
EYE #033.2122 |
|
|
|
|
B-05165...........................................$118.10 |
|
|
|
|
|
|
|
|
|
|
|
 |
AIR
PRESSURE SWITCH |
|
#094.191........................................$691.31
Nema 4 |
|
|
|
|
|
|
|
|
|
|
EMERG.
STOP PULL CORD SWITCH |
|
|
|
|
|
#032.285
with 032.2851 Turnbuckle
...........................................................$696.08
Nema 4 |
|
|
|
|
|
"RED"
EMERGENCY PULL CORD
CABLE AND MOUNTING HARDWARE |
|
|
|
|
|
#032.281...one
side.................$7.44 per / ft.
both
sides..............$15.87per
/ ft. |
|
|
|
|
|
EMERGENCY
PUSH BUTTON |
|
|
|
|
|
#032.284..........................................$279.61
Nema 4 |
|
|
|
|
|
|
|
|
PHOTO
EYE, 18MM DIA., DIFFUSED,
(PHOTO PROX.) 115 VOLT, LIGHT
OPERATE, 2-METER CABLE |
|
|
|
|
|
#032.2113
(100mm range, 3.94")....$1,066.27
#032.2116 (200mm range, 7.87")....$194.14
#033.218 (400mm range, 15.74")....$293.48 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTE:
PRICING LISTED NOT MOUNTED
OR WIRED |
|
|
|
|
"PHOTO
EYE, RETRO-REFLECTIVE,
(POLARIZED) 24 VOLT DC |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#033.2128
with 032.21122 Cable.....$239.09
#032.21122 (Cable Only)...................$72.37 |
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
CONTROLLER
PRICES |
|
|
|
AC VARIABLE SPEED CONTROLLER ONLY |
SINGLE PHASE CONTROLLER INPUT |
| Motor Size |
115 Volt |
208/230 Volt |
| 1/2 |
VSC-12-10 |
VSC-12-12 |
| Price |
$1,491.84 |
$1,189.37 |
| 1 |
VSC-12-11 |
VSC-12-13 |
| Price |
$1,724.27 |
|
| 2 |
N/A |
VSC-12-14 |
| Price |
~ |
|
THREE PHASE CONTROLLER INPUT |
| Motor Size |
208/230 Volt |
460 Volt |
575 Volt |
| 1/2 |
VSC-01-15 |
VSC-01-18 |
VSC-12-29 |
| Price |
|
|
|
| 1 |
VSC-01-16 |
VSC-01-19 |
VSC-12-29 |
| Price |
|
|
|
| 2 |
VSC-01-17 |
VSC01--20 |
VSC-12-30 |
| Price |
|
|
|
|
|
REPLACEMENT
INVERTER DUTY
ENERGY EFFICIENT MOTORS |
|
| HP |
Part No. |
Price |
| 1/2 |
032.351 230/460 |
|
| 1 |
032.353 230/460 |
|
| 2 |
032.355 230/460 |
|
| 1/2 |
032.3512 575 |
|
| 1 |
032.3532 575 |
|
| 2 |
032.3552 575 |
|
|
|
|
|
|
|
IMPORTANT
NOTES... |
|
|
• All above motors are 230 / 460 / 575 Volt, 3 Phase.
• All above V/S Drive Kits include NEMA 1 / IP30
Junction Box, Controller and Motor.
• Good for cycle rates of up to 15 cycles per minute, at
1/2 second ramp time, with a maximum speed of 250
FPM.
• Drawing No. DG-001146. |
|
|
|
|
|
OPTIONAL: Mounting and Wiring Add-On . . .
(mounted close to the motor) |
$675.20 |
|
|
|
|
|
|
|
| Brake
Relay Kit (EA-068A).............................. |
$542.68 |
|
|
• When AC Variable Speed Controller is used with a
Brake Motor, A Brake Relay Kit (EA-068A) is
required. Add an additional $542.68 for this option.) |
|
|
|
|
|
ELECTRONIC
CLUTCH BRAKE DRIVE PACKAGE |
| Part No. |
Description |
Price |
| EA-VSC-01-CB |
2 HP Electronic Clutch-Brake Kit |
$5,058.00 |
|
|
|
|
|
OPTIONAL: Mounting and Wiring Add-on .
(mounted close to the motor) |
$675.20 |
|
|
|
|
|
|
KIT INCLUDES |
|
|
|
| Part No. |
Description |
| VSC-01-20 |
AC Variable Speed Controller, 460 Volt, 3 Phase |
| 032.345 |
2 HP 460 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets |
|
|
|
|
|
IMPORTANT
NOTES |
|
• Good for cycle rates of up to 60 cycles per minute.
• 1/10 second Accel and Decel time, with 350 FPM
Maximum Speed.
• 230 or 460 Volt Only, Other Voltages, Contact us.
• Motor Cooling Blower is 115 Volt, 1 Phase, 60 Hz.
• Price Includes 5AC Reducer and #60 Chain and
Sprockets |
| Part No. |
Description |
| VSC-01-17 |
AC Variable Speed Controller, 230 Volt, 3 Phase |
| 032.345 |
2 HP 230 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets |
|
|
|
|
|
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Model No. of the item you wish
to purchase. |
|
|
|
|
|
|
|
 |
|
THIS
STARTER LISTING MEETS TYPE "2"
COORDINATION (Defined) |
|
|
|
An International
Electrotechnical Commission (IEC) term that means: “under short
circuit
conditions, the starter shall cause no danger to persons or installation
and shall be
suitable for further use.” The only allowable damage to the starter
is light contact burning
or tack welding, provided the contacts are separable. Starters meeting
this level of com-
ponent protection provides users with less down time and lower replacement
costs. |
|
|
|
|
|
THREE PHASE, IEC COMBINATION MAGNETIC STARTERS |
H.P. |
MOTOR
DUTY |
NON-REVERSING |
REVERSING |
208 VOLT |
230 VOLT |
460 VOLT |
575 VOLT |
PRICE |
208 VOLT |
230 VOLT |
460 VOLT |
575 VOLT |
PRICE |
1/2 |
STANDARD EASY
CLEAN ENERG. EFF. |
|
|
|
|
$1516.60 |
|
|
|
|
$2,023.30 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
STANDARD EASY CLEAN
ENERG. EFF. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1-1/2 |
GEARMOTORS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 |
STANDARD EASY CLEAN
ENERG. EFF. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SINGLE PHASE, IEC COMBINATION MAGNETIC STARTERS |
H.P. |
NON-REVERSING |
REVERSING |
NON-REVERSING |
REVERSING |
|
115 VOLT |
PRICE |
115 VOLT |
PRICE |
230 VOLT |
PRICE |
230 VOLT |
PRICE |
1/2 |
|
$1,182.40 |
|
$2,023.30 |
|
$1,435.60 |
|
$2,023.30 |
1 |
|
|
|
|
1-1/2 |
|
|
|
|
2 |
|
|
|
|
|
|
|
|
|
|
|
|
| •
Manual Start-Stop Switch Kit |
|
•
Start-Stop Push Button Kit, Remote Mounted |
|
EA-000001 ...................................... |
$242.09 |
|
|
EA-000002....................................... |
$242.09 |
|
Includes:
032.1014 Manual Start Switch, Nema 1,
B-21467 Mounting Bracket with Mounting Hardware |
|
|
Includes:
033.1955 Push Button Station, One
Direction, Nema1, B-21467 Mounting Bracket
with Mounting Hardware |
|
|
|
|
|
• Forward-Reverse-Stop Push Button Kit,
Remote Mounted |
|
|
|
|
|
|
|
•
Up-Down-Stop Push Button Kit, Remote
Mounted |
|
EA-000003....................................... |
$440.67 |
|
|
Includes: 033.1965 Push Button Station, Reversing,
Nema1, B-21467 Mounting Bracket with Mounting
Hardware |
|
|
EA-000004....................................... |
$440.67 |
|
|
|
Includes: 033.1975 Up Down Stop Push Button
Station, Reversing, Nema 1, B-21467 Mounting
Bracket with Mounting Hardware |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
|
|
|
|
| •
“Start-Stop” Push-button Station |
|
•
“Start-Stop”Push-button Station |
033.1955
|
$211.23 |
|
|
033.195................................................. |
$142.50 |
| Remote
mounted, Nema 1 |
|
|
To
be mounted in Mag Starter Cover |
|
|
|
|
|
|
|
|
| •
“Fwd-Rev-Stop” Push-button Station |
|
•
“Fwd-Rev-Stop”Push Button Station |
| 033.1965 |
$397.05 |
|
|
033.196.................................................. |
$490.95 |
| Remote
mounted, Nema 1 |
|
|
To
be mounted in Mag Starter Cover |
|
|
|
|
|
|
|
|
| •
“Up-Down-Stop” Push-button Station |
|
OPTIONAL
STARTER CONTROLS |
| 033.1975 |
$397.05 |
|
|
•
Auto Restart Control, 3 Phase, Non-Reversing |
| Remote
mounted, Nema 1 |
|
|
|
EA-011
............................................
Includes: Photo Eye (033.2122), Dual Time
Delay Module (033.2172), Combination
Magnetic Starter with extra Contactor
(033.160), and a Control Circuit
Transformer (As Required), & Pushbutton
Station (033.195).
|
$3,210.68 |
|
|
|
|
|
|
|
|
|
|
|
|
|
IMPORTANT
NOTES |
|
|
|
• Control Circuit Transformer Included for 115 Volt
Control Voltage.
• Above starters are in Nema 3, 4 and 12 Enclosures.
• The starters included Safety Disconnect, Overload
Relay, and Aux. Contacts as required.
• IF AN ORDER IS SUPPLIED LESS MOTOR,
AND IS SUPPLYING ANY ELECTRICAL
CONTROLS, THEN MOTOR HP, VOLTAGE,
PHASE, AND FULL LOAD CURRENT MUST BE
STATED ON THE ORDER.
• PRICING LISTED IS NOT MOUNTED OR WIRED. |
|
|
|
|
|
|
|
|
•
Auto Restart Control, 1 Phase, Non-Reversing |
|
|
EA-012
(115 Volt) ...........................
EA-017 (230 Volt) ...........................
Includes: Photo Eye (033.2122), Dual
Time Delay Module (033.2172),
Combination Magnetic Starter with extra
Contactor (033.160), Pushbutton Station
(033.195), and (230 V. Only) a Control
Circuit Transformer (As Required).
Note: Above Price does NOT include
Photo Eye Mounting Bracket. |
$3,253.63 |
|
|
$3,391.27 |
|
|
|
| • Add on |
$192.70 |
for
the above Push Buttons |
|
|
|
| to
be Mounted. |
|
|
|
| • Add on |
$995.10 |
for
the above Starters and |
|
|
|
Push
Button Stations to be Mounted and Wired.
Supply 20'0" of cable for push button only. |
|
|
|
|
|
|
|
|
•
Mounting Brackets for photo eye |
|
|
|
|
|
|
|
|
|
|
|
#033.2122
B-05165 .............................................. |
|
|
|
|
|
|
|
$118.10 |
| SIZE TO ORDER Overall Length "A" |
Between Rail Width |
10" |
13" |
16" |
22" |
| Overall Frame Width |
12" |
15" |
18" |
24" |
| 5' |
Weights
(Lbs.)
Weights
Based on
1 1/2" Roller
Centers |
214 |
231 |
249 |
284 |
| 10' |
337 |
369 |
402 |
466 |
| 15' |
461 |
507 |
555 |
648 |
| 20' |
584 |
645 |
708 |
830 |
| 25' |
708 |
783 |
861 |
1012 |
| 30' |
831 |
931 |
1014 |
1194 |
| 35' |
955 |
1059 |
1167 |
1376 |
| 40' |
1078 |
1197 |
1320 |
1558 |
| 45' |
1202 |
1335 |
1473 |
1740 |
| 50' |
1325 |
1473 |
1626 |
1922 |
| 55' |
1449 |
1611 |
1779 |
2104 |
| 60' |
1572 |
1749 |
1932 |
2286 |
| 65' |
1696 |
1887 |
2085 |
2468 |
| 70' |
1819 |
2025 |
2238 |
2650 |
| 75' |
1943 |
2163 |
2391 |
2832 |
| 80' |
2066 |
2301 |
2544 |
3014 |
| 85' |
2190 |
2439 |
2697 |
3196 |
| 90' |
2313 |
2577 |
2850 |
3378 |
| 95' |
2437 |
2715 |
3003 |
3560 |
| 100' |
2560 |
2863 |
3156 |
3742 |
|
|
| All
weights are conveyor weights only. Accessories, crating, etc., are not included. |
|
Accessories,
crating, etc., are not included.
NOTE: Intermediate
bed sections are available in multiples of 4 ft., 5 ft., 6 ft., 7 1/2 ft.,
8 ft., and 10 ft. lengths only. |
|
Accumulating Conveyor, Conveyor,
Live Roller Conveyors, Powered Live Roller, Power Conveyor, Conveyors,
and Roller Conveyors from your source for material handling equipment. |
Back
to Product Category |
 |
|