FS Industries ENGINEERED STEEL PRODUCTS
Priced Full Line Products Catalog
20 Technology Way West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401) 421-5679
Home Order Search Quote Contact Us About Us My Account Shopping Cart
Back to Product Category

EWS SERIES SAFETY BALANCERS

safety balncers

The EWS Series Balancers offer true zero gravity, with no drifting or strain.
Tapered drum, quality springs and bearings provides smooth cable travel
throughout the stroke. This model combines the smaller capacity EW series
balancers with the safety features of the larger EWF` series balancers. The
EWS series has a manual drum lock which allows for easy change out of
tools and fall arrest device. Tension adjustment is performed easily with
a wrench. Additionally,the casing is fully enclosed, eliminating any potential
pinch points around the drum. Other features:

• Tension Adjustment is Easy and Precise
• Cast aluminum case
• Forged steel swivel hook.
• Exclusive 18 month warranty
Choose an EWS balancer based upon the total weight to be balanced (tool
and all accessories) and stroke requirements. Try to utilize the upper range
of the EWS capacity ratings.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


PRICES
Model No. Capacity Range (lb) Cable Travel (ft) Cable Dia. (in) Wt (lb) Prices
EWS-3 3.3 to 6.6 4.27 0.12 4.2
$371
EWS-5 6.6 to 11 4.27 0.12 4.6
$389
EWS-7 11 to 15.4 4.27 0.12 4.6
$460
Balancers Safety Features
Fall Arrest System
Drum Lock System
tool balancers
Prevents tool from drop-
ping in the unlikely event
that a spring breaks
Available to lock the
spool while replacing
a tool
Worm Gear System
Plug-in Cable Set
Turn clockwise to increase
tension, counter-clockwise
to decrease tension
For easy cable replacement
FOR DIMENSIONS SEE CHART ABOVE
Advantages of Using an ENDO Spring Balancer:
Features and Benefits
• Suspend tools in assembly lines or other work areas
• Help the assembler with repetitive tasks such as
   installing fasteners: screws, nuts, bolts, etc.
• Hold fixtures, tools, welding guns, and similar
   equipment
• Improves efficiency and diminishes worker fatigue
• Stabilizes tool positioning and contributes to work
   accuracy
• Contributes to a safer working environment
• Keeps fixtures, tools, and welding guns off of the floor
   and clean.
• Eliminates the need to separately power the balancer
ENDO Spring Balancers are a valuable addition to
your assembly line. They support heavy tools with
cable tension equal to the weight of the suspended
tools, which makes them seem virtually "weightless".
As the tool is repositioned the balancer extends or
retracts the support cable to follow the tool's movements.
Constant tension on the cable is accomplished with a
spring motor and a tapered drum. The assembler has
the flexibility to reposition the tool, while experiencing
comfortable operation and less fatigue. Similar to a
Balancer is the Retractor, which does not have a
tapered drum. The tension on the cable increases
as the cable is extended.
Application Guidelines
• Size the balancer to carry the total weight to be balanced - tool plus all accessories - and stroke (maximum to
   minimum height) required.
• Size to the upper end of the capacity range of the balancer when possible.
• Always attach secondary support cable(s) to the eyelet provided for additional safety.
• Balancers are normally hung vertically and the rope is pulled out vertically. To prevent the rope from wearing on the
   guide, the rope should not be pulled out at an angle to the balancer body. The balancer can also be mounted
   horizontally, however a pulley system must be employed to guide the rope straight out of the balancer then down to
   the tool. Again, care must be taken to prevent the rope from wearing on the guide. A trolley and rail system can be
   used to help the balancer adjust to changing angles.
• If multiple balancers are used in close together, install them at staggered heights to keep them from hitting each other
• The spring tension is factory preset to the mid-range of the rated capacity. To adjust the tension turn the worm gear
   or spindle clockwise to increase the tension and counterclockwise to decrease the tension.

Safety Balancers, Safety Retractors, Tool Balancer, Spring Retractor, Balancer, Tool Positioner, Smaller Capacity
Balancer, Light Capacity Retractor, Fall Arrest System Balancers, and Zero Gravity Tool Balancer from your source
for material handling equipment.
Back to Product Category
Visa - MasterCard - AMEX
Home - Order - Search - Quote - Contact Us - About Us - My Account - Shopping Cart