 |
ENGINEERED
STEEL PRODUCTS |
| Priced
Full Line Products Catalog |
20
Technology Way • West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401)
421-5679 |
|
|
|
|
Back to Product Category
ETP
SERIES HIGH CAPACITY BALANCERS
|
|
 |
|
The
ETP high capacity balancers offer true zero gravity, with no drifting or
strain.
Tapered drum, quality springs and bearings provides smooth cable travel
through-
out the stroke. The ETP Series is used for welding guns, large impact wrenches,
and other heavy tools. All high capacity ETP balancers include the fall
arrest
device (auto-brake). |
|
|
|
|
|
When
choosing a balancer, selection is based upon the total weight to be balanced
(tool and all accessories) and stroke requirements. Try to utilize the upper
range
of the capacity ratings. |
|
|
|
|
|
|
• Tension
adjustment is easy and precise.
• Cast aluminum case
• Forged Steel Swivel Hook.
• Exclusive 18 month warranty. |
|
|
|
|
|
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Model No. of the item you wish
to purchase. |
|
|
|
| PRICES FOR ETP SERIES |
| Model No. |
Capacity
Range (lb) |
Cable
Travel (ft) |
Cable
Dia. (in) |
Wt (lb) |
Prices |
| ETP-14 |
264.6 to
308.6 |
3.94 |
0.24 |
53.1 |
$3,856.25 |
| ETP-15 |
308.6 to
374.8 |
3.94 |
0.24 |
63.3 |
$4,468.85 |
| ETP-16 |
374.8 to
440.9 |
3.94 |
0.24 |
65.5 |
$4,740.87 |
|
|
 |
|
|
|
Balancers
Safety Features |
|
|
|
|
|
|
|
|
|
|
|
Fall Arrest
System |
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
Prevents tool
from
dropping in the unlikely
event that a spring breaks |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Worm Gear
System |
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
Turn
clockwise to increase
tension, counter-clockwise
to decrease tension |
|
|
|
|
|
|
|
FOR DIMENSIONS
SEE CHART ABOVE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
and Benefits |
|
Advantages
of Using an ENDO Spring Balancer: |
ENDO
Spring Balancers are a valuable addition to
your assembly line. They support heavy tools with
cable tension equal to the weight of the suspended
tools, which makes them seem virtually "weightless".
As the tool is repositioned the balancer extends or
retracts the support cable to follow the tool's move-
ments. Constant tension on the cable is accomplished
with a spring motor and a tapered drum. The assembler
has the flexibility to reposition the tool, while experiencing
comfortable operation and less fatigue. Similar to a
Balancer is the Retractor, which does not have a
tapered drum. The tension on the cable increases as
the cable is extended |
|
•
Suspend tools in assembly lines or other work areas
• Help the assembler with repetitive tasks such as
installing fasteners: screws, nuts, bolts, etc.
• Hold fixtures, tools, welding guns, and similar
equipment
• Improves efficiency and diminishes worker fatigue
• Stabilizes tool positioning and contributes to work
accuracy
• Contributes to a safer working environment
• Keeps fixtures, tools, and welding guns off of the floor
and clean.
• Eliminates the need to separately power the balancer |
|
|
|
|
|
|
|
|
|
Application
Guidelines |
•
Size the balancer to carry the total weight to be balanced - tool plus all
accessories - and stroke (maximum to
minimum height) required.
• Size to the upper end of the capacity range of the balancer when
possible.
• Always attach secondary support cable(s) to the eyelet provided for
additional safety.
• Balancers are normally hung vertically and the rope is pulled out
vertically. To prevent the rope from wearing on the
guide, the rope should not be pulled out at an angle to the
balancer body. The balancer can also be mounted
horizontally, however a pulley system must be employed to guide
the rope straight out of the balancer then down to
the tool. Again, care must be taken to prevent the rope from
wearing on the guide. A trolley and rail system can be
used to help the balancer adjust to changing angles.
• If multiple balancers are used in close together, install them at
staggered heights to keep them from hitting each other
• The spring tension is factory preset to the mid-range of the rated
capacity. To adjust the tension turn the worm gear
or spindle clockwise to increase the tension and counterclockwise
to decrease the tension. |
|
High Capacity Balancers,
Tool Balancers, Spring Balancer, High Capacity Retractor, Zero Gravity
High Capacity
Balancers, Tool Positioner, Heavy Duty Balancers, Fall Arrest System Balancers,
and Spring Retractors from your
source for material handling equipment. |
Back
to Product Category |
 |
|