FS Industries ENGINEERED STEEL PRODUCTS
Priced Full Line Products Catalog
20 Technology Way West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401) 421-5679
Home Order Search Quote Contact Us About Us My Account Shopping Cart
Back to Product Category

EASY ARM™
INTELLIGENT LIFTING ARM

CAPACITIES 165 LB. AND 330 LB.
easy arm intelligent lifting arm
g-force

INTELLIGENT ERGONOMIC LIFTING

G-Force® and Easy Arm™ devices are part of an exciting new family
of material handling equipment know as Intelligent Assist Devices
(IAD's). They use exclusive patented technology and an industrial
processor controlled servo drive systems to deliver unmatched lifting
precision and speed. Their fusion of advanced technology and basic
human guidance maximizes productivity while minimizing the risk of
injury to the operator.
MAN MEETS MACHINE
G-Force® technology fills the void between traditional lifting devices
and completely automated robotic solutions. These devices use the
human's intelligence and adaptability for guidance but the work is done
by the device.
easy arm intelligent lifting arm
G-FORCE® AND EASY ARM™ TECHNOLOGY:
THE SMARTER WAY TO LIFT
INFINITE SPEED CONTROL THE SAFE ALTERNATIVE
The G-Force® and Easy Arm™ move with the operator.
They move as fast or as slow as the operator chooses
to move. They are ideal for applications that require high
speed at some points in the cycle and slow, precise
movements at other points.
Operators want to use the G-Force® and Easy Arm™
because they’re easy to learn and easy to use. They are
safer than manual lifting and dramatically reduce worker
injury cost.
Anti-Recoil Technology
Blazing Speeds This prevents the G-Force® or Easy Arm™ from moving
or recoiling when there is a sudden change in load, reducing
the risk of potentially serious injury.
With G-Force® speeds reaching 200 fpm (61 mpm)
and Easy Arm™ speeds reaching 180 fpm (55 mpm),
these devices travel up to 4 times faster than traditional
high-end lifting devices currently on the market, making
them the fastest, most precise lifting devices on the planet.
Capacity overload
The unit will not lift if the load exceeds the rated capacity
of the G-Force® or Easy Arm™.
Pinpoint Precision
Power Loss Protection
The G-Force® and Easy Arm™ deliver unparalleled
precision with speeds of less than 1 fpm (0.3 mpm). This
gives the operator the control necessary to finesse
expensive or fragile parts.
A fail safe load braking system locks the unit in place in
the event of a power loss.
Operator Present Function
The handle grip of the G-Force® and Easy Arm™ uses
a built-in photo sensor that doesn't’t allow the unit to move
unless the operator initiates the movement.
THE SMART INVESTMENT
G-Force® technology makes your work force more
productive by increasing their efficiency and enabling
them to perform complex tasks. The G-Force® and the
Easy Arm™ are more cost effective than completely
robotic solutions and they don’t require the costly
custom programming that robots need to perform
even the simplest tasks.
Float Mode Option
Both the G-Force® and Easy Arm™ offer our versatile
Float Mode. With a mere 1/2 lb (227 g) of force on the
load itself, operators can precisely orient loads throughout
the full stroke range by manipulating the load with their
hands.
THE PERFECT SOLUTION
The G-Force® and Easy Arm™ give you the best of both worlds: the responsiveness and flexibility of a human
operator plus the power of a machine. And, they incorporate a range of speeds, making them perfect
for quick, repetitive motions and slow, precise placements.

g-force

G-FORCE® Q AND IQ BRIDGE CRANE MOUNTED
INTELLIGENT LIFTING DEVICE

When precision, strength and speed are necessities, turn to G-Force® Intelligent
Lifting Device. More precise than hoists, more responsive than air balancers, our
bridge crane mounted G-Force® units improve safety, productivity and quality,
resulting in a direct increase to your bottom line.
CHOOSE THIS CONFIGURATION FOR:
• Higher capacities: available in 165 LB, 330 LB and 660 LB capacities
• Faster speeds: maximum speeds up to 200 fpm
• More responsive performance: faster acceleration and deceleration
• Covering multiple work cells with one G-Force®
• Covering larger single work areas
APPLICATIONS
• Automotive assembly (engines, transmissions, chassis components)
• Heavy equipment manufacturing
• Tool & Die changeouts
• Natural Gas & Oil Industry (valves, drilling components, etc)
• Repetitive lifting jobs
• Parts assembly
• Machining
• Process equipment maintenance
g-force
G-FORCE® IN ACTION: AUTOMOTIVE
END-USER:
A major automobile manufacturer and parts supplier.
APPLICATION:
Convertible car tops measuring 4’ x 6’ and weighing 200 lbs are
being moved from a conveyor to a pallet lift for inspection, then
taken away.
WHY G-FORCE?
They had been using a two-speed chain hoist with a maximum
speed of 16 feet-per-minute. “The assembly line was running faster
than the workers could offload the product with the chain hoist,”
said the line supervisor. With speeds up to 200 feet-per-minute,
the G-Force® Q is able to perform as fast as the operators
can move, and gives them complete control of their load.
RESULTS:
The speed that operators are able to work, and the frequency
of loads they are able to handle, has greatly increased. Workers
are able to consistently match the assembly line’s output of 22
units per hour.

EASY ARM™ Q AND IQ INTELLIGENT
LIFTING ARM

easy arm q and iq intelligent lifting arm
The Easy Arm™ Intelligent Lifting Arm is an ideal solution if
you’re looking for a turnkey, plug and play lifting solution.
You get all the strength, precision, and speed of our patented
G-Force® lifting technology and processor controlled electric
servo drive system in the body of an ergonomic articulating
jib crane.
CHOOSE FREE STANDING FOR:
• Easy installation: the unit ships assembled and ready to be
   installed
• No foundation required
• Smaller work areas that require 14’ spans or less
• Capacities of 165 LB and 330 LB
• Easy relocation: the Easy Arm ™ is simply bolted to the floor
CHOOSE UNDER HUNG FOR: APPLICATIONS:
• Saving valuable floor space
• Hook heights over 11’
• Covering multiple work cells
• Reaching into a work cell or around obstructions
• Reaching under overhead obstructions like conveyors or exhaust
   hoods
• Reaching into machines
• High cycle pick and place
• Loading/unloading machined parts
EASY ARM™ IN ACTION: MANUFACTURING easy arm
END-USER:
Pressure Technology of Ohio
APPLICATION:
Raw materials weighing up to 250 lbs are loaded into a furnace
for heat treatment. During an average shift, an operator may
move up to 600 parts.
WHY EASY ARM?
They had been using an overhead crane system and chain hoist,
but this was slow and bulky. It was also shared throughout the
facility, so operators tended to move parts by hand rather than
using the hoist, which concerned the company. The 330 LB
Easy Arm™ was perfect for the job, and they didn't
have to share it.
RESULTS:
“We are very pleased with the easy arm™,” said pressure
technology’s plant Manager. “We are able to get precise part
placement using float mode, and it’s been a very easy piece of
equipment to integrate into the workplace. Since we installed the
easy arm™, we have eliminated many of our concerns related
to product handling.”
ADDED INTELLIGENCE FEATURES
g-force
There are two G-Force® and Easy Arm™ models to
choose from: the Q and the iQ. The Q model is our
feature packed base model. It offers the same speed
and precision as our higher-end IQ model, but without
the added Input/Output features that the IQ offers.
The IQ model offers a wealth of additional intelligence
features.
The Q and the IQ may look the same on the outside,
but under their covers is a different story.
FEATURE COMPARISON Q IQ
Teachable Virtual Limits and Speed Reduction Points Available
as a
software
adder
Standard
Virtual limits are specific points in the lifting range where the G-Force® and Easy Arm™ can be
programmed to stop or change speeds. Set speed reduction points a few inches above or below
a desired location when handling a fragile load. When the operator reaches that point, the units
automatically shift to a lower programmed speed and then stop in the desired spot for controlled
positioning every time.
Programmable Inputs and Outputs N/A Standard
The IQ unit comes standard with 8 Input/Output points in the actuator. Standard "out of box"
common functions like an additional set of virtual limits and a maintenance indicator are already
assigned to the Input/Output points to reduce the need for custom programming. Flexible and
convenient optional Input/Output blocks, each containing 8 Input/Output points, can be added
below the G360™ Swivel Assembly to provide just the right functionality for your application.
This block includes standard functions such as Auto-Home, Dual Weight Float Mode, and Anti-Drop.
Other Features N/A Standard
The IQ allows you to control one G-Force® or Easy Arm™ unit with two handles, which is ideal
for applications when tooling requires more than one point of control.
You can also control two
G-Force® units with one handle, which is useful when you want two points of control for large tooling.

optional pendant control handle SOFT TOUCH CONTROL HANDLES
MAKE TOOLING INTEGRATION EASIER
soft touch control handles Use our Soft Touch Control Handles
to control any air or electric powered
equipment, such as end-effector tooling
for the G-Force® or Easy Arm™. A
common handle base for air or electric
applications gives you design
commonality and flexibility, whether
your application requires air valves for
direct control of end tooling, or electric
switches to activate your G-Force®
or Easy Arm™ IQ inputs.
Why choose a Soft touch
Control handle?
• Flexible design easily integrates into
   new equipment layouts
• Easy replacement of any standard
   pneumatic or electric handles
• Engineered for easy use to reduce
   potential for fatigue and repetitive
   stress injuries
• Offers more flexibility in tooling
   choices and the ability to customize
   tooling for applications
• Costs less than most comparable
   handles

G-FORCE® AND EASY ARM™ Q AND IQ
HANDLE CONFIGURATION OPTIONS
g-force and easy arm q and iq handle
The G-Force® and Easy Arm™ were designed to
provide flexibility in handle configurations. Choose
from the following four configurations to best fit your
application.
in-line slide handle In-Line Slide handle
The in-line slide handle allows the
operator to get close to the load for
more control and precision. With
this handle, the load moves with the
motion of the operator’s hand.
remote mount slide handle Remote Mount Slide Handle
This configuration offers the same
smooth control as the slide handle,
but accommodates set-ups where the
operators can’t be close to the load.
suspendant pendant control handle Suspended Pendant Control Handle
This handle is ideal when you
have limited headroom, when
the operator can’t get close to
the load or when the operator
needs maximum lifting stroke.
This handle can also be used
when you expect the load to
bounce or tip during lifting.
INNOVATIVE HANDLE DESIGN
1. G 360™ Swivel Assembly
The G-Force® and Easy Arm™ have a combined
collector/air swivel that allows the handle to continuously
rotate without damaging electrical conductors in the coil
cord or optional air coil. This is ideal in applications
where the operator is continuously rotating the handle.
remote mount pendant control handle Remote Mount Pendant
Control Handle
2. LCD Display
Backlit display on the handle allows for menu style set up
of features like Virtual Limits and Speed Reduction
Points. It also communicates valuable information like
operation modes, weight, readout, diagnostic information,
and fault codes.
Choose this design when the
handle is mounted more than
one foot from where the wire
rope attaches to tooling, or when
you expect the load to bounce
or tip during lifting.
3. Operator Present Function
The handle grip of the G-Force® or Easy Arm™ uses a built in
photo sensor, making it safe and intuitive. This method senses
the presence of the operator’s hand without a physical lever to
depress. The result is safe, smooth operation because the
operator is not tempted to use the Operator Present Sensor safety
feature as a start/stop control.
4. Ergonomic Handle Design
Our long lasting handle was designed with your operator’s
comfort in mind. Its shape, size, and material were carefully
planned to fit comfortably in the curve of your hand, while its
rubber, textured coating gives you a positive grip.

G-FORCE® Q AND IQ
BRIDGE CRANE MOUNTED LIFTING DEVICE

g-force q and iq bridge crane mounted lifting device g-force q and iq bridge crane mounted lifting device
CAPACITY 165 lb 330 lb 660 lb
A 8.625" 10.25" 10.25"
B 14.375" 15" 15"
C 10.875 10.875" 10.875"
D 24.125" 24.125" 24.125"
E 23" 25.25" 25.25"
F 16" 16" 16"
D reference the coil cord in full upright positions.
G-FORCE™ Q AND IQ HANDLE CONFIGURATION OPTIONS
DIMENSIONS Remote Slide Suspended Pendant Remote Pendant
D 15.5" 5.875" 15.5"
F 14.25" 14.375" 14.375"
Remote Mount
Slide Handle
Suspended Pendant
Control Handle
Remote Mount
Pendant Control Handle
g-force handles

EASY ARM™ Q AND IQ
FREE STANDING LIFTING DEVICE

easy-arm
baseplate
Arm Rotation:
355° primary arm, 320° secondary arm
Capacity: 165 lb Unit
Span 6' 8' 10' 12' 14' 6' 8' 10' 12' 14' 6' 8' 10' 12' 14'
HUH 6' 8' 10'
OAH 109.14" 133.14" 157.14"
A 33.84" 45.12" 56.40" 67.68" 78.96" 33.84" 45.12" 56.40" 67.68" 78.96" 33.84" 45.12" 56.40" 67.68" 78.96"
B 105.98" 129.98" 153.98"
C 97.89" 121.89" 145.89"
D 24.90" 32.06" 40.03" 48.00" 56" 24.90" 32.06" 40.03" 48.00" 56" 24.90" 32.06" 40.03" 48.00" 56"
Capacity: 330 lb Unit
Span 6' 8' 10' 12' 14' 6' 8' 10' 12' 14' 6' 8' 10' 12' 14'
HUH 6' 8' 10'
OAH 109.88" 133.88" 157.88"
A 33.84" 45.12" 56.40" 67.68" 78.96" 33.84" 45.12" 56.40" 67.68" 78.96" 33.84" 45.12" 56.40" 67.68" 78.96"
B 106.86" 130.86" 154.86"
C 97.77" 121.77" 145.77"
D 24.34" 32.26" 42.70" 51.48" 59.76" 24.34" 32.26" 42.70" 51.48" 59.76" 24.34" 32.26" 42.70" 51.48" 59.76"
Please Note:
These dimensions are for Easy Arm™ units with Inline slide handles only. Units with suspended pendant handles will have
different dimensions.
portable base

G-FORCE® AND EASY ARM™ Q AND IQ
TECHNOLOGY: PROVEN PERFORMANCE

G-FORCE® AND EASY ARM™ Q AND IQ
TOOLING EXAMPLES
ERGONOMIC STUDY EASE OF TOOLING INTEGRATION
The following summary is based on a study performed by the
Rochester Institute of Technology. The study compared
the performance of G-Force® Intelligent Lifting Device to
other lifting devices. It focused on High Cycle Applications
and Precision Placement Applications.
The G-Force® and Easy Arm™ units were designed
with tooling integration in mind. Optional handle
auxiliary control brackets allow pneumatic valves
or electric switches to be integrated with the
G-Force® control handles. Choose one of these
three handle configurations to meet the needs
of your applications.
High Cycle Test
TOOLING EXAMPLES:
Operators were:
• 124% more productive
   with the G-Force® than
   with air balancers
• 74% more productive with
   the G-Force® than with
   variable frequency drive
   hoists
easy arm functions
* Manual: 75% of the
   subjects could not complete
   10 minutes of lifting & still
   maintain safe heart rates.
Precision Placement Test
Operators were:
• 76% more productive with
   the G-Force® than with air
   balancers
• 59% more productive with
   the G-Force® than with
   variable frequency drive
   hoists
* Manual: None of the
   subjects could complete
   10 minutes of lifting w/o
   exceeding safe heart rates.
Force of Placement
The G-Force® was:
• 2.5x less likely to damage
   the load than the air
   balancer with pendant
   control
• 3.3x less likely to damage
   the load than the variable
   frequency drive hoists
• 2.2x less likely to damage
   the load than manual

G-FORCE® Q AND IQ TECHNOLOGY TECHNICAL SPECIFICATIONS
Bridge Mounted G-Force® Q and IQ Quick Facts
  Q IQ Q IQ Q IQ
Maximum Capacity (Load & Tool) 165 lb 330 lb 600 lb
Maximum Lifting Speed Unloaded 200 ft/min 100 ft/min 50 ft/min
Maximum Lifting Speed Fully Loaded 125 ft/min 75 ft/min 42 ft/min
Maximum Float Mode (Option) Lifting Speed 103 ft/min 65 ft/min 38 ft/min
Maximum Lift Range 11 ft 11 ft 11 ft
Maximum Lift Stroke 8 ft 8 ft 8 ft
Free Standing Easy Arm™ Q and IQ Quick Facts
Easy Arm™ Q IQ Q IQ
Maximum Capacity (Load & Tool) 165 lb 330 lb
Maximum Lifting Speed Unloaded 180 ft/min 90 ft/min
Maximum Lifting Speed Fully Loaded 125 ft/min 75 ft/min
Maximum Float Mode (Option) Lifting Speed 103 ft/min 65 ft/min
Maximum Lift Range 11 ft 11 ft
Maximum Lift Stroke 8 ft 8 ft
G-Force®/Easy Arm™ Q and IQ Technical Specs IQ Specific Information
G-Force® Easy Arm Q IQ
Primary Lift Voltage 220 +/- 10%
Maximum Current (Amps) 10
Duty Cycle H5
Operating Temperature Range 41 - 122° F
Operating Humidity Range
(Non-Condensing)
35 - 90%
Power Available for Tooling Not Available 24VDC @0.5A
Virtual Limits (Upper, Limit,
Power Limit, Speed Reduction)
Optional Standard
I/O Actuator (IQ Only) IQ
Number of Inputs, Type 8, Sinking
Input Current @ 24 VDC 6ma
Number of Outputs, Type 8, FET
Continuous Current/Channel (Amps) 0.5
Module Maximum Current (Amps) 0.5
Handle with I/O Module (IQ Only) IQ
Number of Inputs, Type 8, Sinking
Input Current @ 24 VDC 4ma
Number of Outputs, Type 8, FET
Continuous Current/Channel (Amps) 0.5
Module Maximum Current (Amps) 0.5

Now Available:
1320 lb./600 kg Capacity G-Force®
1320 lb./600 kg Q IQ
Maximum Capacity (Load & Tool) 1320 lb
Maximum Lifting Speed Unloaded 25 fpm
Maximum Lifting Speed Fully Loaded 21 fpm
Maximum Float Mode Lifting Speed 19 fpm
Maximum Lift Range 5.5 ft
Maximum Lift Stroke 5.5 ft.
Infinite Speed Control: The G-Force® moves with the
motion of the operator, going as fast or as slow as the
operator chooses to move. It is ideal for heavy lifting
applications that require high speed at some points in the
cycle and slow, precise movements at other points.
Pinpoint Precision: The G-Force® delivers unparalleled
precision throughout its full range of speed. This gives the
operator the control necessary to finesse expensive or
fragile parts.
Safety Features: Anti-Recoil Technology, Capacity
Overload, Power Loss Protection, Operator Present
Function
Float Mode Option: As with all other G-Force® models,
the 1320 lb. capacity unit can be equipped with Float
Mode. With Float Mode engaged, operators can apply
a very slight amount of force onto the load itself to
precisely orient loads with both hands throughout the full
stroke range.
“There was a definite ‘wow factor’ the first time we saw the G-Force. Everyone
who touched it was amazed with the ability to float such large parts.”
g-force in action As business grew for hydraulic cylinder manufacturer Best
Metal Products, so did the size of their product. As a producer
of cylinders for use in large cranes, mining equipment and man
lifts, they saw demand for heavier duty cylinders increase. The
result was their existing products nearly doubling in size and
weight.
“We were regularly making cylinders that were topping out at
around 600 pounds,” said Matt Malfroid, Quality & Training
Supervisor for Best Metal Products. “Now we expanded our
product offering to include cylinders that weigh more than
1,000 pounds. We didn’t have a safe way to lift them.”
After examining chain hoists as an option, they sought a lifting
device that gave operators more control and maneuverability
when handling the large cylinders. After a G-Force® demonstration
with the company’s work force, they found that the best solution
was right in their hands.
They purchased a 1320 lb/600 kg G-Force® with a magnetic
end effector to grip and move the cylinders.
“Control is the big thing,” said one operator. “Once I lock onto
the part with the magnet, I can lift it, rotate it or put it in float
mode to position it onto the clamp exactly where it needs to be.”
handle configurations on a g-force
Dimensions In-Line Slide Handle Remote Slide Remote Pendant Suspended Pendant
A 10 1/4" 10 1/4" 10 1/4" 10 1/4"
B 15 1/2" 15 1/2" 15 1/2" 15 1/2"
C 16" 16" 16" 16"
D 29" minimum 20" minimum 20" minimum 16" minimum
E 25 3/4" 25 3/4" 25 3/4" 25 3/4"
F 19 1/2" 13" 13 1/2" 13 1/2"

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


PRICING FOR FREE STANDING EASY ARM™
Capacity Height
Under
Hook
Span Series Model Number Shipping
Weight
(lbs.)
Price Series Model Number Shipping
Weight
(lbs.)
Price
165# 6' 6' Q 629
$26,080
IQ 629
$33,018
8' 644
$26,684
644
$33,593
10' 756
$27,757
756
$34,618
12' 853
$28,358
853
$35,193
14' 889
$28,959
889
$35,766
8' 6' 674
$26,833
674
$33,737
8' 689
$27,434
689
$34,311
10' 877
$28,512
877
$35,335
12' 898
$29,110
898
$35,911
14' 934
$29,712
934
$36,483
10' 6' 798
$27,585
798
$34,454
8' 889
$28,186
889
$35,028
10' 922
$29,264
922
$36,055
12' 943
$29,863
943
$36,628
14' 979
$30,464
979
$37,201
330# 6' 6' 837
$32,247
837
$40,934
8' 855
$32,998
855
$41,649
10' 1018
$34,342
1018
$42,935
12' 1055
$35,094
1055
$43,648
14' 1080
$35,844
1080
$44,367
8' 6' 904
$33,187
904
$41,833
8' 922
$33,940
922
$42,547
10' 1085
$35,281
1085
$43,833
12' 1122
$36,033
1122
$44,550
14' 1147
$36,785
1147
$45,267
10' 6' 1050
$34,128
1050
$42,730
8' 1068
$34,877
1068
$43,447
10' 1152
$36,225
1152
$44,732
12' 1189
$36,973
1189
$45,449
14' 1214
$37,724
1214
$46,164

PRICE INCLUDES:
easy arm drawing
Jib boom, jib arm, pivot assemblies, friction brakes on both
pivots, leveling adjustment assembly for boom, G-Force™
lifting device assembly, handle, and Free Standing mast
assembly (anchor bolts available, but not included) in an
enclosed shipping container.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


PRICING FOR UNDER HUNG EASY ARM™
Capacity Span Series Float Mode Model Number Shipping
Weight
Price
165# 6' Q Yes 534#
$27,507
8' 551#
$28,108
10' 567#
$29,181
6' iQ Yes 534#
$34,380
8' 551#
$34,953
10' 567#
$35,977
under hung easy arm drawing PRICE INCLUDES:
Jib boom, jib arm, pivot assemblies, friction brake
on secondary pivot, rotation stop, G-Force® lifting
device assembly, and handle in an enclosed shipping
container.
NOT INCLUDED:
Mounting hardware.
The Under Hung Easy Arm™ is designed to be
mounted to a platform using eight (8) M16 x 2.0mm
pitch hex head cap screws and lockwashers. The
fastener length should allow for the lockwasher
thickness, the mounting plate thickness, and a
minimum of one inch insertion into the tapped holes
of the Easy Arm™. A class 10.9 fastener
(or better) is required.

Foundation Notes: To purchase an Free Standing Easy Arm™,
please complete the following part number:
• When mounting the Free Standing Easy Arm™,
   the baseplate must have the following clearance
   from walls, expansion joints and any cracks in
   the floor:
free standing easy arm part number
• Units with a 6’ or 8’ span require a 48 square
   inch area around the baseplate
• Units with a 10’ or 11' span require a 60 square
   inch area around the baseplate
• The jib must be mounted to a 6” reinforced
   concrete floor based on 3000 psi concrete
   pressure and soil pressure of 2500 psf
Rotation Limit Notes:
• The Free Standing Easy Arm™ has the following
   rotation limits:
• The Primary Arm of 330# capacity units has a
   rotation limit of 345 degrees
• The Primary Arm of 165# capacity units has a
   rotation limit of 335 degrees
• The Secondary Arm of all units has a rotation limit
   of 325 degrees

Rotation Limit Notes: To purchase an Under Hung Easy Arm™, please complete
the following part number:
• The Easy Arm™ has the following
   rotation limits:
under hung easy arm part number
• The Primary Arm on all units has a
   rotation limit of 335 degrees
• The Secondary Arm of all units has a
   rotation limit of 325 degrees
• Continuous rotation is available with
   optional collector
under hung easy arm part number
Application Notes:
• When sizing the Under Hung Easy Arm™, it is
   critical to select the optimal span for your
   application. As with any crane system, choose the
   minimum span needed to maximize ease of
   movement
• Wire rope length can be adjusted from standard to
   accommodate platform height

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Price of the item you wish to purchase.


Easy Arm™ Handle Options
Pricing and Configurations
remote mount slide handle
remote mount slide handle Remote Mount Slide Handle
This configuration offers the same
smooth control as the slide handle,
but accommodates set-ups where the
operators can’t be close to the load.
Suffix Details Price
Adder


- RSH
• For Mounting Handle on Lifting Tool

$1,246.60
• Call us for lengths greater than 6.5' (2 m)
• Must provide the factory with length from the coil
   cord to the handle when ordering

suspended pendant control handle suspended pendant control handle Suspended Pendant Control Handle
This handle is ideal when you have limited
headroom, when the operator can’t get close
the load or when the operator needs maximum
lifting stroke. This handle can also be used
when you expect the load to bounce or tip
during lifting.
Suffix Details Price
Adder
-SPH Used when a pendant station configuration is
    required
Allows operator to use more of the available lifting
    stroke
$347.00 (165-660#)
$800.80 (1320#)
/PVS • Single pilot valve (or part number 74380)
/PVD • Dual pilot valve - single valves mounted to each side
  (or part number 74381)
/CSS
Single control switch (or part number 74390)
/CSD • Dual control switch - single switches mounted to each
  side (or part number 74391)
/PVCS • Single pilot valve on one side and single control switch
  on the opposite side (or part number 74395)
For levers other than up and down, indicate
on order desired lever engraving up to
7 characters.
Pilot valves and switches are assembled to the pendant handle if handle and
components are ordered together.

Part Number Example: For a 330# iQ Easy Arm™ with a 6' span, 8' height under hook,
suspended pendant control handle and single pilot valve, use the following
part number:
EA-F-330-6-8-IQ-N-Y-SPH/PVS

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Price of the item you wish to purchase.


remote mount pendant control handle remote mount pendant control handle Remote Mount Pendant Control Handle
Choose this design when the handle is mounted
more than one foot from where the wire rope
attaches to tooling, or when you expect the load
to bounce or tip during lifting.
Suffix Details Price
Adder

 

- RPH

• For mounting handle on lifting tool

 

$1,246.60

• Used when tooling is too large or unstable to use the
   remote mount slide handle
• Must provide factory with length from coil cord to the
   handle when ordering
• Call us for lengths greater than 2 m (6.5')
Part Number Example: For a 330# IQ Free Standing
Easy Arm™ with a 6' span, 8' height under hook,
remote mount pendant control handle and dual
control switch, use the following part number:
EA-F-330-6-8-iQ-N-Y-RPH/CSD
See Suffixes under Suspended Pendant Handle to add pilot
valves and control switches.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


Optional Accessories
(Pricing is in addition to Easy Arm™ Base Price)
handle brackets
Model
Number
Description Price
Remote Mount Handle Bracket - used for mounting
a slide handle to end tooling when tooling does not
mount to the slide handle at both top and bottom.
Also provides a means of mounting auxiliary pneumatic
or electric control levers to a remote mounted slide handle
$181.60
In-Line Slide Handle Auxiliary Control Bracket -
provides a means of mounting auxiliary pneumatic
or electric control levers to an in-line slide handle
$159.40
Remote Mount Handle Clamp Collars
Model Number Description Price
70125 7/8" Inner Diameter Clamp Collar
$121.00
70126 1" Inner Diameter Clamp Collar
$121.00
70127 1-1/4" Inner Diameter Clamp Collar
$135.20
70128 1-5/8" Inner Diameter Clamp Collar
$169.40
remote mount handle clamp collars
Collar clamp mounting plate used to secure Easy Arm™ remote
mount slide (with optional remote mount handle bracket not included)
or remote mount pendant handle to tooling frames constructed of
round tube.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Price of the item you wish to purchase.


latch hook
Suffix Description Price Adder
- LH Safety Latch Hook $286.40
In applications where the operator is required to open the safety
latch to release the load, the latch hook option may create a
finger-crushing hazard. When the operator is required to open
the safety latch with the Easy Arm™ turned on, the latch assembly
may be removed to avoid finger-crushing.
Can be ordered separately from Easy Arm™ using part number
74199 price of $286.40

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Price of the item you wish to purchase.


Portable base models in gray have an (S) after the plate thickness.
These models use steel plate portable bases.
Portable base models in white have a (C) after the plate thickness.
These models use steel tubs that must be filled with concrete (not included).
HUH Capacity 165#
Span 6' 8' 10' 12' - 14' 6' - 14'
6' Model
Number
PB-54-12 PB-60-12 PB-60-15 PRTBSE.610A PRTBSE.610
Price
Square
Length
54" 60" 60" 72" 72"
Thickness 1.25" (S) 1.25" (S) 1.5" (S) 12" (C) 12" (C)
Shipping
Weight
1,098# 1,363# 1,617# 1,098# 889#
8' Model
Number
PB-54-12 PB-60-12 PRTBSE.6010A PRTBSE.610A PRTBSE.610
Price
Square
Length
54" 60" 72" 72" 72"
Thickness 1.25" (S) 1.25" (S) 12" (C) 12" (C) 12" (C)
Shipping
Weight
1,098# 1,363# 889# 889# 889#
10' Model
Number
PB-54-12 PRTBSE.610A PRTBSE.610A PRTBSE.610A PRTBSE.610
Price
Square
Length
54" 72" 72" 72" 72"
Thickness 1.25" (S) 12" (C) 12" (C) 12" (C) 12" (C)
Shipping
Weight
1,098# 889# 889# 889# 889#
For PB-54-12, PB-60-12 and
PB-60-15, fork pocket dimensions
= 7-1/4" inside width, 3-1/2" inside
depth, and 20-1/2" from centerline
to centerline.
For PRTBSE.610A and
PRTBSE.610, fork pocket
dimensions = 12" inside width,
4" inside depth, and 29" from
centerling to centerline.
Price Includes: fork pockets, leveling feet and mast mounting hardware

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


anchor bolts
Model Number Description Price ea.
3/4" x 7" Anchor Bolt with nut and washer*
$8.07
1" x 9" Anchor Bolt with nut and washer**
$28.20
* (4) anchor bolts are required for square base plate. (6) anchor bolts are
required for hex base plate.
** (6) anchor bolts are required (330# units only).
electrical collector
Model Number Description Price Adder
82292 Electrical Collector $1,359.60
4 ring collector with mounting bracket.
Includes 4 ring collector, collector cover, slip ring bracket, slip ring
shaft (welded to primary arm), 4 conductor #14 AWG cable from
Easy Arm™ up through slip ring shaft.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Price of the item you wish to purchase.


g360 collector
Part No. Details Price
- CI G360™ Collector for Inline Slide Handle
- CR Standalone G360™ Collector for
Remote Mount Applications
Suffix Option Details Price
Adder
- AH Air Hose • Includes upgrade to integrated air hose in coil cord $976.33
(Free Standing)
• Routes air from bottom of mast to bottom end of coil cord
• 1/2" male NPT input for Free Standing Easy Arm™ or 1/2" female NPT input
  for Under Hung Easy Arm™
$1,042.90
(UnderHung)
• Customer is responsible for air supply to input and any necessary fittings
- T Transformer Free Standing $1,571.40
(Free Standing)
• Includes Transformer mounted to Easy Arm™ mast
• For 110VAC input, 10' long input cord with 110VAC plug included
• For 460VAC input, customer must wire directly to transformer input
$976.33
(UnderHung)
Under Hung
• Easy Arm™ will accept any of the following single phase AC input voltages:
  208, 220, 230 or 240 VAC without transformer
• For other voltages, this option is necessary
• Transformer must be wired by customer - wiring is not included with
   transformer

Easy Arm, Intelligent Lifting Arm, 3, Cranes, Articulating Jib Cranes, Gorbel Jib Cranes, Jib Cranes, Floor Mounted Jib Cranes,
Gorbel Cranes, Hoist, and Jib Booms from your source for material handling equipment.
Back to Product Category
Visa - MasterCard - AMEX
Home - Order - Search - Quote - Contact Us - About Us - My Account - Shopping Cart