 |
ENGINEERED
STEEL PRODUCTS |
| Priced
Full Line Products Catalog |
20
Technology Way • West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401)
421-5679 |
|
|
|
|
Back
to Product Category
DOUBLE
AUTO ATTENDANT WASTE CONTAINER |
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Price of the item you wish to
purchase. |
|
|
 |
|
|
|
|
|
|
Double
Auto Attendant concrete trash receptacle
with cast aluminum top and 18 gal. liner. Wash units
and towel dispensers on both sides. Includes security
cable. ADA compliant design. Add your logos or
recycling decals to customize. Choose the colors of
both the top and container.
Size: 21" x 38" x 33 3/4"
Unit Weight: 660 lbs
Unit Capacity: 20 Gallons
Reinforcing: 1/4" Dia. steel rebar
Material: Concrete, Aluminum
Logo Options: Inkjet or cast in place
Anchoring: Includes (4) 1/2" threaded inserts on
bottom for optional anchoring. |
|
|
|
|
|
|
 |
|
|
Model:
TF1242
Price: $1,120.00 (Std. Colors) |
|
|
|
|
(2)
Wash & Towel Holder Included |
|
Model:
TF1242-P
Price: $1,344.00 (Premium Acid Wash Stain) |
|
|
|
|
 |
|
 |
|
| Concrete
Specification |
|
1.1
SUMMARY
A. Section includes: Furnish Precast
Concrete indicated on drawing or specified herein.
1.2 REFERENCES
A. American Society for Testing &
Material
1. ASTM
C33 2. ASTM C150 3.ASTM C31
1.5 SUBMITTALS
A. Submit Product data,shop drawings and samples.
1. Product Data:
Manufacturer’s specifications and technical data edited specifically
for proposed system,
including the following specific Information:
a:
Detailed specification of construction fabrication.
b:
Manufacture’s installation instructions
c:
Maintenance literature
d:
Product warranty
2. Shop Drawings:
Indicate pertinent dimensions, general construction, component connections
anchoring
methods, hardware and installation procedures.
3. Samples as
requested by Architect.
1.6 QUALITY ASSURANCE
A. Qualifications of Manufacture: Manufacturer
to be prequalified by specifier prior to bidding. Failure to comply
will result
in disqualification of bid. Manufacturer to have at least five years experience
in the manufacture of
precast concrete
field proven for at least five years.
1.10 WARRANTY
Manufacturer shall submit
a written warranty for precast products for the period of two years upon
acceptance.
2.1 MANUFACTURERS
A. Clarification Note: Drawings and
installation specification are based on manufactures proprietary literature
from us. Other
manufacturers shall comply with minimum levels of material and detailing
indicated on
drawings of specified
herein.
B. All Precast products for this project
shall be of one manufacturer.
2.2 MATERIALS
A. Portland cement: ASTM C150 specifications
for Portland cement.
B. Aggregates: All aggregates to meet
ASTM C33 specifications, to be cleaned of foreign matter and properly
graded to size.
C. Coloring: Pigments used shall be
inorganic, resistant to alkalinity and used as per manufacturers
recommendations. |
|
TECHNICAL
INFORMATION - POWDURA® Epoxy Powder Coating |
|
PRODUCT
DESCRIPTION
EAS6-00025
ZINC RICH PRIMER
POWDURA® Epoxy Powder Coating is recommended for a broad range
of interior functional and
decorative applications.
APPLICATION
Cure Schedule: 10 min @ 205°C (401°F)
Film Thickness Range: 1.5-1.8 mils
ATTRIBUTES
Specific Gravity: 2.83 +/-0.05
Coverage at 1.0 mil: 67.8 sq.ft/lb
60 Gloss: Visual
Adhesion: No Failure with 1/16in. squares(5B) (ASTM D-3359)
Flexibility: Pass 1/8" Mandrel Bend (ASTM D-522)
Pencil Hardness: H-2H (ASTM D-3363)
Impact Resistance(dir/rev): 160/160 (ASTM D-2794)
Other Notes
SaltSpray Performance: When top coated with TGIC polyesters,urethanes
and fluoroploymers, testing showed
4-5 mm undercut at 5000 hours on Bonderite 1000
Storage:
POWDURA® Powder Coatings should be kept in a dry and cool area at
temperatures below 80°F (26.7° C).
Shelf life is approximately 12 months.
When not in use, store powder in sealed containers: fine powders are hygroscopic.
Substrate Preparation
General: Substrate should be free of grease, oil, dirt, fingerprints,
drawing compounds, any contamination, and
surface preparation treatments to ensure optimum adhesion and coating
performance properties. The use of a
chemical conversion coating prior to the application of a powder coating
is strongly recommended. Consult Metal
Preparation Brochure CC-T1 for additional details.
Aluminum: A minimum of a 5-stage chrome phosphate metal treatment, or
equivalent, is required for good adhesion
and optimum coating performance properties.
Testing:
Due to the wide variety of substrates, surface preparation methods, application
methods, and environments,
the customer should test the complete system for adhesion and compatibility
prior to full-scale application.
The properties listed are typical and should not be construed as the actual
specification.
Product Limitations:
Contact your Sherwin-Williams Representative where use of this product
at higher than recommended film
thickness may be required.
APPLICATION:
Powder coatings must be applied using suitable electrostatic equipment.
Consult your Sherwin-Williams
Representative regarding unique applications.
CAUTIONS:
Thoroughly review product label for safety and cautions prior to using
this product. Please direct any questions
or comments to your local Sherwin-Williams facility.
CAUTION! Causes eye irritation, causes skin irritation, may cause
allergic skin reaction, respiratory irritant, dust
may cause eye and respiratory irritation, dust may form an explosive mixture
in air. Avoid breathing dust. Avoid
contact with eyes and prolonged or repeated contact with skin. Use protective
clothing and NIOSH approved
respirator. Do not use near sparks or open flame or any type of ignition
source. Wash thoroughly after handling.
Use only with adequate ventilation.
FIRST AID:
If on SKIN: Wash thoroughly with soap and water.
If in EYES: Flush with water immediately and procure medical attention.
The area adjacent to the coating operation
should be properly ventilated. Cure ovens must be exhausted to the outside
atmosphere. All dusts are respiratory
irritants, inhalation of the dust should be avoided. To avoid static electricity
buildup, properly ground all equipment.
Provide dust collection equipment with adequate explosion venting; dust
clouds of any finely divided organic material
can be ignited by open flame or electrical sparks.
DO NOT TAKE INTERNALLY. KEEP OUT OF REACH OF CHILDREN. FOR INDUSTRIAL
USE
ONLY. REFER TO MATERIAL SAFETY DATA SHEET FOR ADDITIONAL INFORMATION.
Note:
Product Data Sheets are periodically updated to reflect new information
relating to the product. It is important that the
customer obtain the most recent Product Data Sheet for the product being
used. The information, rating and opinions
stated above pertain to the material currently offered and represent the
results of tests believed to be reliable.
However, due to variations in customer handling and methods of application
which are not known or under our
control, The Sherwin-Williams Company cannot make any warranties or guaranties
as to the end results. |
|
Double Auto Attendant Waste
Container, Concrete Recycling Centers, Concrete Trash Receptacles, Concrete
Recycling Waste Receptacles, Trash Receptacles, Metal Trash Receptacles,
Steel Trash Receptacles, Weathergard, Polysteel, Streetscape, Aspen
Series, and American Series from your source for material handling equipment. |
Back
to Product Category |
 |
|
