Beam Clamp, Beam Clamps, Lifting Clamp, Lifting Clamps, Plate Clamp, Plate Clamps

Screwlok Beam Clamp With Shackle

	Screwlok Clamps Type SC92 Shackle Suspension

		Screwlok Beam Clamps are designed for attachment to the lower flanges of structural steel beams to provide a semi-permanent lifting point. The clamps can be quickly and easily attached via the screw type mechanism.

		Features:

		• Designed to fit flanges of most structural beams • Act as semi-permanent lifting point for use with manual or electric hoists • Shackle incorporated for quick and easy component attachment

	Clamps (Refer also to ANSI/ASME B30.20) • If not properly installed, operated, and maintained, the use of all mechanical equipment presents the possibility of personal injury or property damage. Before using lifting clamps, become familiar with applicable installation, operation and maintenance requirements. Clamps should be used only by authorized, properly trained operators. • Observing the following general precautions will guard against damage and injury: • Inspect clamps and equipment before use. Do not use if components are bent, elongated, gouged, nicked excessively, worn, or damaged. Make sure that nuts, bolts, pins and other fasteners are tightened and secure. Make sure clamps are functional and will grip the load. • Do not exceed the clamps' rated load or working load limit of other lifting equipment components. • Lift only one plate at a time when using lifting clamps. • Do not lift unbalanced loads. Avoid sudden jerks when applying the load. Rapid load application can produce overloading. • Use clamps and lifting equipment only if authorized and properly trained. • Always stand clear when lifting and lowering. • Use more than one clamp suspended from a lifting beam when lifting long loads. • Always gently lift and lower.

Screwlok Clamps Type SC92 Shackle Suspension Dimensions

Click the button of the item you wish to purchase.

Screwlok Clamps Type SC92 Shackle Suspension Prices


Twin Screwlok Clamp Type SC92T		Back to Previous

	Twin Beam Clamps enable one beam to be suspended beneath another beam. These clamps are designed for easy attachment and can only be used with a minimum of two suspension points.

	Features:

	• Enables one beam to be suspended beneath another • Quickly and easily attaches to both beams • Supplied fixed at parallel, at 90 degrees to each other or with swivel that allows for 360 degree rotation • Used for supporting vertical loads only

Click the button of the item you wish to purchase.

SC92T Twin Screwlok Clamp Prices

Screwlok Beam Clamp With Shackle