CG
Clamps can lift and turn girders through 90º and are designed
to meet the
requirements of the heavy steel industry. They are general purpose
clamps and
can be used on rolled steel joists, beams, and fabrications
up to a surface hardness
of 300 Brinell (32HRc).
Features:
•
Can be used on beams, fabrications, channels and rolled steel
joists
• Can lift and turn beams up to 90º and are designed
to land the beam in either the
vertical or horizontal position.
• Fitted with a cam/spring-operated safety lock
• Incorporates a positive lock onto one of the uppermost
edges, which will allow
the beam to be set down with the flange vertical
• For long girders, fabrications and welded structures,
two clamps and a lifting
beam may be required
Order Online
Click the button of the item you wish to purchase.
The
TTR clamps can be used on girders and rolled steel joists
up
to a surface hardness of 300 Brinell (32HRc). This range of
clamps
has been developed for handling structural beams with the flange
in
a vertical position, or "H" position. Girders can
be lifted and stacked
horizontally. The hook rings are designed to be as a near to
the center
of gravity as possible, resulting in a near horizontal lift.
For short
beams a single clamp can be used. For longer beams, two clamps
should be used in combination with a lifting beam. Various sizes
and
lifting capacities are available. The TTR is a versatile tool
for
transporting girders and joists. This clamp is fitted with a
cam
operated locking mechanism.
Features:
•
Used to lift and transport structural beams up to a
surface hardness of 300 Brinell (32HRc) with
the
flanges in the up right position
• Available in capacities up to 3 tons
• Jaw capacities available up to maximum of 1-1/8"
• Short beams may be lifted with a single clamp,
longer beams should use 2 clamps and a spreader
beam
• Repair centers available to service your products
• Replacement parts available for clamps
• No special tools required for repairs
Order Online
Click the button of the item you wish to purchase.
