The
1200 Series PowerReel ® is the best-built small
spring driven cord reel on the market today. These
are industrial grade, precision machines that will
provide years of service with little or no maintenance.
1200
Series Reels are ideal for:
• Assembly and fabrication work areas
• Truck crane control cables
• Automotive and truck work bays
• Conveyors and utility trucks
• Schools, theaters, and recreation centers
• Other mobile power applications
Standard
Features
• All-steel construction with fiberglass/nylon drum
• Durable yellow powder coated finish
• Standard versions: Ball stop only, receptacle box, incandescent
hand lamp, or fluorescent hand lamp
Each
1200 Reel includes:
• Cable: Refer to Table A (see below for chart) for the
types of
cable supplied.
• Adjustable cable guide arm: Can be placed at 12 possible
positions
to direct the cable where you need it. Includes
smooth-running 4
roller guide for minimum cable stress.
• Ratchet: Locks the spool to keep cable at the desired
extension.
Can be disengaged with a pull on the cable or completely
locked
out for "constant tension" (stretch) applications
• Adjustable ball stop: Limits cable retraction and prevents
damage
to cord end accessories.
• Precision slip ring assembly: Provides flawless contact
and long life.
• 6 foot feeder cord: Transfers incoming power to the reel.
Three
conductor reel feeder cords have a three-prong molded
plug.
• Safety chain hole: Attachment point for a safety chain
when the
reels are mounted overhead.
• UL and CSA Listed: See below for details
•
If the cable needs to payout at an angle, order a
Swing-Mount Bracket (#35787) separately:
If
the reel base needs to rotate, order
a Pivot Base. (PVB)
This
allows reels to rotate up to 345°
left-to-right. The unit bolts to the base
of the reel in the field.
1200
Series PowerReel® Features
The
1200 Series PowerReel® is built with a minimum of components
for maximum reliability. Unlike "consumer-
grade" cord reels, this reel has all the features you require
for tough industrial applications.
TABLE
A - CABLE TYPES USED ON 1200 SERIES REELS
AWG/#
of Conductors
110
or 300 Volt reels
600
Volt Reels
Cable
on Spool
Feeder
Cable
Cable
on Spool
16/3
Cables
SOOW-A
SJTOOW-A,
SJOOW or SJEOOW
SOOW-A
16/4
Cables
SOOW-A
SOOW-A
SOOW-A
14/3
Cables
SJEOOW-A
SJTOOW-A,
SJOOW or SJEOOW
SOOW-A
14/4
Cables
SJEOOW-A
SJEOOW-A
SOOW-A
12/3
Cables
SJOOW-A
SJTOOW-A
SOOW-A
12/4
Cables
SJOOW-A
SJOOW-A
SOOW-A
Reels With Ball Stop Only
This
reel can be used to power moving machinery or used by
hand use a customer-installed cable-end accessory. If the
accessory weighs over two pounds (0.9 kg), please contact
us. Reels come with ball stop and various cable types; see
Table A on below. Three-conductor 110 volt reels come with
six foot feeder cord and NEMA 2 molded plug. Four conductor
reels are rated NEMA 4 (IP56) for indoor or outdoor use. UL
and CSA Listed
(Note: Reels with customer installed components are NOT listed.)
Order Online
Click the button of the item you wish to purchase.
*110V
reels: Maximum voltage is restricted by the molded plug on the
feeder cord.
Reels With Receptacle Box
This
version of the 1200 Series PowerReel comes with a factory installed
receptacle box as noted below. Boxes are yellow, heavy-duty
molded TPE
(thermoplastic elastomer) - oil resistant and impervious to
most chemicals.
Includes internal cord grip. Reels include six-foot feeder cable
with molded
plug - rated NEMA 2 for indoor use. GFCI (Ground Fault Circuit
Interrupter)
models include the GFCI as part of the plug on the feeder cord.
#
RB: Dual
15 amp, 125 volt duplex
(four outlets total) - used on 16/3
and 14/3 cables
# RB-5-20R: Dual 20 amp, 125 volt
duplex (four outlets total) - used on
12/3 cable
GFCI
Option: The GFCI is
part of the plug on the end
of the feeder cord. These
reels have part numbers
ending in "17".
Order Online
Click the button of the item you wish to purchase.
This
1200 Series PowerReel comes with # HSR factory-installed incandescent
hand lamp when extra lighting is required for safety and convenience.
The lamp
has:
• High-impact yellow handle
• Recessed on/off switch
• 15 amp / 125 volt auxiliary outlet on the side.
• All-steel, grounded reflector cage and swivel hook
The lamp requires a 100 watt rough-service bulb - bulb not included.
UL Listed - for indoor use
Order Online
Click the button of the item you wish to purchase.
This
1200 Series PowerReel comes with # FHL factory-installed fluorescent
hand lamp when extra lighting is required for safety or convenience.
The lamp has:
• Yellow rubber handle
• Recessed on/off "bump switch" on the end
• Plastic non-glare shield with cool operating 13 watt
bulb included
• Feeder cord mounted ballast
• Double hanging hook
UL Listed, for indoor use
Order Online
Click the button of the item you wish to purchase.
Pivot
Bases allow the cable reel to pivot back and forth for alternating
directions of cable payout. See chart below for maximum rotation.
If
cable payout exceeds 150 away from parallel to the spool, a
pivot base
should be used.
Note
that "Swivel Bases" are available for applications
that require a
full 360° pivot. Pivot Bases are ordered based on the specific
series
of reel used:
Swivel
Bases allow reels to rotate 360 degrees in applications
where continuous electrical rotation is required. They feature
completely free running ball bearings in a water-tight and dust-
tight enclosure. Access holes are provided for simple slip ring
inspection. Hazardous duty version is available
Standard
top and side fittings: 1.0 inch NPT for cable diameters
ranging from 0.50 to 0.75 inches.
Contact
us regarding fittings for larger size cable.
Also
referred to as "Kellems" grips, these devices are
recommended to maximize cable life. They relieve the
concentrated strain on individual conductors at the
cable termination point. In most installations, the eye
of the cable grip is connected to an eye bolt or U-bolt.
This allows free movement between the cable and the
grip. Allow for generous cable loop to minimize the
strain on the cable.
•
Required for reels in "stretch" applications
• Suitable for all PowerReel® Cable Reels
The
Flop-Over Guide Kit consisting of a new guide arm
assembly, special hub, snap ring, and bearings. The kit
modifies the standard stationary guide arm to let it freely
pivot around the shaft hub. Ideal for overhead reels that
require a back and forth payout. For 1200 Series only.
PowerReel, Power
Reel, Conductix Wampfler Cable Reels, Cable Reel, Retractable
Cable Reel, Electric Cable Reel,
Heavy Duty Cable Reels, Steel Cable Reels, Indoor/Outdoor
Cable Reels, and Wet/Dry Cable Reels from your source
for material handling equipment.
