•
Disconnect switch.
• Automatic fan delay circuit.
• Automatic reset thermal limit.
• Powder coated 18 gauge steel grill with extruded Aluminum
front frame.
• Steel block fin element.
• Vane axial fan blade: 600 RPM motor; 175 CFM
• Rough-in dimensions: 14 1/8" Wide x 19 1/2"
High x 4" Deep
• Grill dimensions: 15 29/32" Wide x 20 27/32"
High
• Built-In tamper proof thermostat.
• Made in U.S.A.
Product
Specifications
Heavy-Duty
Forced Air wall heaters, where specified. The heaters shall
be constructed of a heavy 18 gauge steel
housing with an extruded Aluminum frame. The rough-in dimensions
are 14 1/8" Wide x 19 ½" High x 4" deep.
The units shall be available in ratings from 750 to 4800 Watts
at 240, 208, and 277 Volts. The heaters shall have
a low-speed 600 RPM, 4-pole motor which drives a vane axial
blower to deliver a quiet 175 CFM of down flow
air. The heating element shall be of the sealed tubular type
with large, parallel steel fins for quick heat transfer. Unit
shall have as a standard, a thermal overload cut-off for added
safety, fan delay switch and built-in tamper proof
thermostat which shall be calibrated to provide a range of 0°F.
to 110°F. and manual disconnect switch. Optional
accessories shall include a surface and semi-recess mounting
adapter. All heaters shall be listed by ETL. The heating
element shall be supplied with a manufacturer's 1-year limited
warranty.
Order Online
Click the button of the item you wish to purchase.
Commercial Fan
Forced Wall Heaters, Fan Forced Wall Heaters, Heaters, Radiant
Forced Heater, Electric Heater, Space Heaters,
Ceramic Fan Forced Heater, Radiant Forced Heater, Electric
Heater, Space Heaters, Portable Baseboard Heater, Ceramic
Heaters,
and Portable Fan Heaters from your source for material handling
equipment.
