OSHA
requires that all drums and containers storing and receiving
fluids with a FLASH POINT BELOW 140°F
be grounded and bonded. Single drums must be grounded, with
containers being dispensed into bonded to the drum.
Multiple drums must be bonded to each other with one drum or
the rack grounded. Wesco Ground and Bond wires
allow meeting these important safety requirements.
VENTS
Features:
•
Automatically relieves pressure at 5 PSI.
• Maximum flow of 220 CFM at 20 PSI.
• Flame arrestor prevents sparks and flame from igniting
drum contents.
• Fits 2" bung hole in steel and plastic drums.
Part#
272030
For drums in horizontal (pouring) position.
Manual vacuum relief by lifting and rotating valve stem. FM approved.
Minimum order Qty. 2.
GAUGES
Features:
•
Economical way to gauge drum contents.
• Heavy gauge glass and plated steel construction.
• Accepts standard .75" NPT faucet.
• Buna-N seals; .75" NPT connection, 22" height
(with
supplied fitting).
Part#
272005
Basic gauge with fitting.
Part# 272006
Basic gauge with fitting and 272080 faucet.
Part# 272041
Basic gauge with fitting and 272083 faucet.
GROUND AND BOND WIRES
Features:
•
A wide variety of designs for grounding and bonding
applications.
OSHA
requires that all drums and containers storing and
receiving fluids with a FLASHPOINT BELOW 140°F
be grounded and bonded. Single drums must be grounded,
with containers being dispensed into bonded to the drum.
Multiple drums must be bonded to each other with one
drum or the rack grounded. The following wires allow
meeting these important safety requirements.
Part#
272032
Deluxe Ground Wire: For connection between drum and
true ground. Three-foot-long heavy duty insulated wire
rope with "C" clamp on one end and alligator clip
on the
other. Minimum order Qty. 5.
Part#
272031
All Purpose Bond Wire: For bonding drums to each other,
to containers being filled, and to racks. Three-foot-long
heavy duty wire rope with "C" clamp on one end and
alligator clip on the other. Minimum order Qty. 5.
Part#
272033
Standard Bond Wire: For bonding drums to each other,
to containers being filled, and to racks. Three-foot-long
heavy duty wire rope with alligator clips on both ends.
Minimum order Qty. 5.
Order Online
Click the button of the item you wish to purchase.
•
Red polyethylene 4-quart funnel with 2" NPS
fitting to screw into bung opening.
• 9.625" opening.
• Equipped with black polyethylene lockable
cover and removable strainer screen.
Vertical Polyethylene
Pop-up Gauge
•
Pops up to indicate drum is almost full.
• Fits standard 3/4" – 14 NPS bung holes.
• Part #272216, Model # PUG-5 - 5" long.
Part #272217, Model # PUG-11 - 11" long.
• Closure cap.
Order Online
Click the button of the item you wish to purchase.
Drum Vents Gauges
& Wires, relieves pressure at 5 PSI, flame arrestor prevents
sparks and flame, fits 2" bung hole in steel & plastic
drums, for drums horizontal (pouring) position, manual vacuum
relief, gauge drum contents, heavy glass plated construction,
and
Ground Bond Wires from your source material handling equipment.
