60.5"
Bottom of 55-gal. drum
(Horizontal position)
55"
Bottom of 55-gal. drum
(Vertical position)
STANDARD
STRADDLE-TYPE MODELS
Centers
load between the wheels for maximum
balance and safety.
12.5"
Lowest position of rotator axis
6"
Leg top clearance
3"
Ground clearance
Roto-Lift's
compact size and single-post design provide a lift that is fully
operational in narrow aisles and limited
spaces. Choose from 78" or 90" overall height models.
Dimensions shown in green refer
to 90" model. See chart
below for actual lifting heights and other specifications. The
78" model fits under standard doorways. The 90" model
enables users to pour drum contents into containers as high
72". The Roto-Lift has 3 x 1.5" rigid and 4.5"
swivel
polyurethane wheels.
Operating
Dimensions & Specifications
78"
Model
90"
Top of 55-gal. drum (Vertical
position)
84.5"
Top of 55-gal. drum
(Horizontal position)
78"
Top of mast
72.5"
Highest position of
rotator axis
60.5"
Bottom of 55-gal. drum
(Horizontal position)
55"
Bottom of 55-gal. drum
(Vertical position)
The
Counterweighted Roto-Lift comes with 34
weights. Each weighs 13.5 lbs., for a total of 459 lbs.,
enough to safely lift and rotate an 800 lb. drum.
Because the counterweighted unit has only 4" legs,
no clearance is needed to pick a drum off of a pallet
or dump it into a secondary container. Like the
Roto-Lift, the counterweighted unit has a single-post
design for maximum visibility. The counterweighted
Roto-Lift has 5" rigid and 4.5" swivel polyurethane
wheels.
12.5"
Lowest position of rotator axis
6"
Leg top clearance
3"
Ground clearance
Note:
Counterweighted model weighs twice as much as straddle-type
models
and requires much more effort to move into position or to propel.
Ideal
for loading or unloading
pallets
Powered
Lift and Tilt Models
Choose
from battery-powered or air-powered
models. Both offer fully powered lifting and tilting.
The
battery-powered model requires a standard
12-volt deep cycle battery (not included), and plugs
into a standard grounded outlet to recharge.
The
air model is ideal for spark-resistant applications.
The model requires an outside air source.
Battery
or air-powered lifting.
Lifting speed 17 fpm.
Battery
or air-powered inverting,
rotating, and controlled dumping.
Manually
Powered Models
Both
the lifting and 360° rotating functions are
manually powered. Uses hydraulic foot pump for
lifting. Uses universal joint-equipped hand crank to
make the 360° rotation.
Note:
All models are manually propelled.
Manually
powered models to utilize
a foot-powered hydraulic pump for
lifting. Lifting speed 5 fpm.
Manual
crank offers quick, easy
360° rotating and controlled
dumping to either side.
Order Online
Click the button of the item you wish to purchase.
