TOP-OF-DOCK-LEVELERS
|
Hydraulic Surface Mounted Dock Levelers
|
|
|
|
|
 |
|
|
|
|
BENEFITS
|
|
|
|
|
 The
Top-Of-Dock is economical, allowing you
to improve loading dock efficiency at a
fraction
of the cost of pit-mounted dock levelers.
Initial
cost is low. Maintenance is reduced
to simple,
periodic lubrication and adjustment.
|
|
|
|
|
The
Top-Of-Dock is adaptable. A full 10" reach
above dock height is attainable. |
|
|
|
|
|
|
|
|
|
The
Top-Of-Dock is easy to install on virtually
any existing dock. No pit or other
expensive
concrete work is required. It requires
only 35"
back from dock edge.
|
 |
|
|
|
|
The
Top-Of-Dock is easy to operate for one man
using one hand - whether you choose mechanical
or hydraulic operation. |
|
|
|
The
Top-Of-Dock is stout. Face plate and lip are
high strength steel safety tread plate.
Precision
bearings are used at load points. To safely
accommodate a wide range of trailer heights,
full
18" high bumpers are standard equipment.
These
bumpers are molded of first quality rubber
and
secured to high strength 5/16" fully
welded
bumper blocks.
|
|
|
|
| HYDRAULIC
OPERATION |
|
|
|
Top-Of-Dock is
offered in your choice of a mechanically
or hydraulically operated model. With either model, you
can choose between 20,000 or 25,000 lb. capacity.
No matter which Top-Of-Dock you choose, you'll enjoy
years of smooth, dependable service and easy operation.
For hydraulically operated models, the operator simply
presses and holds the control button until the leveler
reaches the fully extended position. The operator then
releases the control button and the leveler automatically
lowers to create a good working level with the truck bed.
To retract and restore the leveler, the operator again
pushes the control button until the leveler lip clears the
trailer. Then upon release of the control button, the
leveler will smoothly descend into stored position.
Each of the twin hydraulic cylinders features an
adjustable descent control, eliminating the need for a
mechanical lip latch. This is an exclusive feature and
eliminates lip latch breakage.
|
|
|
|
| THE
TOP-OF-DOCK LEVELER |
|
|
Older
docks are typically below the 50" industry
standard height. The trailers bought by major trucking companies
match this industry standard. The Top-Of-
Dock has a 10" upward reach to provide a good
working level on low docks. That, plus the clear
superiority and rugged dependability of levelers, is
why Top-Of-Dock is the overwhelming choice of the
freight handling professionals, the major motor freight
companies, when they work at low docks. They use
the Top-Of-Dock more than all other brands and types
of surface-mounted levelers. |
|
|
|
|
|
|
| SIMPLE
INSTALLATION |
|
|
|
Top-Of-Dock
simply mounts to the top and edge of loading dock. In fact,
little or no change is required on an existing
dock. A pit is not needed. For very little expense, Top-Of-Dock
allows you to create and effective working height on
older docks. To reduce loading and unloading grades, it has
a generous 63" span. Deck width is 72". |
|
|
|
| ARCHITECTURAL
SPECIFICATIONS |
|
|
|
Top-Of-Dock
leveler to be fully-electric hydraulic push-button operated
with a ____________ lb. capacity, a 72"
deck width, a 15" lip, an 11" extension beyond bumpers,
and a 10" upward reach and a 63" total span. Unit
to have
two independently adjustable hydraulic cylinders, one on lip
and one on centerplate, for total hydraulic operation with
no mechanical lip latch. Unit to have 120V 1P totally enclosed
unitized pump motor and valve assembly with NEMA
12 push-button control. Unit to automatically return to stored
position after all operations. Unit to mount on top of
dock surface with no concrete pit forming required. Unit to
include two 12" x 14" x 18" molded rubber bumpers
secured to fully-welded 5/16" steel bumper blocks. Unit
to meet or exceed all applicable OSHA, ANSI and CS202
requirements. Unit to be Top-Of-Dock leveler model #__________. |
|
| OPTIONS |
|
|
|
|
|
 |
17" lip
for trailers with step sections
Rust inhibiting
primer paint
Pro-dock brown
paint (Machine Tool Gray
paint is standard)
Key lock operation
Floating bumper
block
|
|
|
|
|
 |
|
Click the button of the item you wish to purchase. Contact us for special lengths
|
| PRICES |
| Model
No |
Deck Width |
Total Unit Width |
20,000 CIR |
25,000 CIR |
30,000 CIR |
35,000 CIR |
|
HSM-5 |
72" |
110" |
|
|
|
|
|
Wt. |
1050# |
1075# |
1100# |
1125# |
|
Click the button of the item you wish to purchase. Contact us for special lengths
|
| Common
"EOD" Options |
|
Description |
Price |
|
17" Lip for Refrigerated Trailers |
|
|
U.S. Post Office Model with 3" Run Off Guards (HED
only) |
|
|
Tapered Lip (Tapered At Sides) |
|
|
Abrasive Deck Surface Over 4 Way |
|
|
Solid Bar Handle for NeverLift |
|
|
Extended Pipe Handle for Neverlift (Standard on 30k &
35k CIR) |
|
|
Low Profile Design (Flat Center Plate) Pallet-Jack Applications |
|
|
Stainless Steel Hinge Pins |
|
|
Cold Spray Metalized |
Consult
Us
|
|
Torsion Spring (Extension Mechanism) DL Series Only |
N/C
|
|
Extra Heavy Duty Sliding Bump Block Series Wall Mounting
Bracket (1 Pair) (in lieu of standard) |
|
|
Steel Face Bumpers (1 Pair) (in lieu of standard) |
|
| Laminated
Bumper Blocks (1 Pair, in lieu of standard) |
|
|
Special Paint |
Consult
Us
|
|
Grey Bump Blocks |
|
|
|
| Common
"EOD" Accessories |
|
Model No |
Description |
Price |
|
DL96 |
Dock Ladder 7"x16"x45" with 36" dual
grab bar built into ladder |
|
|
DL80 |
Dock Ladder 7"x16"x45" with single grab
bar (detached) |
|
|
DOTH9260 |
Trash Can Holders |
|
|
KIT3650 |
Safety Flag |
|
|
Click the button of the item you wish to purchase. Contact us for special lengths
|
| "EOD"
Installation Accessories |
|
|
Model No. |
Description |
Weight
|
Price
|
|
DOTH-3816
|
66"
Four-Sided Box Assembly |
235#
|
|
|
DOTH-3836
|
72"
Four-Sided Box Assembly |
250#
|
|
|
DOTH-3851
|
78"
Four-Sided Assembly |
265#
|
|
|
DOTH-3853
|
84"
Four-Sided Assembly |
300#
|
|
|
DOTH-9036
|
Embed
Channel 8" x 120" |
156#
|
|
|
DOTH-9040
|
Embed
Channel 10" x 120" |
175#
|
|
|
DOTH-9050
|
Ramp
Approach Plate 1/4"x12"x120" with 'Break',
includes Anchor Bolts |
170#
|
|
|
DOTH-9051
|
Ramp
Approach Plate 1/4"x18"x120" with 'Break',
includes Anchor Bolts |
226#
|
|
|
DOTH-9052
|
Ramp
Approach Plate 1/4"x24"x120" with 'Break',
includes Anchor Bolts |
338#
|
|
|
DOTH-9054
|
Ramp
Approach Plate 1/4"x36"x120" with 'Break',
includes Anchor Bolts |
164#
|
|
|
DOTH-9055
|
Ramp
Approach Plate 3/8"x12"x120" with 'Break',
includes Anchor Bolts |
246#
|
|
|
DOTH-9056
|
Ramp
Approach Plate 3/8"x18"x120" with 'Break',
includes Anchor Bolts |
327#
|
|
|
DOTH-9057
|
Ramp
Approach Plate 3/8"x24"x120" with 'Break',
includes Anchor Bolts |
612#
|
|
|
DOTH-9059
|
Ramp
Approach Plate 3/8"x36"x120" with 'Break',
includes Anchor Bolts |
897#
|
|
|
DOTH-9060
|
Ramp
Approach Plate 3/8"x48"x120" with 'Break',
includes Anchor Bolts |
900#
|
|
|
DOTH-9072
|
Face
Plate 1/4"x9"x120" with Anchor Bolts |
76#
|
|
|
DOTH-9073
|
Face
Plate 1/4"x12"x120" with Anchor Bolts |
102#
|
|
|
DOTH-9074
|
Face
Plate 1/4"x15"x120" with Anchor Bolts |
127#
|
|
|
DOTH-9066
|
Formed
Angle 1/4"x8"x10"x120" |
151#
|
|
|
DOTH-9067
|
Formed
Angle 1/4"x8"x10"x120" with Break |
151#
|
|
|
DOTH-9068
|
Formed
Angle 1/4"x12"x14"x120" |
217#
|
|
|
DOTH-9069
|
Formed
Angle 1/4"x12"x14"x120" with Break |
217#
|
|
|
DKIT-9915 |
Installation Kit-included (4) angles 1/4"x2"x2"x6
& 17 Anchor Bolts |
6#
|
|
|
DKIT-9914 |
TOD Install Kit |
|
|
|
DOTH-1003 |
Gray Touch Up Spray Paint |
|
|
|
DOTH-1004 |
Orange Touch Up Spray Paint |
|
|
|
DOTH-2079 |
Anchor Bolts 5/8"x5" (Round Heads) |
|
|
|
|
DLM, Dock Leveler,
Dock Levelers, Hydraulic Dock Levelers, Loading Dock Levelers,
Manual Dock Leveler, Manual Dock
Levelers, and Top-Of-Dock-Levelers from your complete source
for material handling equipment
|
|
