All Weather Molded One-Piece Fiberglass Composite Buildings
ALL
WEATHER MOLDED ONE-PIECE FIBERGLASS
COMPOSITE BUILDINGS
High
quality fiberglass composite buildings designed for all-weather,
year-round protection of your equipment and/or instrumentation.
Corrosion
resistant materials of construction for long life.
Molded
one-piece construction for high strength and
low cost.
Virtually
maintenance free.
Insulated
to reduce heating/cooling costs.
Light
weight for easy installation.
Numerous
sizes and optional equipment items are
available to meet your requirements.
Fast
delivery on many sizes.
APPLICATIONS
STANDARD
FEATURES/EQUIPMENT
All-weather,
molded one-piece fiberglass reinforced
polyester buildings are well suited to house and protect
equipment for a wide variety of applications such as:
Peaked
roof with two (2) cadmium plated lifting eyes.
Single
door (for models #EFC-72x___ -1 and
EFC-54x___-1),
insulated composite construction,
flush-fitting, 36" wide x 78" high (O.I.C.) - see
door
construction/hardware.
composite
construction, flush-fitting, 63" wide x
78" high
Pollution
monitoring equipment
Electronic
and communications equipment
(O.I.C.)
- see door construction/hardware.
Marine
and fire fighting equipment
White
color molded-in (painting not required). Insulated
with 1" thick, class 1, flame resistant, rigid foam. Internal
4" wide x 1/4" thick, integral fiberglass base mounting
Pumps,
motors and generators
Safety
showers
flange,
predrilled for 1/2" diameter anchor bolts.
CONSTRUCTION
Closed
cell neoprene rubber base mounting gasket.
Designed to withstand 120 MPH wind load and 30 PSF
roof load.
All-weather,
molded one-piece fiberglass reinforced
polyester buildings are fabricated of composite
construction consisting of:
Smooth
white isophthalic gelcoat finish containing U.V.
inhibitors on exterior surface.
DOOR
CONSTRUCTION/HARDWARE
Door
is fabricated of molded one-piece composite
construction (similar to walls and roof) with 1 1/2" thick,
class 1, flame resistant foam insulation.
Minimum
1/8" thick fiberglass reinforced polyester
laminate (minimum 30% glass content by weight) on
exterior surface.
Standard
single door (for models #EFC-72x___-1
and EFC-54x___-1) is 36" wide x 78" high (O.I.C.).
1"
thick, class 1, flame resistant, rigid foam insulation,
closed cell type, 2.0#/cu. ft. density, having a K-factor
of .14 BTU•in/hrft °F and an R-value of 7.1.
Standard
set of double doors (for models
#EFC-72x___-2 are 63" wide x 78" high (O.I.C.).
Minimum
1/16" thick, fiberglass reinforced polyester
laminate (minimum 30% glass content by weight) on
interior surface.
Door
frame is integrally molded within front wall.
Door
hardware consists of:
Continuous
stainless steel piano hinge
White
isophthalic gelcoat finish on interior surface.
Plated
safety stop (crash) chain
CHARACTERISTICS
Stainless
steel cylindrical lockset
Plated
chain and cane bolts (for model
#EFC-72x___-2)
All-weather,
molded one-piece fiberglass reinforced
polyester buildings have the following characteristics:
Neoprene
sponge rubber gasket (weather-stripping)
Insulated
composite construction
Economical
Neoprene
rubber base wiper gasket
Corrosion
resistant
Rugged
Non-corrosive
fasteners
UV
resistant
Light
weight
Virtually
maintenance free
Easy
installation
LEGEND
A.
Exterior FRP laminate with gelcoat finish, min.
1/8" thick.
E.
Neoprene sponge rubber gasket (weather-stripping).
F.
Continuous stainless steel piano hinge.
B.
1" thick polyisocyanurate foam insulation in walls
& ceiling.
G.
Plated cane bolt for passive door.
H.
Astragal (Z-bar style) for passive door.
C.
Interior FRP laminate with gelcoat finish, min.
1/16" thick.
D.
Integral FRP door frame.
LEGEND
1.
Cadmium plated lifting eye - two (2) provided
5.
Stainless steel cylindrical lockset.
2.
Plated safety stop chain.
6.
Plated cane bolt for passive door.
3.
Plated chain bolt for passive door.
7
Neoprene rubber base wiper gasket.
4.
Continuous stainless steel piano hinge.
LEGEND
A.
Exterior FRP laminate with gelcoat finish, min. 1/8" thick.
B.
1" thick polyisocyanurate foam insulation in walls &
ceiling.
C.
Interior FRP laminate with gelcoat finish, min.1/16" thick.
D.
4" wide x 1/4" thick integral FRP base mounting flange.
E.
9/16" diameter predrilled hole for anchor bolt.
ORDERING
INFORMATION
When
ordering please provide the following information:
Model
# and size of building.
Color
of building.
Door
swing (for models #EFC-72x___-1 and EFC-54x___-1).
Active/passive
door position (for model #EFC-72x___-2).